Semiclassical study of collision-induced predissociation: Comparison of the Landau-Zener model with the method of analytic continuation

Semiclassical calculations are carried out by two methods for the problem of collision-induced predissociation of electronically excited I₂. The first method is that of surface-hopping with the Landau-Zener model. The second method is similar to surface-hopping, except that analytic continuation of the adiabatic potential energy surfaces replaces the Landau-Zener model. Results of the calculations by the two methods compare favorably with each other and with experiment. The possible advantages of the second method are discussed.Camille and Henry Dreyfus Teacher-Scholar, Alfred P. Sloan Research Fellow.     

The identification of nitrated polycyclic aromatic hydrocarbons in diesel particulate extracts and their potential formation as artifacts during particulate collection

Summary The highly complex matrix of diesel particulate extracts was analyzed for nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using fused-silica capillary-column gas chromatography along with a thermionic nitrogen-phosphorus detector (TID) and high-performance liquid chromatography followed by on-line catalytic reduction of the nitro-PAH to amino-PAH and subsequent fluorescence detection. Positive isomer identification and quantitation of nitro-PAH are from retention times of authentic standards and their mass spectra. The ease of nitro-PAH formation by nitration of PAH raises the question regarding the origin of these species, whether they are produced as “native” products during the engine combustion process and/or in the exhaust, or instead, formed as the result of chemical conversion to produce artifacts during the sampling procedure. This problem is assessed examing 1-nitropyrene-concentration in particulates of three light-duty diesel engines for different sampling times. 1-Nitropyrene concentrations show only a moderate increase with sampling time under average sampling conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

The molecular and crystal structures of two diastereomeric 3,4-dihydropyrromethenones

The molecular and crystal structures of the two racemic diastereomeric 3,4-dihydropyrromethenone derivatives1 and2 of configurations (Z) and (E) were determined at 93 K (1, 2) and at room temperature (1). From an analysis of the crystallographically observed temperature coefficients a pseudorotation flexibility of the pyrrolidinone ring in the crystal is deduced. In both compounds a nearly orthogonal arrangement between the two heterocyclic ring systems is observed, which is ascribed to the steric bulk of the substituents in positions 1 and 3 of the pyrrolidinone ring.Herrn Prof.Josef Schurz zum 60. Geburtstag gewidmet.     

停留—催化反应速差动力学法同时测定Fe,Mo

根据Ｆｅ（Ⅲ）、Ｍｏ（Ⅵ）对Ｈ２Ｏ２氧化邻氨基酚的催化反应速率不同，结合流动注射停留技术，建立了同时测定Ｆｅ（Ⅲ）、Ｍｏ（Ⅵ）的速差动力学分光光度法．测定铁和钼的线性范围分别为０．１～２．５μｇ／ｍＬ和０．５～１５μｇ／ｍＬ．除Ｗ（Ⅵ）的允许量较小外，其它离子不干扰测定．用本法测定了合成样液中铁和钼含量，结果满意．     

Viscosity of mixtures of polymers and microemulsions — the Huggins interaction coefficient

Microemulsions used in enhanced oil recovery are usually used in conjunction with a polymer solution that provides mobility control by reducing the permeability of the formation and/or increasing the viscosity of the injected fluid. Microemulsions, which are mixtures of at least four components — water, oil, surfactant and cosurfactant (and, usually, inorganic salts) are complex even in the absence of polymer and consequently, studies of their phenomenon tend to be phenomenological. An approach found to be useful to circumvent this has been to consider the microemulsion particles dispersed in their external phase to be macromolecules which retain their integrity when diluted with external phase or when mixed with polymers. Thus the dispersed phase components are treated as a pseudocomponent. If this approach is followed, many features of the phase diagram of polymer-microemulsion mixtures can be rationalized. It is therefore of some interest to determine whether a similar approach can be used to understand or predict the viscosity of mixtures in which a simple mixing rule for viscosities can be utilized to gain further insight into the polymer-microemulsion interaction.     

Optical Properties of Model Compounds of Polyaniline

The UV and visible spectra of six model compounds were studied. These compounds can be considered as models of polyaniline in the reduced, cation radical, partially oxidized and oxidized forms. After treatment of a mixture of equal molar quantities of the reduced form (DPPD) and the oxidized form (QDIM) with acid, the following reaction was observed: DPPD(I)+QDIM(III)+2H⁺=2DPPD⁺(II) After similar treatment of the partially oxidized form (V) with acid, the radical cation salt formed. The UV and visible spectra of polyaniline in the reduced form, oxidized form and conductive form are similar to the spectra of DPPD, QDIM and DPPD⁺ or radical cation salt of V respectively. We propose that the polyaniline synthesized by chemical oxidation of aniline consists of oxidized and reduced repeat units. Upon protonation a redox reaction (or electron rearrangement) occurs and forms delocalized radical cations (polarons) in the polymer chain which are highly conductive.     

Enantioselectivity of 6-O-alkyldimethylsilyl-2,3-di-O-methyl-β-cyclodextrins as chiral stationary phases in capillary GC

Summary Clenbuterol has been determined in urine by solidphase extraction on a C₁₈ cartridge, diazotization of the eluate with nitrite, coupling of the diazonium ion with 1-(naphthyl)ethylenediamine, and separation of the azo dye formed by HPLC with a C₁₈ column and a micellar mobile phase containing 0.1 M sodium dodecyl sulphate, 12%n-butanol and 0.05 M citrate buffer, pH 3. Recoveries higher than 90% were obtained by mixing the samples with a 20% 0.2 M NaOH before extraction. Limits of detection of 51 and 6.7 ng L⁻¹ were obtained with spectrophotometric and thermal lens spectrometric detection, respectively; respective repeatabilities were 3.1% (5 μg mL⁻¹) and 5.6% (0.16 μg mL⁻¹).     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.     

HPLC of antibiotics. 1. Streptolydigin and related compounds

Two new acyltetramic acids related to streptolydigin have been isolated from fermentations of Streptomyces lydicus. The principal members of this complex were resolved by TLC on silica gel. However, the methods of detection, permanganate spray or bioautography, were not suitable for both crude fermentation broths and purified extracts. Gas chromatography is unsuitable for the detection of either underivatized or silylated streptolydigins. High performance liquid chromatography (HPLC) particularly on triethylaminoethyl cellulose is rapid and sensitive and is the method of choice for the analysis of both crude and purified samples. Using high performance liquid chromatography, two components were detected in the complex, which are not observed using any of the other chromatographic procedures.     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.