某工程地基基坑支护探讨

软土地基中的支护是基础工程的关键,在节约成本的前提下,选择合理的支护结构至关重要．通过对某公司将要开发的2个基坑支护方案的项目进行的相关分析、计算和探讨,总结出了软土地基中的基坑支护方案的选择原则及其相对应的施工措施等．     

人造金刚石与硬质合金复合材料的研制

 本实验选用TiH₂及其它微量元素做粘结剂，在DS-029B型六面顶压机上烧结人造金刚石与硬质合金复合材料。实验中，采取TiH₂脱氢与金刚石净化同时进行的工艺，在高真空和一定温度下脱氢，得到高活性的新鲜钛，使其具有更强的粘结作用，以获得高磨耗比的金刚石复合材料。实验中比较了不同净化温度对磨耗比的影响；同一种粘结剂不同含量与磨耗比之间的关系；同时还测试了其耐热性及时间极限。结果表明，这种复合材料在850 ℃下，加热3 min，磨耗比没有明显改变。     

纳米金属氧化物：复合分散法制备及分散性

通过采用水热晶化与荷电复合分散法制备γ-AlOOH、R-TiO₂和α-Al₂O₃纳米晶体粉末,利用TEM和激光粒度分析仪等手段研究了纳米颗粒水热晶化与荷电复合分散的分散效果及其工艺条件,并探讨了金属氧化物纳米颗粒水热晶化与荷电复合分散机理。结果表明,晶化与荷电复合分散可明显改善金属氧化物纳米颗粒在液相中的分散稳定性,所制得的AlOOH、TiO₂和Al₂O₃纳米颗粒在水中分散放置24 h后的透光率的变化率D₂₄还可分别保持为94.1%、87.7%和82.2%;在水中分散后的粒径分布统计的平均粒径分别为67、70和143 nm。     

炭纤维织物/环氧树脂基复合材料的摩擦磨损性能研究

研究了炭纤维织物/环氧(CF/EP)复合材料与45#钢在环-环端面干摩擦状态下的摩擦磨损特性,考查了制备工艺和MoS2与石墨不同配比等对CF/EP复合材料干摩擦性能的影响,采用扫描电子显微镜观察复合材料及其偶件磨损表面形貌.结果表明:半干法制备的环氧树脂体积分数为40%的CF/EP复合材料的摩擦系数稳定;纯CF/EP复合材料主要表现为粘着磨损特性;MoS2与石墨改性后复合材料摩擦磨损性能明显改善,质量比为1.5∶1的MoS2与石墨改性CF/EP复合材料具有最佳的摩擦磨损性能,其稳态摩擦系数为0.14～0.15,磨损量3.15×10-5 mg/r.     

不同材料弹体超声速侵彻钢筋混凝土靶的结构破坏对比实验

设计了超声速钻地结构弹,采用203 mm口径的火炮,开展了25 kg量级弹体在1100~1300 m/s速度范围内侵彻钢筋混凝土靶的实验研究,应用数值仿真对弹体侵彻钢筋混凝土靶的过程进行了模拟计算。基于实验和仿真结果,对超声速侵彻条件下两种金属材料弹体的结构响应、质量损失等问题进行了分析。结果表明:在超声速侵彻钢筋混凝土靶的过程中,两种金属材料的弹体结构变形破坏形式主要为头部侵蚀和侧壁磨蚀,头部侵蚀量的大小与弹体壳体材料有关,高强度G50钢材料更适合用于1200 m/s速度量级的超声速侵彻环境。对出现的“径缩”现象作了初步分析,并对今后工程应用的结构弹体设计提出了指导意见。     

微织构超声振动铣削系统的研究

为了在金属切削过程中在7075铝合金表面形成稳定的微织构以提高其服役性能,提出一种微织构超声铣削加工工艺。为此,该文首先基于运动合成原理获得了刀尖的运动轨迹特征和工件表面的织构形貌特征。然后,基于等效电路原理和传输矩阵法建立了超声铣削系统的频率方程,并应用牛顿迭代法获得了准确的数值解,通过有限元软件对建立的超声振动系统分别进行模态分析和谐响应分析,获得了具有微织构特征的纵扭复合超声铣削系统。最后,对加工制造出的微织构纵扭复合超声铣削系统进行振动测试、切削力测试和加工测试,结果表明:工件表面形成的"鱼鳞网纹"微观织构能够改变其润湿性能。     

Measurement and analysis of excitation functions for alpha-induced reactions in copper

Excitation functions for the production of⁶⁸Ga,⁶⁷Ga,⁶⁶Ga,⁶⁵Ga +⁶⁵Zn and⁶¹Cu fromα-induced reactions in natural copper have been measured in the energy range ≈ 10–40 MeV using the stacked foil technique. A stack of nine copper foils was irradiated by a 40 MeVα-beam. Theγ-rays emitted from the irradiated samples were recorded. Excitation functions have also been calculated theoretically using a statistical model with and without the inclusion of pre-equilibrium emission of particles. Pre-equilibrium component simulated by exciton model shows that the inclusion of pre-equilibrium emission gives better agreement between experimental and theoretical excitation functions. Pre-equilibrium fraction depends on the incident energy and the target mass number.     

Evolution of Classical and Quantum States in the Groupoid Picture of Quantum Mechanics

The evolution of states of the composition of classical and quantum systems in the groupoid formalism for physical theories introduced recently is discussed. It is shown that the notion of a classical system, in the sense of Birkhoff and von Neumann, is equivalent, in the case of systems with a countable number of outputs, to a totally disconnected groupoid with Abelian von Neumann algebra. The impossibility of evolving a separable state of a composite system made up of a classical and a quantum one into an entangled state by means of a unitary evolution is proven in accordance with Raggio’s theorem, which is extended to include a new family of separable states corresponding to the composition of a system with a totally disconnected space of outcomes and a quantum one.     

An Improved Composite Multiscale Fuzzy Entropy for Feature Extraction of MI-EEG

Motor Imagery Electroencephalography (MI-EEG) has shown good prospects in neurorehabilitation, and the entropy-based nonlinear dynamic methods have been successfully applied to feature extraction of MI-EEG. Especially based on Multiscale Fuzzy Entropy (MFE), the fuzzy entropies of the τ coarse-grained sequences in τ scale are calculated and averaged to develop the Composite MFE (CMFE) with more feature information. However, the coarse-grained process fails to match the nonstationary characteristic of MI-EEG by a mean filtering algorithm. In this paper, CMFE is improved by assigning the different weight factors to the different sample points in the coarse-grained process, i.e., using the weighted mean filters instead of the original mean filters, which is conductive to signal filtering and feature extraction, and the resulting personalized Weighted CMFE (WCMFE) is more suitable to represent the nonstationary MI-EEG for different subjects. All the WCMFEs of multi-channel MI-EEG are fused in serial to construct the feature vector, which is evaluated by a back-propagation neural network. Based on a public dataset, extensive experiments are conducted, yielding a relatively higher classification accuracy by WCMFE, and the statistical significance is examined by two-sample t-test. The results suggest that WCMFE is superior to the other entropy-based and traditional feature extraction methods.     

Sb2O3的丰度对（1-x）La0.6Dy0.1Sr0.3MnO3/（x/2）（Sb2O3）电输运性质的影响

用固相反应法制备(1-x)La0.6Dy0.1Sr0.3MnO3/x/2(Sb2O3)(x=0.00,0.02,0.15)样品,通过X射线衍射(XRD)图谱,扫描电子显微镜(SEM)照片及SEM能谱(EDS),ρ～T曲线研究样品的结构及电输运性质.结果表明:Sb离子没有进入Mn位,Sb2O3包覆在La0.6Dy0.1Sr0.3MnO3颗粒表面,Sb2O3起助熔剂作用,使得复合样品的颗粒变大且大小相对均匀;复合样品的绝缘体-金属转变温度TP较纯的La0.6Dy0.1Sr0.3MnO3的TP提高20K左右,对x=0.15的样品电阻高峰值比纯的La0.6Dy0.1Sr0.3MnO3的峰值电阻率增大两个数量级,用自旋极化隧穿理论予以解释.