厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

大风区铁路沿线挡风墙积沙机理及优化措施的风洞实验研究

位于兰州至新疆的兰新二线是世界上首条穿越大风区的高速铁路,途径著名的烟墩风区、百里风区、三十里风区及达坂城风区,风区段铁路里程长达 462.4 km,占新疆段线路总长的 65.1${\%}$,大风对铁路的运营、养护和运输造成很大危害. 为了降低大风对通行列车的危害,兰新铁路沿线设置了大量挡风墙. 挡风墙发挥作用的同时,也带来了铁路沿线的积沙问题. 为了解决这一工程实践的现实问题,本文提出了在现有挡风墙背风侧的不同位置处,设立第二道挡墙以减弱铁路积沙的治理思路,并开展了对应条件下对现有单道挡风墙、以及在现有单道挡风墙背风侧坡顶处和坡脚处设置第二道挡墙,共计3种情景的风洞模拟实验,发现设置第二道挡墙后距轨道线路高0.1 m处的沙粒水平速度、数密度、输沙通量及沉积率较无第二道挡墙时明显减少,介于8%$\sim$12${\%}$,51%$\sim$69${\%}$,20%$\sim$73${\%}$以及26%$\sim $38${\%}$,而且在现有单道挡风墙背风侧坡顶部增设第二道挡风墙的效果更好. 因此,本文的研究成果有助于优化大风区已有铁路沿线、城镇等防沙治沙工程措施.      

纤维墙元模型在剪力墙结构非线性分析中的应用

钢筋混凝土剪力墙是目前高层与超高层建筑中最主要的抗侧力构件,本文在对已有的微观及宏观计算模型进行比较的基础上,基于纤维模型概念,建立了便于高层剪力墙结构非线性分析应用的纤维墙元模型,即由承受轴力及弯矩的纤维子单元与承受剪切变形的剪切子单元相合成的墙元计算模型;同时,对该模型中剪切子单元高度的取值进行了分析,明确了其物理含义;推导了单元的刚度矩阵,并分别建立了纤维子单元及剪切子单元的骨架曲线及滞回规则。另外,应用该计算单元模型,对一栋40层框架剪力墙结构进行了非线性时程分析,计算结果与相应模型的振动台试验结果进行了对比,比较结果表明两者在结构动力特性,位移响应方面等均吻合较好,验证了该计算单元模型的准确性与有效性,可为推广使用提供参考。     

一种确定均匀动脉壁面切应力的非线性方法

从Ling和Atabek提出的``局部流'理论出发，提出一种利用测量血液黏度、管轴上 的血流速度、压力和管径波形计算均匀动脉管壁切应力的非线性方法. 将这种方法与柳兆荣 等提出的利用测量血液黏度、管轴上的血流速度和平均管径计算切应力的线性方法比较，结 果表明，当管壁脉动幅度较小时，两种方法计算的压力梯度、流速剖面和管壁切应力差别较 小；而当管壁脉动幅度增大时，两种方法计算的压力梯度、流速剖面和管壁切应力差别增大. 对于小幅脉动均匀动脉，用线性方法计算管壁切应力有较高的精度；而对于大变形 均匀动脉，则需要考虑非线性因素对管壁切应力的影响. 由于作为输入量的血液黏度、轴心 血流速度、压力波形和管径波形可在活体上通过无损伤或微损伤的检测方法得到， 所提出的计算切应力的方法为在体或离体研究切应力与动脉重建的关系提供了方法学基础.     

A SIMPLIFIED CALCULATING METHOD OF NONLINEAR FREQUENCY OF CABLE NET UNDER MEAN WIND LOAD

The cable net supported glass curtain wallas the most advanced technique in dot point supported glass curtain wall, is widely used in China. Because of its large deflection and high nonlinearity under wind load, the dynamic performance of the cable net is greatly different from that of the conventional linear structures. The continuous membrane theory is used to construct the nonlinear vibration differential equation of the cable net, and the harmonic balance method is used to solve the analytic formula of the nonlinear frequency. In order to verify the accuracy of the above analytic formula, the results of the formula and the nonlinear FEM time-history method are compared and found to be in good agreement. Furthermore, the nonlinear vibration differential equation and the nonlinear frequency obtained in this paper are the basis for the wind-induced response analysis of a cable net under fluctuating wind load.     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

光磁共振实验中壁弛豫过程与外磁场的关系

利用改进后的DH807型光磁共振实验装置,在静态磁场下精确测量了抽运信号的弛豫饱和值与外磁场的关系,从而得到壁弛豫速率与外磁场的关系,并建立模型对其原理进行了探讨.     

Free (open) boundary condition: some experiences with viscous flow simulations

The free (or open) boundary condition (FBC, OBC) was proposed by Papanastasiou et al. (A new outflow boundary condition, International Journal for Numerical Methods in Fluids, 1992; 14:587–608) to handle truncated domains with synthetic boundaries where the outflow conditions are unknown. In the present work, implementation of the FBC has been tested in several benchmark problems of viscous flow in fluid mechanics. The FEM is used to provide numerical results for both cases of planar and axisymmetric domains under laminar, isothermal or non‐isothermal, steady‐state conditions, for Newtonian fluids. The effects of inertia, gravity, compressibility, pressure dependence of the viscosity, slip at the wall, and surface tension are all considered individually in the extrudate‐swell benchmark problem for a wide range of the relevant parameters. The present results extend previous ones regarding the applicability of the FBC and show cases where the FBC is inappropriate, namely in the extrudate‐swell problem with gravity or surface‐tension effects. Particular emphasis has been given to the pressure at the outflow, which is the most sensitive quantity of the computations. In all cases where FBC is appropriate, excellent agreement has been found in comparisons with results from very long domains. The formulation for Picard‐type iterations is given in some detail, and the differences with the Newton–Raphson formulation are highlighted regarding some computational aspects. Copyright © 2011 John Wiley & Sons, Ltd.     

DNS of backward‐facing step flow with fully turbulent inflow

Direct numerical simulation (DNS) has been performed to study the channel flow over a backward‐facing step at a Reynolds number Re_b=5600 based on the step height h and the inflow bulk velocity U_b. A dynamic method has been used in order to generate realistic turbulent inflow conditions. The results upstream of the step compared well with the fully developed channel flow. Downstream of the step our results show excellent agreement with experimental data. Copyright © 2009 John Wiley & Sons, Ltd.     

Compressed exponential form for disordered domain wall motion in ultra-thin Au/Co/Au ferromagnetic films

Magnetization reversal in ultra-thin Au/Co/Au films deposited on single crystal silicon (1 0 0) was investigated using Kerr microscopy. In the considered ultra-thin Co films, with a thickness between 0.7 and 1 nm, the coercivity and magnetic anisotropy decrease with decrease in cobalt layer thickness and the magnetization reversal dynamics is dominated by disordered domain wall motion. An analysis of the observed magnetization reversal dynamics is proposed, starting from the Fatuzzo-Labrune model. We show that the relaxation curves of these samples are well described by a function obtained by a technical transformation of Fatuzzo-Labrune model in the regime dominated by domain wall motion.