不同材料弹体超声速侵彻钢筋混凝土靶的结构破坏对比实验

设计了超声速钻地结构弹,采用203 mm口径的火炮,开展了25 kg量级弹体在1100~1300 m/s速度范围内侵彻钢筋混凝土靶的实验研究,应用数值仿真对弹体侵彻钢筋混凝土靶的过程进行了模拟计算。基于实验和仿真结果,对超声速侵彻条件下两种金属材料弹体的结构响应、质量损失等问题进行了分析。结果表明:在超声速侵彻钢筋混凝土靶的过程中,两种金属材料的弹体结构变形破坏形式主要为头部侵蚀和侧壁磨蚀,头部侵蚀量的大小与弹体壳体材料有关,高强度G50钢材料更适合用于1200 m/s速度量级的超声速侵彻环境。对出现的“径缩”现象作了初步分析,并对今后工程应用的结构弹体设计提出了指导意见。     

On the sensitive dynamical system and the transition from the apparently deterministic process to the completely random process

The detailed analysis of the dynamical process of coin tossing is made. Through calculations, it is illustrated how and why the result is extremely sensitive to the initial conditions. It is also shown that, as the initial height of the mass center of the coin increases, the final configuration, i.e. head or tail, becomes more and more sensitive to the initial parameters (the initial velocity angular velocity, and the initial orientation), the coefficient of the air drag, and the energy absorption factor of the surface on which the coin bounces. If we keep the head upward initially but allow a small range for the change of some other initial parameters, the frequency that the final configuration is head, would be 1 if the initial height h of the mass center is sufficiently small, and would be clo to 1/2 if h is sufficiently large. An interesting question is how this frequency changes continuously from 1 to 1/2 as h increases. Detailed calculations show that such a transition is very similar to the transition from laminar to turbulent flows. A basic difference between the transition stage and the completely random stage is indicated: In the completely random stage, the deterministic process of the individual case is extremely sensitive to the initial conditions and the dynamical parameters, out the statistical properties of the ensemble are insensitive to the small changes of the initial conditions and the dynamical parameters. On the contrary, in the transition stage, both the deterministic process of the individual case and the statistical properties of the ensemble are sensitive to the initial conditions and the dynamical parameters. The mechanism for this feature of the transition stage is the existence of the long-train structure in the parameter space. The illuminations of this analysis on some other random phenomena are discussed.     

Acoustic modeling of perforated concrete using the dual porosity theory

Perforated concrete shows nowadays a high potential for many construction and building engineering applications. This work is devoted to the analysis of the acoustic properties of perforated concrete made from arlite lightweight aggregates. Concrete produced from these materials is an environmentally friendly alternative to traditional materials and offers a higher durability, excellent strength-to-weight ratio and low cost. In particular, it is shown that the acoustic behavior of perforated concrete can be modeled using a dual porosity approach based on the knowledge of the non-acoustic properties of the matrix granular material and geometrical data. To this end, various non-perforated and perforated samples were prepared and characterized in an experimental test facility, their acoustic properties being determined through the transfer function impedance tube method. Experimental and estimated results related to the acoustic properties of a number of prepared specimens are presented, showing a good agreement. Results suggest that this approach is suitable for practical design of such materials as part of noise control systems.     

Evidence of Dynamical Fluctuation of Target Residues in Relativistic Nuclear Interaction at 14.5 AGeV

An analysis of data of target fragments of ²⁸Si-AgBr (at 14.5 AGeV) reveals the existence of emission asymmetry in the azimuthal plane, which is found to depend on the number of target fragments. The comparison with the data of ³²S-AgBr (at 200 AGeV) and ¹⁶O-AgBr (at 60 AGeV) interactions indicates that emission asymmetry depends on the projectile mass and energy.     

MAFF — The Munich accelerator for fission fragments

At the new high flux reactor FRM-II in Munich the accelerator MAFF (Munich accelerator for fission fragments) is under design. In the high neutron flux of 10¹⁴ n/cm² s up to 10¹⁴ neutron-rich fission fragments per second are produced in the 1 g U-235 target. Ions with an energy of 30 keV are extracted from the ion source. In the mass separator two isotopes can be selected. One of the beams is used for low energy experiments, the other one is injected into an ECRIS (or EBIS) for charge breeding to a q/A≥0.16. A gas filled RFQ cooler is used for emittance improvement. The subsequent LINAC delivers beams with an energy ranging from 3.7 MeV/u to 5.9 MeV/u. New IH structures are being developed at the Munich tandem laboratory. A small storage ring is planned in a further stage to recycle the fission fragments. A thin target foil can be placed into this ring, e.g., for synthesis of super-heavy elements. The through-going beam tube has been installed in the heavy water tank of the reactor. Tests of the target ion source in a special oven to test long term stability and safety tests were in progress.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

平面调制靶的表面起伏图形研制

表面起伏靶是惯性约束聚变（ＩＣＦ）分解实验中的重要实验用靶。本文报导了采用离子束刻蚀和激光干涉两种方法制备初始微扰振幅和波长分别在几微米和几十微米范围的正弦调制形状；摸索了相应的工艺条件和工艺过程；用台阶仪及光学显微轮廓仪测微加工后的形貌；探讨了调制波长的精确控制与干涉工艺之间的关系。     

惯性约束聚变点火靶候选靶丸特点及制备研究进展

获得能量增益实现点火是目前激光惯性约束聚变领域研究的主要方向和标志性成果. 在点火靶的设计中有多种可能的候选靶丸,包括碳氢掺杂锗、铍掺杂铜、聚酰亚胺、 碳化硼和金刚石靶丸,其中碳氢和铍靶丸是最主要的候选靶丸.文中主要总结了几种候选靶丸的优缺点及目前研制现状.在国外,碳氢靶丸是目前点火靶的首选靶丸. 与铍靶丸相比,不存在明显的微结构缺陷,制备较容易;靶丸光学透明, 适宜于燃料分层和表征;靶丸在制备上更容易达到点火靶要求. 美国的碳氢点火靶靶丸基本达到了设计要求,这些要求包括几何尺寸、壳层密度、 壳层缺陷、表面光洁度、掺杂水平和杂质含量等.我国的点火靶靶丸研究还处在起步阶段.     

超强激光场物理学

首先,评述了超强激光场的理论结果;其次,描述了超短光脉冲在密的气体和光学介质传播中的自作用;第三,评述了强场离化无碰撞等离子体中高度离化的离子产生,及高功率超短激光脉冲巨大强度的电场可用于电子加速;第四,分析了超短声脉冲和无线电脉冲的产生和应用,讨论了在不同条件下,激光辐射谐波和 Ｘ 射线激光的产生,进一步评述了超强激光脉冲与凝聚靶相互作用可以产生接近星体物质参数的高温、超密、强磁场和巨大压力等离子体;最后,简要叙述了激光激发核、核反应,高能电子─光子相互作用的可能效应及可能进行的实验。     

钢筋腐蚀监测的光波导传感方法原理探索

本文提出了一种用于混凝土结构钢筋腐蚀监测的光波导传感方法,该方法利用金属膜层局部取代光波导的介质包层,构成腐蚀敏感膜,从而获取金属腐蚀信息.本文依据波导理论讨论了该方法的原理,利用电化学方法在721比色皿的石英玻璃上证实了平面光波导腐蚀传感方案的可行性,并进一步用电镀方法制备出了光纤腐蚀传感器(FOCS)实验样品,取得了预期实验结果.