Simultaneous Determination of Gallic Acid and Folic Acid in Fruit Juice Samples Using Square Wave Voltammetry at Electrochemically Pretreated Carbon Paste Electrode

An efficient sensor was developed for the simultaneous determination of gallic and folic acid in juice samples using an electrochemically pretreated carbon paste electrode. The electrode was characterized by CV and EIS. The electrochemical behavior of GA and FA was evaluated by CV and SWV. The electrode exhibited high electrocatalytic activity towards GA and FA due to high surface area. Under the optimized condition, linear plots in the ranges of 0.08–13 μM and 0.1 to 15 μM were obtained for GA and FA, respectively. The proposed method was successful for the simultaneous determination of GA and FA in juice samples with satisfactory recovery.     

Analytical Performance of Clay Paste Electrode and Graphene Paste Electrode-Comparative Study

The analytical performance of the clay paste electrode and graphene paste electrode was compared using square wave voltammetry (SWV) and cyclic voltammetry (CV). The comparison was made on the basis of a paracetamol (PA) determination on both working electrodes. The influence of pH and SWV parameters was investigated. The linear concentration ranges were found to be 6.0 × 10⁻⁷–3.0 × 10⁻⁵ and 2.0 × 10⁻⁶–8.0 × 10⁻⁵ mol L⁻¹ for clay paste electrode (ClPE) and graphene paste electrode (GrPE), respectively. The detection and quantification limits were calculated as 1.4 × 10⁻⁷ and 4.7 ×10⁻⁷ mol L⁻¹ for ClPE and 3.7 × 10⁻⁷ and 1.2 × 10⁻⁶ mol L⁻¹ for GrPE, respectively. Developed methods were successfully applied to pharmaceutical formulations analyses. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to characterize ClPE and GrPE surfaces. Clay composition was examined with wavelength dispersive X-ray (WDXRF).     

Electrochemical Detection of Lead Ion Based on a Peptide Modified Electrode

A novel biosensor harnessing a peptide layer which has specific affinity to lead ion proved to be highly effective for electrochemical analysis of lead ions. The peptide modified electrode was used for the electrochemical analysis of various trace metal ions by square wave voltammetry. Compared to the other ions investigated, the peptide modified electrode was found to be highly selective to Pb²⁺ in the range of 50–700 nM. Furthermore, the biosensor exhibited a high reusability and good spike recovery in the tap water containing various concentration of Pb²⁺.     

Travelling‐wave ion mobility mass spectrometry and negative ion fragmentation of hybrid and complex N‐glycans

Nitrogen collisional cross sections (CCSs) of hybrid and complex glycans released from the glycoproteins IgG, gp120 (from human immunodeficiency virus), ovalbumin, α1‐acid glycoprotein and thyroglobulin were measured with a travelling‐wave ion mobility mass spectrometer using dextran as the calibrant. The utility of this instrument for isomer separation was also investigated. Some isomers, such as Man₃GlcNAc₃ from chicken ovalbumin and Man₃GlcNAc₃Fuc₁ from thyroglobulin could be partially resolved and identified by their negative ion fragmentation spectra obtained by collision‐induced decomposition (CID). Several other larger glycans, however, although existing as isomers, produced only asymmetric rather than separated arrival time distributions (ATDs). Nevertheless, in these cases, isomers could often be detected by plotting extracted fragment ATDs of diagnostic fragment ions from the negative ion CID spectra obtained in the transfer cell of the Waters Synapt mass spectrometer. Coincidence in the drift times of all fragment ions with an asymmetric ATD profile in this work, and in the related earlier paper on high‐mannose glycans, usually suggested that separations were because of conformers or anomers, whereas symmetrical ATDs of fragments showing differences in drift times indicated isomer separation. Although some significant differences in CCSs were found for the smaller isomeric glycans, the differences found for the larger compounds were usually too small to be analytically useful. Possible correlations between CCSs and structural types were also investigated, and it was found that complex glycans tended to have slightly smaller CCSs than high‐mannose glycans of comparable molecular weight. In addition, biantennary glycans containing a core fucose and/or a bisecting GlcNAc residue fell on different mobility‐m/z trend lines to those glycans not so substituted with both of these substituents contributing to larger CCSs. Copyright © 2016 John Wiley & Sons, Ltd.     

Autonomous conveyer gel driven by frontal polymerization

Autonomous mechanical mass transportation for cargos on the microscale with no need of continuous external powering is of great scientific and technological interest due to their extensive applications. However, it is still challenging to create a self‐driven system applicable to diverse micromaterial transportation demands. In this work, we developed a novel autonomous conveyer gel driven by frontal polymerization (FP). The chemical wave produced in FP was stable, and self‐propagating with a constant velocity, which can be easily monitored by thermal imaging or fluorescence labeling. We investigated the influence of the initiation temperature, swelling ratio of the gel substrate, and the size of the cargos on the motion of driven behavior. Results showed that the driving velocity can be well controlled by altering the initiation temperatures of FP. The swelling ratio and the size of the cargos had a key impact on the feasibility of self‐driven behavior. In addition, powerful driven capability by FP was demonstrated by successfully transporting cargos in series, and further applied for targeted synthesis of CdS nanocrystals. The methodology developed here provides an effective way to convert chemical energy to mechanical work, and may be useful in energy conversion and utilization, mass transportation and other applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1323‐1331     

汞—钯试剂络合物极谱吸附波的研究

在极谱催化波和吸附波方面,国内进行了大量的研究,但汞的络合物吸附波至今未见报道。钯试剂已用于光度法测定钯等。我们在研究该试剂与金属离子络合的极谱行为时发现,在硼砂介质中,试剂与Hg~(2+)可形成电活性络合物并可用于汞的测定。     

线性变位极谱法研究 ⅩⅥ.铀(Ⅵ)-5-Br-PADAP-磺基水杨酸的配位吸附波

本文提出了铀(Ⅵ)-5-Br-PADAP-磺基水杨酸三元配合物的极谱配位吸附波。在pH为7.5-8.2的醋酸、三乙醇胺、乙醇底液中,该波的峰电位在-0.6855V(vs.SCE)。在1.00×10^-7-1.00×10^-5mol·dm^-3范围内,铀(Ⅵ)浓度与峰电流呈线性关系。对极谱波的电流、电位性质进行了研究,测定了配合物的组成、表观稳定常数和离解及生成速率常数。     

MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.     

钍-铬天青S的极谱吸附波

在0.12moL/L乙酸铵-0.05%磺基水杨酸-0.15%乙醇,pH5.8～6.0的条件下,钍与铬天青S在-0.45W(vs SCE)有一良好的导数极谱波。钍浓度在0～0.4μg/mL范围内与波高呈直线关系。