质谱法测定冰毒

采用直接进样化学电离（ＣＩ）质谱法，配合电子轰击（ＥＩ）及气相色谱－质谱联用（ＧＣ／ＭＳ）技术，测定了冰毒及其制备过程中的副产品与中间产物，为刑侦破案提供了依据。     

Mass spectrometric study of thermal stability of copper(II) bis(dipivaloylmethanate) vapour

The processes of thermal destruction of copper(II) bis(dipivaloylmethanate) (Cu(dpm)₂) in the temperature range 150°–550°C were studied by using a two-temperature variant of a double chamber Knudsen cell, with mass spectrometric recording of the gas-phase composition. The temperature range of stability of the vapour of the complex in vacuum was determined, as were those of its mixtures with oxygen in different proportions. The temperature dependence of the rate constant of the thermolysis of (Cu(dpm)₂) vapour was obtained. The thermal stability of Hdpm vapour and the influence of oxygen on the thermolysis of the ligand were studied.

---

Zusammenfassung Unter Verwendung einer Zweitemperaturenvariante der Knudsenschen Doppelkammerzelle wurde mittels MS-Untersuchung der Gasphasenzusammensetzung im Temperaturbereich 150°–550°C der thermische Abbau von Kupfer(II)-bis(dipivaloylmethanat) (Cu(dpm)₂) untersucht. Es wurde der Temperaturbereich für die Stabilität der gasförmigen Komplexe in Vakuum sowie in Gemischen mit Sauerstoff in verschiedenen Verhältnissen bestimmt. Dabei wurde die Temperaturabhängigkeit der Geschwindigkeitskonstante für die Thermolyse von Cu(dpm)₂ ermittelt. Weiterhin wurde die thermische Stabilität von Hdpm-Dampf sowie der Einfluß von Sauerstoff auf die Thermolyse der Liganden bestimmt.

     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Tandem GC/MS: A useful tool for studying end-capping reactions of oligo(styryl)lithium anions

Anionic living polymerization methods, using organometallic initiators such as butyllithium reagents, have proven useful for, inter alia, styrene polymerization and are amenable to subsequent functionalization of poly(styryl)lithium in the termination step. In this study, general methods for the selective preparation of small styrene oligomers and termination of the intermediate oligo(styryl)lithium anions were investigated. The crude reaction mixtures were analyzed directly by tandem gas chromatography/mass spectrometry (GC/MS). Of the carbon- and silicon-based electrophiles tested, chloro(chloroalkyl)silanes, Cl-SiR₂(CH₂)_nCl in particular, were shown by GC/MS to be regioselective end-capping reagents, thus allowing subsequent transformation to the primary amine. The combined GC/MS data allow not only an estimate of the degree of functionalization, but also the identification of by-products, thus providing insight into the end-capping process that otherwise might be difficult to access. © 1995 John Wiley & Sons, Inc.     

An investigation into the self-propagating high temperature synthesis (SHS) of superconducting ceramics by thermal methods

The SHS route is based on the well-known thermite reaction, in which a strongly exothermic reaction can sustain itself and propagate in the form of a combustion wave until the reactants have been completely consumed. The successful application of the method to the synthesis of superconducting ceramics of stoichiometry RBa₂Cu₃O_y (R=Y, Er, Yb) is reported. The 123 phase was obtained when pellets of R₂O₃, BaO₂ and Cu metal in the correct proportions were dropped into a heater held at 800°C in an oxygen atmosphere and left there for only 10 minutes. Thermal methods (DSC and DTA) are excellent techniques with which to investigate the dependence of the reaction on heating rate, atmosphere and starting composition.     

Kinetic aspects of the Diels-Alder reaction between poly(styrene-co-furfuryl methacrylate) and bismaleimide

The crosslinking Diels-Alder reaction between styrene-furfuryl methacrylate copolymer samples (poly(ST-co-FM)) and bismaleimide (BM) at 25 °C in chloroform was studied by following the decay in UV absorbance of the maleimide (MI) group at 320 nm. Reaction conditions were changed by using copolymers with different mole fraction of FM, F_FM, and by employing different initial molar ratios of reactants (furan group within FM and MI group within BM). Second order kinetics were obeyed. ¹³C NMR spectra showed that, even when all reactants had been converted to an insoluble crosslinked network, unreacted MI groups remained, presumably in the form of singly reacted pendant BM molecules. The fractions of MI groups remaining unreacted were found to be 0.49, 0.34 and 0.22 for FM:MI mole ratios in the initial mixture of 2, 1 and 0.5 respectively, when using a copolymer of F_FM=0.1354. An attempt was also made to follow the kinetics of network formation by ¹³C NMR spectroscopy, using the peak areas for reacted and unreacted MI and FM groups, but many of the findings were subject to some uncertainty for reasons, which are discussed. However, because the peak areas were considered reliable for unreacted MI groups, the rate constant, k, was evaluated, thereby. Overall using UV and NMR the values of k lay within the interval (0.8-3.6) × 10⁻⁵ dm³ mol⁻¹ s⁻¹.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

Summary. The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.     

Stereochemistry of ketone olefination with methyl trimethylsilylacetate

High (Z)-stereoselectivity of olefination of methyl α-phenylthioalkyl and methyl α-phenylthioalkenyl ketones with methyl trimethylsilylacetate decreases in the case of ketones containing a higher alkyl-substituent in place of the methyl group. Dedicated to Corresponding Member of the Russian Academy of Sciences E. P. Serebryakov on the occasion of his 70th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 1020–1021, April, 2005.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Novel alginate-poly(L-histidine) microcapsules as drug carriers: in vitro protein release and short term stability

Spherical, smooth-surfaced and mechanically stable alginate-poly(L-histidine) (PLHis) microcapsules with narrow particle size distributions were prepared by incubating calcium alginate beads in aqueous solutions of PLHis. The in vitro release characteristics, drug loading and encapsulation efficiency of the microcapsules were investigated using bovine erythrocytes hemoglobin (Hb) as a model drug. The results showed that the concentration of Ca(2+) ions had a considerable effect on the drug loading, encapsulation efficiency and in vitro release behavior of the microcapsules. When the concentration of CaCl(2) in the PLHis solution was increased from 0 to 3.0% (w/v), the drug loading and encapsulation efficiency decreased significantly from 38.0 to 4.3% and from 92.9 to 8.0%, respectively, while the total cumulative release of Hb from microcapsules in phosphate buffered saline solution (PBS, pH 6.8) decreased from 96.2 to 72.8% in 24 h. No significant protein release was observed during 70 h of incubation in hydrochloric acid solution (pH 1.2). However, under neutral conditions (PBS, pH 6.8), the Hb was completely and stably released within 24-70 h. An explosion test showed that the stability of alginate-PLHis microcapsules depended strongly on the concentration of PLHis and the calcium ions in solution. [Diagram: see text] Microscopy photo of Hb-loaded alginate-PLHis microcapsules.