Study on CYCIAE-100 radiation field and residual radioactivity

The accelerators should be properly designed to make the radiation field produced by beam loss satisfy the dose limits. The radiation field for high intensity H- cyclotron includes prompt radiation and residual radiation field. The induced radioactivity in accelerator components is the dominant source of occupational radiation exposure if the accelerator is well shielded. The source of radiation is the beam loss when cyclotron is operating. In this paper, the radiation field for CYCIAE-100 is calculated using Monte Carlo method and the radioactive contamination near stripping foil is studied. A method to reduce the dose equivalent rate of maintenance staff is also given.     

双棱镜干涉实验难点解析

总结了双棱镜干涉实验的调整难点及原因。提出解决的措施并对要点进行研究分析,收到良好效果。提出评价学生调整光路质量的方法。     

397 GHz斜注管互作用系统的设计模拟

斜注管是返波振荡器的一种,通过电子注的倾斜,电子距离慢波结构更近,高频场更强,耦合阻抗和互作用效率更高,显著增加输出功率。对带状注斜注管的互作用系统进行了设计,并首次将双排齿慢波结构应用于斜注管。利用电磁模拟软件和3D粒子模拟软件对设计的斜注管的色散曲线和场分布进行了分析,并对其注-波互作用进行了模拟,可以得到大于100 mW的输出功率以及50 GHz的调谐带宽。输出功率在370.5 GHz频点处处达到峰值2.3 W,电子注电压7.0 kV,注电流120 mA,聚焦磁场1.0 T。     

电子辐照下聚合物介质深层充电现象研究

空间辐射环境中,聚合物介质的深层充放电效应是威胁航天器安全的重要因素之一.文中在Chudleigh和von Berlepsch所发展的电位衰减模型基础上引入传输电流项,考虑了电子入射引起的感应电导率和感应电场的影响,提出了新的分析研究介质材料深层充电规律和特征的模型.通过该模型,分析了不同辐射条件下介质的表面电位、内部电荷与电场分布的变化,并设计实验及援引其他实验数据对模型分析结果进行验证.分析和实验结果表明,聚合物介质在深层充电过程中的平衡电位随着入射电子束流强度和介质电阻率的增加而增大,决定深层充电平 关键词： 深层充电 电荷传输模型 电子束 聚合物     

Design of Hamming Code Checker Using Titanium-Diffused Lithium Niobate-Based Waveguide

ABSTRACT

This work presents an electro-optic effect-based design for the widely used Hamming code for checking single bit errors in the received data. The structure is based on Mach-Zehnder Interferometer, designed using Titanium-diffused Lithium Niobate-based waveguides. The proposed device has been successfully tested using the beam propagation method. For a received 7-bit code, the three simultaneously generated check bits are combined to check the error position. Critical performance parameters like extinction ratio (24.39dB), contrast ratio (25.711dB), insertion loss (0.041dB), and amplitude modulation (0.079dB) calculated for the overall device are within acceptable limits for the feasibility of the device.     

Low-energy electron beam source

Experimental results of research into a ferroelectric-plasma-source-assisted hollow anode (HA) discharge as a source of low-energy electron beams are presented. To generate electron beams, the HA auto-bias negative voltage was achieved by the discharge current flowing through the resistor connecting the HA and the grounded electrode. It is shown that this method allows reliable and reproducible generation of low-energy electron beams with electron energy of several hundreds of eV, electron current density up to several A/cm² and pulse duration of several tens of microseconds.     

Evaluation of carbon stripper foils produced by a nitrogen ion beam sputtering method

Carbon stripper foils having thicknesses in the range of 5–40 μg/cm² have been prepared by a nitrogen ion beam sputtering method and their lifetimes have been tested in the Van de Graaff accelerator facility with 3.2 MeV, Ne⁺ ions. The foils of 21 μg/cm² thickness had the longest mean lifetime of 1350.0 mC/cm² (irradiation dose of 8.4×10¹⁸ atoms/cm²) which was 50 times longer than that of commercial foils. However, foils with other thicknesses had extremely short lifetimes similar to commercial foils. The nitrogen content of the foils of both long and short lifetimes has been determined using elastic scattering of 3 MeV α-particles.     

Monte Carlo simulation of ion–material interactions in nuclear fusion devices

One of the key aspects regarding the technological development of nuclear fusion reactors is the understanding of the interaction between high-energy ions coming from the confined plasma and the materials that the plasma-facing components are made of. Among the multiple issues important to plasma–wall interactions in fusion devices, physical erosion and composition changes induced by energetic particle bombardment are considered critical due to possible material flaking, changes to surface roughness, impurity transport and the alteration of physicochemical properties of the near surface region due to phenomena such as redeposition or implantation. A Monte Carlo code named MATILDA (Modeling of Atomic Transport in Layered Dynamic Arrays) has been developed over the years to study phenomena related to ion beam bombardment such as erosion rate, composition changes, interphase mixing and material redeposition, which are relevant issues to plasma-aided manufacturing of microelectronics, components on object exposed to intense solar wind, fusion reactor technology and other important industrial fields. In the present work, the code is applied to study three cases of plasma material interactions relevant to fusion devices in order to highlight the code’s capabilities: (1) the Be redeposition process on the ITER divertor, (2) physical erosion enhancement in castellated surfaces and (3) damage to multilayer mirrors used on EUV diagnostics in fusion devices due to particle bombardment.     

基于平行玻璃板的半导体激光器阵列光束整形

为得到质量均衡的大功率激光束,分别以条形和面阵半导体激光器为模型,基于平行玻璃板对光束的偏移作用,对准直后激光束进行分割和重排,并在Zemax软件中进行了仿真。条形半导体激光器初始发散角为40和10,整形前已准直光束快慢轴方向的光参数积分别为0.455 2 mmmrad和20.484 mmmrad,光束质量相差较大,整形后快慢轴方向光参数积分别为2.731 2 mmmrad和3.414 0 mmmrad,实现了快慢轴方向光束质量均衡。利用平行玻璃板消除面阵半导体激光器中存在的发光死区,整形后快慢轴方向光参数积分别为7.002 mmmrad和10.242 mmmrad ,整形系统耦合效率为90.13%。     

19.5nm极紫外反射镜的研制

介绍了一种用于太阳观测19.5nm极紫外多层膜的研究工作。利用软件对规整的Mo/Si膜系结构进行了优化,拓宽了反射带宽,提高了积分反射率。采用双离子束溅射技术,时间控厚,成功制备了该反射镜。通过同步辐射反射率计测试表明,峰值反射率27.5%,均匀性在1%以内,已初步达到预设要求。