Two-dimensional magneto-thermoelastic interactions in a micropolar functionally graded solid

Abstract

The present work is concerned with the 2D deformation in a nonhomogeneous, isotropic, micropolar, magneto-thermoelastic medium in the context of Lord-Shulman theory as a result of an inclined load. The inclined load is supposed to be a linear combination of normal load and tangential load. Material properties are assumed to be graded in x-direction. Normal mode technique is proposed to obtain the analytical expressions for the temperature field, displacement components, and stresses. These are also calculated numerically and depicted graphically to observe the variations of the considered physical variables.

Communicated by Seonho Cho.     

Combining Complex and Radial Slave Boson Fields within the Kotliar–Ruckenstein Representation of Correlated Impurities

The gauge symmetry group of any slave boson representation allows to gauge away the phase of bosonic fields. One benefit of this radial field formulation is the elimination of spurious Bose condensations when saddle-point approximation is performed. Within the Kotliar–Ruckenstein representation, three of the four bosonic fields can be radial while the last one has to remain complex. In this work, the procedure to carry out the functional integration involving constrained fermionic fields, complex bosonic fields, and radial bosonic fields is presented. The correctness of the representation is verified by exactly evaluating the partition function and the Green's function of the Hubbard model in the atomic limit.     

Paraxial propagation of cosh-Airy vortex beams in chiral medium

Propagation dynamics of the cosh-Airy vortex(CAiV) beams in a chiral medium is investigated analytically with Huygens–Fresnel diffraction integral formula. The results show that the CAiV beams are split into the left circularly polarized vortex(LCPV) beams and the right circularly polarized vortex(RCPV) beams with different propagation trajectories in the chiral medium. We mainly investigate the effect of the cosh parameter on the propagation process of the CAiV beams.The propagation characteristics, including intensity distribution, propagation trajectory, peak intensity, main lobe's intensity, Poynting vector, and angular momentum are discussed in detail. We find that the cosh parameter affects the intensity distribution of the CAiV beams but not its propagation trajectory. As the cosh parameter increases, the distribution areas of the LCPV and RCPV beams become wider, and the side lobe's intensity and peak intensity become larger. Besides, the main lobe's intensity of the LCPV and RCPV beams increase with the increase of the cosh parameter at a farther propagation distance, which is confirmed by the variation trend of the Poynting vector. It is significant that we can vary the cosh parameter to control the intensity distribution, main lobe's intensity, and peak intensity of the CAiV beams without changing the propagation trajectory. Our results may provide some support for applications of the CAiV beams in optical micromanipulation.     

压电式微滴按需喷射的过程控制和规律

微滴喷射增材制造技术中沉积微滴的大小与均匀性是影响成型件质量的关键因素.本文设计了一种用于生成均匀微滴的压电驱动式微滴喷射装置,通过压电材料带动柔性膜片振动,将液体从喷嘴中喷出生成微滴,采用数值模拟和实验相结合的方法,研究了不同控制参数下膜片振幅及其对生成微滴尺寸和均匀性的影响.研究结果表明:膜片振幅大小受到驱动电压和压电频率的共同影响,压电频率是导致膜片中心点振幅实验测量值小于理论计算值的主要原因,膜片振动会导致喷嘴内部压力发生变化从而影响微滴生成尺寸.在相同驱动电压条件下,压电频率为10 Hz时存在压电膜片振幅最大值.随着膜片振幅的增大,喷孔处液体速度和液柱长度增大到临界值时可以生成微滴,当喷孔处的液柱长度超过临界值时,会形成卫星液滴. 当膜片振幅区间在30 $\mu$m$\sim $42 $\mu $m可以稳定生成微滴,生成最小微滴尺寸为339.8$\mu$m,直径最大变化率为0.29%,相邻两微滴间距最大变化率为2.67%,生成微滴的尺寸及均匀性较好.研究结果有助于提高压电式微滴喷射装置的液滴生成质量.      

含非完整界面的功能梯度压电材料Ⅲ型裂纹问题

本文研究了含非完整界面的功能梯度压电复合材料的Ⅲ型裂纹问题．此裂纹垂直于非完整界面,采用弹簧型力电耦合界面模型模拟非完整界面．界面两侧材料的性质,如弹性模量、压电常数和介电常数均假定呈指数函数形式且沿着裂纹方向变化．运用积分变换法将裂纹面条件转换为奇异积分方程,并使用Gauss-Chebyshev方法对其进行数值求解．根据算例结果讨论了一些退化问题并分析了裂纹尖端强度因子与材料的非均匀系数和非完整界面参数的关系．     

Effect of rotation in magneto-thermoelastic transversely isotropic hollow cylinder with three-phase-lag model

This article deals with the various heat source responses in a transversely isotropic hollow cylinder under the purview of three-phase-lag (TPL) generalized thermoelasticity theory. In presence of magnetic field and due to the rotating behavior of the cylinder, the governing equations are redefined for generalized thermoelasticity with thermal time delay. In order to obtain the stress, displacement and temperature field, the field functions are expressed in terms of modified Bessel functions in Laplace transformed domain. When the outer radius of hollow cylinder tends to infinity, the corresponding results are discussed. Finally an appropriate Laplace transform inversion technique is adopted.     

空间机器人捕获航天器后基于无源性理论的鲁棒镇定控制

研究了漂浮基空间机器人捕获非合作航天器过程对系统产生的冲击效应及其后联合体系统镇定运动的控制问题。为此,利用拉格朗日方法及牛顿-欧拉法分别获得了捕获前空间机器人及目标航天器的动力学模型;结合动量守恒定律、系统运动几何关系及力的传递规律,分析了捕获过程相互碰撞所产生的冲击效应,建立了捕获完成后两者联合体的系统动力学模型。在此基础上,针对同时存在不确定参数及外部扰动的联合体系统,设计了基于无源性理论的镇定运动神经网络H_∞鲁棒控制算法。本文提出的基于无源性理论设计的鲁棒控制算法具有良好的动态特性及较强的鲁棒性,可快速完成系统的镇定控制,实现轨迹的精确跟踪。系统数值模拟仿真验证了本文控制方案的正确性。     

随机介质背散射二维Mueller矩阵的数值模拟与分析

推导了随机介质背散射Mueller矩阵的直接计算公式,并运用矢量Monte Carlo方法进行了数值模拟.结果表明随机介质背散射二维Mueller矩阵方位关系随散射系数的减小而增强,而与微粒大小关系不大;Mueller矩阵元素绝对值的空间分布随径向呈近似指数规律衰减,矩阵元素的方位变化具有周期性.对称系统的二维Mueller矩阵的花样图中仅有7幅独立,其余9幅可通过对称、旋转变换得到.     

氨基安替比林分子原位烙印柱的制备及其水中结合性质的研究

实验采用原位聚合法以甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,偶氮二异丁扉(AIBN)为引发剂,正十二醇和甲苯为致孔剂直接在液相色谱柱中制备了氨基安替比林分子烙印柱．讨论了模板分子及其类似物在有机相和水相中的色谱行为及作用机理．实验表明,在水相中烙印柱具有很强的保留性能,氨基安替比林的保留因子可达到94．41．结果认为离子作用和疏水作用是使得氨基安替比林及类似物具有很强的保留性的重要原因,为研究模板聚合物的结合特性,采用前流分析法分别测定了氨基安替比林、氨基比林和安替比林在烙印柱上的吸附等温线．实验表明,分子烙印聚合物对烙印分子表现了较高的选择性,这和通过比较各物质在分子烙印柱和空白柱上保留因子所获得的结果一致．     

油脂降解培养基优化的遗传算法实验研究

我们运用遗传算法,首次对利用热带假丝酵母降解油脂的培养基优化问题进行了研究。通过5代实验完成了50个实验样本、6种培养基成分、64个浓度水平的优化任务。按照优化后的培养基组成,热带假丝酵母降解油脂的降解率为95．4％,比正交设计法提高了7．63％。实验结果表明：利用遗传算法可优化培养基成分含量,取得更好的效果;遗传算法是一种优于单因素试验法和正交设计法的新型、高效的培养基优化方法。