Laser ranging based on electro-optic switch

Based on electro-optic switch effect in crystal, a novel laser ranging method is proposed. CW-laser emitted by laser transmitter propagates forward to the measured target, after being reflected by the target, and then goes back to the transmitter. Close to the transmitter, a special mono-block LiNbO₃ crystal is added into the round-trip light beams. High-voltage pulses with the sharp enough changes in rising edges are loaded on the crystal. Based on electro-optic effect, double refraction and internal double reflection effect in crystal, the crystal cuts off the round-trip light beams, and reflects a light pulse cut out by the crystal to a detector aside from the original beam path. The pulse width T is the period that laser propagates forward and back between the crystal and the target. The feasibility of the new idea is proved by our experiments and a brand-new way for the laser ranging is provided.     

一种新型非晶态分子材料的非线性光学折射率和吸收特性

用单光束扫描法测量了在532nm处一种新型非晶态分子材料5,5′Bis(dimesitylboryl)2,2′bithiophene的非线性折射率和吸收系数样品非线性透射特性的分析表明,在靠近线性吸收区的532nm处有饱和吸收存在由三能级饱和模型和Zscan法确定了饱和强度、非线性折射率的实部和虚部研究结果表明:这种新型非晶态分子材料具有非常好的光子学应用前景.     

Processes limiting the rate of response in photorefractive composites

The processes limiting the rate of response of highly diffractive, reorientationally enhanced photorefractive polymer composite materials are identified from a series of degenerate four wave mixing and Mach–Zehnder interferometric measurements. In the regime of low intensity writing beams charge generation limits the rate of holographic grating formation, but at higher intensities charge transport or reorientation of dye molecules can restrict the rate of grating formation more strongly. A grating risetime of 540 ms is observed in a composite of high dye content with high reorientational mobility of the dye molecules. In this case it is proposed that the charge carrier mobility of the doped poly(N-vinylcarbazole):2,4,7-trinitro-9-fluorenone (PVK:TNF) matrix is the principal limiting factor in grating response rates.     

基于步进电机非线性折射率测控系统设计

提出了一个基于步进电机非线性折射率测控系统.整个系统以AT89C51单片机为核心,设计了步进电机驱动电路,光电探测电路和A/D转换电路实现对非线性折射率的测量.用VC++6.0编写了上位机软件,实现单片机与上位机通信,对测量数据的分析、处理以及对整个测控系统的控制.     

利用集总L-C元件构造的一维metamaterials特性的实验研究

在普通微带传输线中周期性地加载集总L C元件能够构造一维特异性材料(metamaterials)，它具有与众不同的特异性质.通过实验证实了波在这种结构中传播具有相速度与群速度方向相反的左手性通带，其折射率为负值，并发现平均折射率为零的能隙.这种结构具有结构紧凑，参数可调，制作简单的优点. 关键词： 负折射率 特异性材料 周期性结构 微带线     

共振光的大折射率

揭示了在多能级原子介质中的一种新现象:利用原子相干可使共振光获得明显大于1的折射率.     

红外介质波导的参数测量

建立在模方程近似解的基础上,考虑LiNbO₃材料的色散特性,提出了一种用可见激光测量红外介质波导主要参数的方法,给出了实验测量结果,并对结果进行了分析讨论,本文提出的方法方便而且可靠,特别是较好地解决了单模波导的参数测量问题,具有较大的实用意义。     

Application of multiple-beam white-light fringes for measuring the refraction and dispersion of mica

Multiple-beam white-light interference fringes are applied to measure the two refractive indices of a mica sample and their dispersion across the visible spectrum. In addition, the mica birefringence and its dispersion are measured. A mica sample of dimensions 2 × 5 mm² and an immersion liquid of nearly the same refractive index are used. Only a single shot interferogram is needed to measure all the aforementioned parameters. Cauchy's and a modified single-term Sellmeier dispersion formula are used for fitting the experimental data and extracting the parameters required.     

掠入射法测定液体折射率实验中的光路分析

文章通过掠入射法测定液体折射率实验中的光路分析，以确定最佳的实验方法，使得观察视场中的阴暗分界线最为清楚，便于寻找，提高测量精度。     

一种新型左手材料的设计和特性研究

通过对左手材料的理论分析,设计了一种宽频带左手材料结构单元.该结构单元由一个矩形闭合环和十字型结构构成的谐振器和金属线组合而成.这种新结构中的谐振器实现负磁导率,金属线实现负介电常量,经过合理的设计,可以在某一频段内使得磁导率和介电常量同时为负,即具有负的有效折射率和正的波阻抗.数值仿真结果表明:在其工作频段内存在一个通带并且在17.6～29.0 GHz频率范围内折射率实部为负,而虚部接近于零;同时在该频率范围内波阻抗实部大于零,从而说明了该左手材料具有左手特性.除此之外,相对左手带宽达到48.9％,远远优于传统的左手材料.