InN量子点的液滴外延及物性表征

由于1. 55μm波段广泛应用于通信领域,为了探索不同生长温度对InN量子点的形貌影响,并且实现自组装InN量子点在1. 55μm通信波段的发光,对InN量子点的液滴外延及物性进行了相关研究。首先利用射频等离子体辅助分子束外延(PA-MBE)技术在GaN模板上,采用液滴外延方法在3种温度下生长了InN量子点结构。生长过程中靠反射高能电子衍射(RHEED)对样品进行原位监控。原子力显微镜(AFM)表征结果表明随着生长温度升高,量子点尺寸变大,密度减小。在生长温度350℃和400℃下,观测到了量子点;当温度高于450℃时,未观测到InN量子点。当生长温度为400℃时,量子点形貌最好,密度为6×10~8/cm~2,对400℃下生长的InN量子点进行了变温PL测试,成功得到InN量子点在1. 55μm波段附近的光致发光,并且随着测试温度的升高,量子点的发光峰位发生了先红移后蓝移最后又红移的S型曲线变化,这种量子点有望在未来应用于量子通信领域。     

超高碰撞能23.84 kJ/mol下反应F+D2→DF+D的交叉分子束研究

本文搭建了一套新的实验设备,首次将氢原子里德堡态标记的飞行时间谱技术与激光爆破束源技术相结合,进行超高碰撞能下化学反应的动力学研究. 初步进行了F+D₂→DF+D在超高碰撞能23.84 kJ/mol下的实验研究. 在研究中应用了两种类型束源：一类是通过激光爆破过程产生的高能F原子束源,另一类是通过液氮冷却脉冲阀而产生的D₂束源. 实验中探测了反应产物振动态分辨的微分散射截面. 结果显示,大部分反应产物DF主要呈现侧向和后向散射分布,而产物DF(v''=4)则主要分布在前向. 对前向散射产物DF(v''=4)的动力学来源进行了讨论.     

微波电子回旋共振等离子体阴极电子束的实验研究

介绍了实验室研制的微波电子回旋共振(ECR)等离子体阴极电子束系统及初步研究结果，该系统包括微波ECR 等离子体源、电子束引出极、聚焦线圈等。通过测量水冷靶电流和靶上的束斑尺寸，实验研究了微波ECR 等离子体阴极电子束的流强、聚束性能等随电子束系统工作条件的变化。结果表明：微波输入功率越高、引出电压越高，引出电子束流强越大；工作气压对电子束流强的影响较复杂，随气压增加呈现出先降低后升高的特点；在7×10⁻⁴Pa 的极低气压下电子束流强可达75mA，引出电压9kV；能量利用率可达0.6；调整聚焦线圈的驱动电流，电子束的束斑直径从20mm 减小到13mm，电子束流强未有明显变化。     

RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

A High‐Efficiency All‐Fiber Laser Operated in High‐Order Mode using Ring‐Core Yb‐Doped Fiber

An all‐fiber laser generating a cylindrical vector beam is proposed and demonstrated using a home‐made ring‐core Yb‐doped fiber (RC‐YDF). In the RC‐YDF, not only annular doping but also ring‐type beam pump is realized. This is believed to be the first report describing the realization of annular doping and ring‐type beam pump in active fiber simultaneously, which can enhance the efficiency for high‐order mode oscillation. This laser operates in the high‐order mode stably with a slope efficiency of as high as 55.7%. Cylindrical vector modes can be obtained easily through adjusting the polarization controller. This work may have great potential for providing high‐efficiency and high‐power cylindrical vector beam and vortex beam sources.     

Self‐focusing of a cosh‐Gaussian laser beam in magnetized plasma under relativistic‐ponderomotive regime

The combined effect of relativistic and ponderomotive nonlinearities on the self‐focusing of an intense cosh‐Gaussian laser beam (CGLB) in magnetized plasma have been investigated. Higher‐order paraxial‐ray approximation has been used to set up the self‐focusing equations, where higher‐order terms in the expansion of the dielectric function and the eikonal are taken into account. The effects of various lasers and plasma parameters viz. laser intensity (a₀), decentred parameter (b), and magnetic field (ω_c) on the self‐focusing of CGLB have been explored. The results are compared with the Gaussian profile of laser beams and relativistic nonlinearity. Self‐focusing can be enhanced by optimizing and selecting the appropriate laser‐plasma parameters. It is observed that the focusing of CGLB is fast in a nonparaxial region in comparison with that of a Gaussian laser beam and in a paraxial region in magnetized plasma. In addition, strong self‐focusing of CGLB is observed at higher values of a₀, b, and ω_c. Numerical results show that CGLB can produce ultrahigh laser irradiance over distances much greater than the Rayleigh length, which can be used for various applications.     

Two crucial factors influencing quality of GaAs on Ge substrate

High-quality GaAs films with fine surfaces and GaAs/Ge interfaces on Ge have been achieved via molecular beam epitaxy. The influence of low temperature annealing and low temperature epitaxy on the quality of the film when GaAs is grown on a （100） 6 ° offcut towards [111] Ge substrate are investigated by analyzing and comparing the GaAs films that are fabricated via three different processes. A low temperature annealing process after high temperature annealing and a low temperature epitaxy process after the initial GaAs growth play a vital role in improving the quality of GaAs film on a Ge substrate.     

Scintillation of partially coherent Gaussian–Schell model beam propagation in slant atmospheric turbulence considering inner- and outer-scale effects

Based on the modified Rytov theory and the international telecommunication union-radio （ITU-R） slant atmospheric structure constant model, the uniform scintillation index of partially coherent Gaussian-Schell model （GSM） beam propa- gation in the slant path is derived from weak- to strong-turbulence regions considering inner- and outer-scale effects. The effects of wavelength of beams and inner- and outer-scale of turbulence on scintillation are analyzed numerically. Compar- ison between the scintillation of GSM beams under the von Karman spectrum and that of beams under the modified Hill spectrum is made. The results obtained show that the scintillation index obtained under the von Karman spectrum is smaller than that under the modified Hill spectrum. This study can find theory bases for the experiments of the partially coherent GSM beam propagation through atmospheric turbulence.     

Relation between Airy beams and triple-cusp beams

Airy beams and triple-cusp beams are two kinds of accelerating beams. The propagation characteristics and internal topological structures of accelerating Airy beams are well understood because of the developed mathematical theory about Airy function. However, limited information is available about the optical characteristics of accelerating triple-cusp beams. In this work, the relationship between Airy beams and triple-cusp beams is examined theoretically and experimentally. Results reveal some important optical characteristics of triple-cusp beams based on the optical characteristics of Airy beams. These findings are expected to provide a foundation for future applications of triple-cusp beams.     

Designing of a polarization beam splitter for the wavelength of 1310 nm on dual-core photonic crystal fiber with high birefringence and double-zero dispersion

We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.