Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

Boundary control of a hyperbolic system with time lags

This paper considers an optimal boundary control problem fora hyperbolic system in which constant time lags appear in thestate equation and in the boundary condition simultaneously.Making use of Lion's scheme, necessary and sufficient conditionsof optimality for the Neumann problem are derived.     

The response of microstructure to processing in a series of poly(siloxaneimide) copolymers

Poly(siloxaneimide) (PSI) segmented copolymers exhibit organized microdomains if the blocks are sufficiently incompatible. As with neat diblock and triblock copolymers, the processing route employed to prepare films of PSI materials is expected to influence the dimensions and/or morphology of the resultant microstructure. In this work, small-angle neutron scattering (SANS) is utilized to characterize the disordered microstructure found in films of a series of PSI copolymers which are subjected to solvent casting and various thermal treatments. Microstructural dimensions such as the periodicity and correlation length are deduced from the Teubner-Strey (TS) model for disordered microemulsions. The scattering intensity of each copolymer up to q = 5.0 nm^?1, where q is the scattering vector, is found to scale as q^?2.8+?0.1. Results indicate that processing the materials as cast films or as melt-pressed films allowed to cool slowly has a small, but discernible, effect on microstructural characteristics. SANS profiles of films quenched from elevated temperatures reveal a clear transition in microdomain periodicity, which correlates well with the glass transition temperature of the imide microphase in these and other materials of similar chemical structure. © 1993 John Wiley & Sons, Inc.     

Markovian network processes: Congestion-dependent routing and processing

A Markovian network process describes the movement of discrete units among a set of nodes that process the units. There is considerable knowledge of such networks, often called queueing networks, in which the nodes operate independently and the routes of the units are independent. The focus of this study, in contrast, is on networks with dependent nodes and routings. Examples of dependencies are parallel processing across several nodes, blocking of transitions because of capacity constraints on nodes, alternate routing of units to avoid congestion, and accelerating or decelerating the processing rate at a node depending on downstream congestion. We introduce a general network process representing the numbers of units at the nodes and derive its equilibrium distribution. This distribution takes the form of a product of functions of vectors in which the arguments of the functions satisfy an interchangeability property. This new type of distribution may apply to other multi-variate processes as well. A basic idea in our approach is a linking of certain micro-level balance properties of the network routing to the processing rates at the nodes. The link is via routing-balance partitions of nodes that are inherent in any network. A byproduct of this approach is a general characterization of blocking of transitions without the restriction that the process is reversible, which had been a standard assumption. We also give necessary and sufficient conditions under which a unit moving in the network sees a time average for the unmoved units (called the MUSTA property). Finally, we discuss when certain flows between nodes in an open network are Poisson processes.This research was sponsored in part by Air Force Office of Scientific Research contract 84-0367.     

On the reliability of unsaturated hydraulic conductivity calculated from the moisture retention curve

In comparison with direct measurements of unsaturated hydraulic conductivity, the methods of calculations from the moisture retention curve are attractive for their fast and simple use and low cost. These are the main reasons for their increasing use, mainly in spatial variability studies. On the other hand, it is known that their applicability is limited. The possibility of the use of the retention curve to indirectly determine hydraulic conductivities is analyzed as follows. The theoretical derivation of the relationK(h) – (h) is briefly discussed with regards to potential sources of inaccuracy. The sensitivity of the algorithm forK(h) calculation is studied as a response to possible inaccuracies in the retention curve determination. Conclusions about the usability of calculated hydraulic conductivities are drawn.     

甲烷分子在碱性催化剂上的吸附与酸碱活化机理

以碳酸锶为甲烷吸附活化的模型催化剂，用切换变应答、ＣＨ４（ＣＯ２）－ＴＰＤ等技术，对甲烷的吸附、碱性对催化剂性能的影响进行了研究，结果表明，甲烷在碳酸锶上的活化显示出明显的酸碱活化机理特征，瞬变应答及ＴＰＤ结果均证明，甲烷在碳酸锶表面有较强的吸附，其脱附温度约３１０℃，关联结果表明，甲烷转化率及Ｃ２烃收率与催化剂表面ＳｒＯ碱性中心浓度有非常一致的顺变关系，因此催化剂表面的酸碱中心可能是甲烷的选择活     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

低电流密度下恒电流法制备的聚苯胺修饰电极

研究了低电流密度下恒电流法制备的聚苯（ＰＡ）修饰电极的性质及其影响因素，探讨了低电流密度聚合的ＰＡ膜的优点。发现此种条件下聚合的ＰＡ膜具有较好的电荷传输能力，它不仅对Ｂｒ＾－，Ｔｌ＾＋／Ｔｌ等电对的氧化还原反应有更好的电催化活性，而且对Ｈ＾＋的Ｎｅｒｎａｓｔ响应也更接近理论值。     

对NO生理作用的新认识及其电化学实时检测

本文综述了近年来学术界对ＮＯ生理作用的新认识，并介绍了现场实时检测生物活体中释放的ＮＯ浓度的电化学方法．