Dynamic stability of externally pressurized elastic rings subjected to high rates of loading

Of interest here is the influence of loading rate on the stability of structures where inertia is taken into account, with particular attention to the comparison between static and dynamic buckling. This work shows the importance of studying stability via perturbations of the initial conditions, since a finite velocity governs the propagation of disturbances. The method of modal analysis that determines the fastest growing wavelength, currently used in the literature to analyze dynamic stability problems, is meaningful only for cases where the velocity of the perfect structure is significantly lower than the associated wave propagation speeds.     

The first principles investigation of ferrite magnetic response with mismatch stress

The quasi-ferrite model is proposed and an appropriate PBE exchange functional with the spin density functional theory(SDFT) is selected for the calculation of the relation between magnetic moment and residual stress in ferrite using a quantum mechanics code. The relationship between ferrite magnetism and the carbon content is determined,and then a ferrite interstitial solid solution(ISS) model in a low carbon concentration state is replaced with an α- Fe model in the case of majority magnetic calculation. The band structure of the loaded-Fe is compared with that of the unloaded α-Fe. The comparison shows that the energy of Fe atomic 3d orbital changes a little,while the energy of electron orbital of iron core below 3d almost keeps unchanged. The relationship between the magnetic moment and the stress appears intermittent due to the Bragg total reflection. The change in the magnetic moment due to lattice mismatch is much larger than that caused by mechanical loading.     

Measuring grain rotation at the nanoscale

In this paper, we introduced a method to measure grain rotation of nanomaterials under external stress using a high pressure diamond anvil cell and the Laue microdiffraction technique at a synchrotron facility. We used tungsten carbide marker crystals to investigate grain rotation activities of 3 and 500?nm nickel media. Our results show that the grain rotation of 3 and 500?nm nickel nanocrystals increase with pressure and finally rotation of 500?nm nickel tends to stop at a lower pressure/stress level than 3?nm nickel. 3?nm nickel nanocrystals show a higher rotation magnitude than 500?nm nickel nanocrystals. Our measurements show an effective method to study the grain rotation of nanomaterials especially in ultrafine nanocrystals.     

Some properties and applications of cumulative Kullback–Leibler information

The cumulative Kullback–Leibler information has been proposed recently as a suitable extension of Kullback–Leibler information to the cumulative distribution function. In this paper, we obtain various results on such a measure, with reference to its relation with other information measures and notions of reliability theory. We also provide some lower and upper bounds. A dynamic version of the cumulative Kullback–Leibler information is then proposed for past lifetimes. Furthermore, we investigate its monotonicity property, which is related to some new concepts of relative aging. Moreover, we propose an application to the failure of nanocomponents. Finally, in order to provide an application in image analysis, we introduce the empirical cumulative Kullback–Leibler information and prove an asymptotic result. Copyright © 2015 John Wiley & Sons, Ltd.     

顶空气相色谱法测定瑞替加滨原料药中残留溶剂

建立了测定瑞替加滨原料药中残留溶剂乙醇、正己烷、四氢呋喃、三乙胺的顶空气相色谱方法。采用氢火焰离子化检测器,以N,N-二甲基甲酰胺为样品溶剂,通过对色谱条件优化,建立了以DB-624为分析柱、110℃为平衡温度、15 min为平衡时间的残留溶剂测定方法。经方法学验证,上述4种溶剂的方法检出限依次为0.007 5%、0.000 48%、0.002 4%、0.01%;峰面积的相对标准偏差均小于2.1%;平均回收率为100%～102%;4种溶剂的线性系数均大于0.995。结果表明,该方法的检测灵敏度高、精密度好、准确度高、线性关系良好,能够满足对瑞替加滨质量的控制要求。将该方法应用于3批瑞替加滨原料药的残留溶剂检测,均只检出乙醇和正己烷,且乙醇和正己烷的最高残留量分别为0.149%和0.022%,均未超出限量规定。     

CHARMM36 all‐atom additive protein force field: Validation based on comparison to NMR data

Protein structure and dynamics can be characterized on the atomistic level with both nuclear magnetic resonance (NMR) experiments and molecular dynamics (MD) simulations. Here, we quantify the ability of the recently presented CHARMM36 (C36) force field (FF) to reproduce various NMR observables using MD simulations. The studied NMR properties include backbone scalar couplings across hydrogen bonds, residual dipolar couplings (RDCs) and relaxation order parameter, as well as scalar couplings, RDCs, and order parameters for side‐chain amino‐ and methyl‐containing groups. It is shown that the C36 FF leads to better correlation with experimental data compared to the CHARMM22/CMAP FF and suggest using C36 in protein simulations. Although both CHARMM FFs contains the same nonbond parameters, our results show how the changes in the internal parameters associated with the peptide backbone via CMAP and the χ₁ and χ₂ dihedral parameters leads to improved treatment of the analyzed nonbond interactions. This highlights the importance of proper treatment of the internal covalent components in modeling nonbond interactions with molecular mechanics FFs. © 2013 Wiley Periodicals, Inc.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphane Oxides

A series of tris‐aryl phosphane oxides existing as residual enantiomers or diastereoisomers with substituents on the aryl rings differing in size and electronic properties were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation and reduction potentials together with those of the corresponding “blade bromides” (i.e., the naphthalene derivatives displaying the same substitution pattern of the tris‐naphthyl phosphane oxide blades, with a bromo substituent where the phosphorus atom is located) determined by CV. The residual stereoisomeric phosphane oxides were isolated in a stereochemically pure state and were found to be highly configurationally stable at room temperature (stereoisomerization barriers of about 27 kcal mol^?1). The chiroptical properties of the residual stereoisomers and the assignments of absolute configuration are discussed. The configurational stability of residual tris‐aryl phosphane oxides was found to be scarcely influenced by the electronic properties of the substituents present on the aromatic rings constituting the blades, while steric effects play the most relevant role. Detailed theoretical calculations are in agreement with the experimental results and also contribute to a rational interpretation of the stereodynamics of these systems.