A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.     

A Novel Synthesis of Two-dimensional Nanopatterned TiO2 Thin Film

Recently the research on structures with an ordered two-dimensional(2D) pattern has attracted great attention due to its versatile applications in the fields of microelectronic and optoelectronic devices, displays, biochips and sensors, enzymatic immobilization, drug carriers, and photonic band gap materials. Various well-arrayed 2D structures have been made by the modern technique such as laser writing pattern fabrication, photoetching technique, micro-electromechanical systems based on scann…     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

Direct analysis of thin-layer chromatographic spots of narcotics by means of diffuse reflectance Fourier transform infrared spectroscopy

The technique of diffuse reflectance Fourier transform infrared spectrometry (DRIFT) as an in situ detection method was used for the qualitative and quantitative analysis of drugs (heroin, cocaine and codeine) separated by thin layer chromatography.It was found that at a given interferometer throughput and detector sensitivity the quality of the spectrum depends strongly in the type of the chromatographic thin layer used. A detection limit of approx. 2 g was attained on a microcrystalline cellulose thin layer with a dynamically aligned Bio-Rad Digilab FTS 60A/896 type interferometer and room temperature DTGS detector. A reliable qualitative analysis can be made with as little as 10 to 15 g drug per spot.     

掺杂8-羟基喹啉铝薄膜的电致发光特性研究

在具有电致发光(EL)的有机整合染料8-羟基喹啉铝(Alq3)中接以染料罗丹明6G(R6G),用真空热蒸发的方法制备器件,获得了峰值波长575nm的黄色直流薄膜电致发光,从而通过掺杂改变了发光颜色.并在Alq3发光层不同区域插入一掺杂薄层(Alq3:R6G),利用其发光波长与未掺杂部分(Alq3)的不同,以此作为“探测层”,通过对器件光谱及电学特性的测量与分析,探讨了有关发光区域,发光机理,界面对发光影响等基本问题.     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS I.POLY(P-PHENYLENE TEREPHTHALATE)

The morphology and crystal structure of poly(p-phenylene terephthalate) (PPT), prepared by confined thin film melt (CTFMP) and solution (CTFSP) and bulk solution polymerization, were characterized by transmission electron microscopy, electron diffraction and molecular modeling. The unit cell is monoclinic (P21/a space group) with parameters a =7.89, b = 5.49, c =12.65 A α= γ= 90°,β= 100.33°, density = 1.48 g/cm3, the a, b andβ values differing slightly from those reported previously in the literature. A degree of variation in relative intensities of hk0 reflections in, apparently, untilted [001] ED patterns was observed from a given sample, suggesting some variation in molecular packing. ED evidence was found for a second phase, with [001] appearing the same as for phase Ⅱ of the related poly(p-oxybenzoate) (PpOBA)polymer. CTFMP crystals polymerized above 220°C (up to 370°C) and CTFSP crystals polymerized at 300°C consisted of lamellae 100-200 A thick.