Electron beam forming system for irradiation of large diameter cylindrical products

The report describes electron beam electromagnetic forming system, which is destined for irradiation of cylindrical long goods, specifically for PE tubes 160 mm diameter. System consists of electromagnet, power supply units, beam distributions control units, etc. for use at an electron accelerator at 5 MeV and 50 kW. The particular geometry of the magnet poles and their mutual arrangement are creating an irradiation field that allows the electrons to irradiate the surface of the product close to 90°.     

A concise synthesis of (2S,4R)- and (2S,4S)-4-methylglutamic acid

A concise, multi-gram scale method for producing the bioactive and enantiomerically pure epimers, (2S,4R)- and (2S,4S)-glutamic acids, in a single synthetic scheme is described.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Decomposition of halogenated hydrocarbons using intense, penetrating bremsstrahlung

Radiolytic decomposition of chlorinated hydrocarbons and other toxic compounds has been experimentally measured using ionizing radiation produced by electron accelerator and nuclear isotope sources. Decomposition products have been identified. A portable, commercially available electron accelerator was set up at a Superfund site where vapor extraction wells were removing trichloroethylene (TCE) from a spill into the unsaturated soil. The extraction vapor was passed through the accelerator beam to decompose the TCE. On site radiolytic decomposition of TCE vapor using an accelerator is shown to be significantly less expensive than filtration of TCE vapor using activated charcoal.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

甲烷在Ni表面及La薄膜上激活解离化学吸附

利用分子束技术改变甲烷的平动能E_k来研究E_k及其法向分量E_n对甲烷在Ni表面及La薄膜上激活解离吸附的影响。对CH_4/Ni及CH_4/La系统, 当甲烷的平动能E_k分别低于58.5 kJ·mol~(-1)及52.3 kJ·mol~(-1)时, 没观察到甲烷的解离吸附。当甲烷的平动能超过此阈值时, 即对CH_4/Ni系统, 当Ek=58.5增至63.8 kJ·mol~(-1)时, 初始沾着几率s_0由0至0.54线性增加; 对CH_4/La系统, 当E_k=52.3增至63.8 kJ·mol~(-1)时, S_0由0至0.49线性增加。这些结果表明, 两个系统的化学吸附是不经过前趋态的直接化学吸附。最后求出CH_4/Ni, CH_4/La系统的表观活化能分别为46.8 kJ·mol~(-1)和38.1 kJ·mol~(-1)。     

Electron beam irradiated textile cellulose fibres.: ESR studies and derivatisation with glycidyl methacrylate (GMA)

Powdered samples of cotton, flax and viscose from textile fibres were subjected to electron beam irradiation (20-400 KGy). ESR signals were observed after irradiation. The intensity of the signals depended on the administered dose and exhibited an exponential decay with time. The ESR spectra, whose pattern depended drastically on the crystallinity of the samples, indicated the simultaneous presence of at least three carbon-centred radical species. When the whole irradiated textile fibres were quenched in a solution of glycidyl methacrylate (GMA) a significant increase of the weight was observed, the increase being strongly dependent on the administered dose and on the time interval elapsed between irradiation and quenching. Spectroscopic characterisation evidenced that GMA acted as cellulose radicals scavenger on the unsubstituted carbon of the double bond and was covalently linked to the fibre through a new C-C bond while maintaining unaltered the ester and the epoxide groups, available for further derivatisations. Because irradiation of the whole textile fibres in the range 20-200 KGy does not result in significant degradation of the material, GMA quenching of fibres irradiated in this dose range may represent an attractive route to their functionalisation.     

Pheromone, 3.Mitt.: Eine einfache Methode zur Steuerung der Reduktion von α-Alkoxy-carbonylverbindungen

Summary Enantiomerically pure 1,2-diols bearing optionallysyn oranti configurated secondary hydroxylic groups are synthesized from acetal-protected cyanohydrins. After resolution of the diastereomers the cyanohydrins are converted into -alkoxy-ketones by Grignard-reaction followed by reduction using common chelating or non-chelating agents. Among others syntheses of enantiomerically pure pheromones,endo-Brevicomin,exo-Brevicomin and Dispalure are given as examples.

Prof. Dr. Hans Berbalk zum 70. Geburtstag gewidmet     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.