193 nm氟化物增透膜的特性

 为了研制低损耗、高性能的193 nm氟化物增透膜,研究了基底和不同氟化物材料组合对氟化物增透膜的影响。在熔石英基底上,将挡板法和预镀层技术相结合,采用热舟蒸发方式制备了不同氟化物材料组合增透膜,对增透膜的剩余反射率和光学损耗等光学特性,以及表面粗糙度和应力等特性进行了测量和比较。在分析比较和优化的基础上,设计制备的3层1/4波长规整膜系AlF3/LaF3增透膜在193 nm的剩余反射率低于0.14%,单面镀膜增透膜的透射率为93.85%,增透膜表面均方根粗糙度为0.979 nm,总的损耗约为6％。要得到高性能的193 nm增透膜,应选用超级抛光基底。     

基于双芯光纤耦合器的梳状滤波器及其CO2激光调节

基于光纤耦合器的波长特性,分析了光纤耦合器作为梳状滤波器的光谱特性;将长度不同的双芯光纤(twin-core fiber,TCF)熔接在两根单模光纤(single mode fibors,SMF)之间,实验制得具有不同峰值波长间隔的基于双芯光纤耦合器的全光纤型梳状滤波器,其消光比可达25 dB. 首次使用CO₂激光对其进行光谱调节,调节导致光谱向长波方向漂移和消光比的变化. 这种调节是基于CO₂与光纤相互作用时的残余应力释放和熔融变形机理,使用氢载TCF可以在相同实验参数下得到更大的波长调节激光. 关键词： 双芯光纤耦合器 梳状滤波器 2激光')" href="#">CO₂激光 残余应力     

利用法布里-珀罗腔抑制电光相位调制中的剩余幅度调制

激光经电光相位调制后,由于剩余幅度调制的存在造成调制边带幅度不相等。利用法布里-珀罗腔的透射特性和Pound-Drever-Hall技术对通过法布里-珀罗腔的调制光正、负一级边带的幅度产生不同的衰减,使得调制边带的幅度相等,从而实现对电光相位调制中剩余幅度调制的抑制。采用该方法,理论上计算了调制光经法布里-珀罗腔后的光外差光谱信号,获得锁定法布里-珀罗腔后调制边带幅度的不对称度较腔锁定前减小四个数量级。实验研究了调制光经法布里-珀罗腔透射的光外差光谱,结果表明将法布里-珀罗腔锁定于该透射光外差光谱中心零位时,对剩余幅度调制的抑制程度可达45 dB。     

基于双核模型对超重元素合成机制的研究

在双核模型基础上，考虑了熔合与准裂变的竞争，通过数值法求解主方程，计算了⁵⁰Ti，⁵⁸Fe+²⁰⁸Pb，²⁰⁹Bi这4个反应系统通过冷熔合反应合成超重元素的激发函数，得到了与实验比较符合的结果.计算了不同入射能量时各角动量分波对熔合概率和超重核存活概率的影响以及对蒸发剩余截面的贡献.这些结果对进一步理解超重核的合成机制有重要意义. 关键词： 超重元素 双核模型 熔合反应 蒸发剩余截面     

残余散光的计算

眼镜轴向的不正确将产生与眼睛散光轴向不同的残余散光。本文用柱镜矢量计算了残余散光的光焦度和轴向，并得出不同散光值所允许的轴向偏离值。     

Accurate Measurement of Small Spin–Spin Couplings in Partially Aligned Molecules Using a Novel J-Mismatch Compensated Spin-State-Selection Filter

The accurate measurement of small spin–spin coupling constants in macromolecules dissolved in a liquid crystalline phase is important in the context of molecular structure investigation by modern liquid state NMR. A new spin-state-selection filter, DIPSAP, is presented with significantly reduced sensitivity to J-mismatch of the filter delays compared to previously proposed pulse sequences. DIPSAP presents an attractive new approach for the accurate measurement of small spin–spin coupling constants in molecules dissolved in anisotropic solution. Application to the measurement of ¹⁵N–¹³C′ and ¹H^N–¹³C′ coupling constants in the peptide planes of ¹³C, ¹⁵N labeled proteins demonstrates the high accuracy obtained by a DIPSAP-based experiment.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

Measurement of Residual Dipolar Couplings of Organic Molecules in Multiple Solvent Systems Using a Liquid-Crystalline-Based Medium

Residual dipolar coupling (RDC), a robust anisotropic NMR parameter for structural elucidation of organic molecules, is only accessible in an anisotropic environment. Herein, we introduce a novel alignment medium based on the molecular self-assembly of oligopeptide amphiphile (OPA). This medium is compatible with different intermediate and polar solvent systems, such as CD₃OD, [D₆]DMSO, and D₂O. The preparation of the OPA-based medium is simple and rapid, while only very weak background signals were observed from OPAs. Furthermore, we show that the purity of OPA has only a minor influence on the quality of the RDC data. These advantages allow RDC measurements of organic molecules with different polarities and solubilities with high efficiency and accuracy.