液态结构与性质关系Ⅲ——剩余键理论模型

利用剩余键的思想, 通过数学推导, 建立定量描述金属熔体结构与黏度关系的物理模型, 提出黏度的微观结构变化特性为熔体剩余键结构尺寸d的演变; 应用建立的模型理论计算液相线以上一定温区镁熔体和铝熔体的运动黏度, 得到函数关系式分别为v_Mg=3.17×10^-7+3.04×10^-7· d和v_Al=1.65×10^-7+1.05×10^-7·d, 这与采用坩埚扭摆振动法的实验测量结果相符合. 该模型从化学结合键角度揭 示了金属熔体的结构微观不均匀性及其黏度的微观物理本质, 为金属熔体黏度的理论计算提供了一种新的途径. 这对于深入认识液态金属的微观结构及其与宏观物性之间的关系具有重要意义.     

基于随机效应Wiener退化模型的剩余寿命预测

针对退化率较高的产品具有不稳定的退化路径以及产品个体差异对退化过程的影响,建立了一种新的随机效应退化模型,即漂移参数和扩散参数均为随机变量且两者之间呈线性关系的Wiener退化过程模型.基于该模型获得了产品剩余寿命分布与可靠度函数,同时设计了估计模型参数的EM（expectation maximization）算法.最后,通过分析钛合金疲劳裂纹数据以及与现有模型结果的比较,验证了所建模型的有效性和准确性.     

Atomic short-range order in CuMn alloys

The establishment of atomic short-range order (SRO) has been investigated in CuMn alloys (5, 8,13,16,20 at. % Mn) by measurement of the electrical resistivity during isochronal and isothermal annealing. An increasing degree of SRO is accompanied by a reduction of resistivity; this effect increases with Mn concentration. For 8,13 and 16 at. % Mn SRO kinetics turn out to deviate significantly from single exponential behavior with a maximum at 13 at. % Mn, whereas at 5 and 20 at. % Mn SRO is adjusted in a single exponential process. For data analysis three methods are used: a sum of two and three exponentials as well as a log-normal spectrum of relaxation times. The strong interaction between second-nearest-neighbor atoms in CuMn seems to be essential for SRO kinetics but of minor importance for the value of SRO-induced resistivity change.     

New strain standards for glass-ware stress photoelastic evaluation

Strain viewers are used for residual strain evaluation and assessment of glassware. Most viewers are the crossed-nicol type photoelastic apparatus with tint plates, in which the tint colour in the field of view changes with the insertion of strained glassware. Strain standards, which give known or predetermined optical path differences, are necessary for qualitative evaluation of residual internal stress in glassware. Two types of new strain standards, namely rotary-plate type and film-array type, are proposed and presented in detail.     

Dynamic Behavior of Rigid–Plastic Sector Plates

The paper studies the dynamic behavior of perfect rigid-plastic plates in the form of a sector with hinged or clamped sides under short-term intensive loads. Two dynamic deformation mechanisms are demonstrated. The dynamic equation is derived for each of the mechanisms. The realization conditions for the mechanisms are analyzed. Analytical expressions are derived for the ultimate (high) loads and the maximum residual deflection. Numerical examples are given     

Mesoscale strain measurement in deformed crystals: A comparison of X-ray microdiffraction with electron backscatter diffraction

Mapping of residual stresses at the mesoscale is increasingly practical thanks to technological developments in electron backscatter diffraction (EBSD) and X-ray microdiffraction using high brilliance synchrotron sources. An analysis is presented of a Cu single crystal deformed in compression to about 10% macroscopic strain. Local orientation measurements were made on sectioned and polished specimens using EBSD and X-ray microdiffraction. In broad strokes, the results are similar to each other with orientations being observed that are on the order of 5° misoriented from that of the original crystallite. At the fine scale it is apparent that the X-ray technique can distinguish features in the structure that are much finer in detail than those observed using EBSD even though the spatial resolution of EBSD is superior to that of X-ray diffraction by approximately two orders of magnitude. The results are explained by the sensitivity of the EBSD technique to the specimen surface condition. Dislocation dynamics simulations show that there is a relaxation of the dislocation structure near the free surface of the specimen that extends approximately 650 Å into the specimen. The high spatial resolution of the EBSD technique is detrimental in this respect as the information volume extends only 200 Å or so into the specimen. The X-rays probe a volume on the order of 2 µm in diameter, thus measuring the structure that is relatively unaffected by the near-surface relaxation.     

剩余交和一般剩余交的几个性质

本文给出了剩余交和一般剩余交的几个性质，主要讨论了剩余交的ＧＣＭ性和在形变下的变化情况，并讨论了一般剩余交的ＧＣＭ性，ＣＭ性和可光滑性等．     

移动荷载作用下地基动力分析的有限元方法

通过对地基动力问题的基本方程进行变换,把基本方程变换到随荷载移动的运动坐标系中,通过加权残数法推导了相应的单元刚度矩阵,从而建立了移动问题的有限元格式,并发现移动荷载问题的单元刚度矩阵是对相应静力问题单元刚度矩阵的修正,在静力单元刚度矩阵的主对角元素上增加与移动速度有关的项,即可得到移动问题有限元的单元刚度矩阵,这样就将动力学问题转化为“拟静力”问题处理。文中用移动问题有限元方法计算了地基的动力响应,并与解析解进行了对比,以说明本方法具有较好的精度。     

振动时效的动应力判据

采用多元非线性回归分析方法，求得振动时效试验中动应力σｄ，载荷次数ｎ和残余应力当量ｋ对消应力效果εｖ的经验方程。从而实现用动应力现场速测来定量评定振动时效工艺效果。本文主要介绍动应力判据方程的建立方法及其应用。     

A physics-constrained deep residual network for solving the sine-Gordon equation

Despite some empirical successes for solving nonlinear evolution equations using deep learning,there are several unresolved issues.First,it could not uncover the dynamical behaviors of some equations where highly nonlinear source terms are included very well.Second,the gradient exploding and vanishing problems often occur for the traditional feedforward neural networks.In this paper,we propose a new architecture that combines the deep residual neural network with some underlying physical laws.Using the sine-Gordon equation as an example,we show that the numerical result is in good agreement with the exact soliton solution.In addition,a lot of numerical experiments show that the model is robust under small perturbations to a certain extent.