直流放电制备CN自由基及其LIF探测

CN自由基是研究化学反应动力学的典型自由基，CN的动力学行为，如CN＋O2的反应已成为研究自由基－自由基反应的模型体系[1]，同时也在许多实际过程如燃烧过程，星际气体的形成过程中起着重要的作用[2，3]．利用含有CN的化合物进行光解、放电、与亚稳态原子分子进行传能反应是目     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Mass spectrometric diagnosis of the surface nitriding mechanism in a d.c. glow discharge

Reactive constituents have been investigated in a molecular beam generated in the cathode surface glow area and surface boundary layer. Mixtures of nitrogen and hydrogen form NH_x(x=0–4) compounds, which are of relevance in heterogeneous, plasma vs. metal nitriding reactions. Ammonia decomposition leads to NH_x(x=2–4). Strong cataphoretic enrichment of hydrogen has been observed in the cathode glow area. Heterogeneous reactions of NH_x with iron lead to the formation of iron nitrides via intermediates such as FeNH_2–3. In a pulsed d.c. glow discharge, increased sputtering and decreased hydrogen enrichment have been observed.     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.     

An efficient and general method for resolving cyclopropene carboxylic acids

A general method is described for the resolution of cycloprop-2-ene carboxylic acids via diastereomeric N-acyloxazolidines prepared from enantiomerically pure oxazolidinones. Although a number of oxazolidinones were shown to resolve cyclopropene carboxylic acids, the oxazolidinones of S-phenylalaninol, S-phenylglycine and (1S,2R)-cis-1-amino-2-indanol are optimal in terms of resolving power and cost effectiveness. Separations were performed using simple flash chromatography, and because there is typically a large difference in R_f values it is possible to separate gram quantities of pure diastereomers in a single chromatogram. The cycloprop-2-ene carboxylic acids that can be resolved include those that are substituted at the 1-position by H, Ph, α-naphthyl, CO₂Me, CH₂OMOM, and trans-styryl; alkene substituents include Me, n-alkyl, Ph and tethered alkynes. Remarkably, 2-methyl-3-propylcycloprop-2-ene carboxylic acid can also be resolved with ease. The relative configurations of four diastereomerically pure oxazolidines were determined by X-ray crystallography. Reduction of the N-acyloxazolidinones with LiBH₄ give enantiomerically pure derivatives of 3-hydroxymethylcyclopropene that react with either MeMgCl or vinylMgCl and catalytic CuI to give enantiomerically pure products of syn-addition.     

Optimal life strategies in organisms exposed to recurrent critical events

The optimal partition of energy between survival and reproduction is considered for a population subject to recurrent and potentially lethal critical events. The best strategy is found by maximizing fitness, a functional derived from the Lotka equation. The dynamics is governed by a second-order, age-varying, nonlinear system. The energy storage and the probability of survival are the state variables, while the amounts of energy placed into and withdrawn from the storage are the controls. The optimal life strategy is shown to be as follows: build up the storage at the very beginning of life, and then progressively deplete it to resist the critical events.This work was partially supported by MURST Project Ricerche sui Fondamenti della Conservazione della Natura. The authors would like to thank C. Ricci for suggesting the problem and C. Matessi for helpful discussion.     

Analysis and simulation on the performance of a gyro-penitron amplifier

A cylindrical waveguide gyro-peniotron amplifier is analysed theoretically in this paper. By a ballistic method and directly using the energy conservation in the beam-wave system, a set of interaction equations for the cylindrical waveguide gyro-peniotron amplifier is derived. Computer simulation shows that under defined conditions an interaction efficiency of 47%, an output power of 240kW at a gain of 22. 5 dB and a 3 dB-instantaneous bandwidth of 1. 9% for a central frequency of 35GHz, TE₀₃ mode gyro-peniotron amplifier could be achieved. The influence of the operation parameters on the amplifier performance is also presented.     

Polymeric flocculants processing by accelerated electron beams and microwave heating

Results obtained by accelerated electron beam, microwave and simultaneous microwave and electron beam application in the chemistry of acrylamide and acrylic acid copolymers (polymeric flocculants used for wastewater treatment) are presented. Comparative results concerning the molecular weight and Huggins’ constant for the acrylamide and acrylic acid copolymers obtained by classical heating, microwave heating, electron beam irradiation and simultaneous microwave and electron beam treatment are reported. Microwave heating produces high water solubility of the polymeric flocculants but median molecular weight values. Electron beam irradiation gives high molecular weight values but associated with a cross-linked structure (poor water solubility) while microwave energy addition to electron beam energy gives simultaneously high molecular weight values and high water solubility.     

Electron beam crosslinking of non-lead PVC formulations

PVC samples with lead-free and lead-base stabilizer, containing TMPTMA (trimethylolpropane trimethacrylate) as a crosslinker and DOP (2-ethylhexyl phthalate) as a plasticizer, were electron beam treated at different doses (2–200 kGy) and characterized to evaluate crosslinking and other several properties, as a continuation of our previously reported paper, where these PVC formulations, typical for wire and cable applications, underwent gamma irradiation. The PVC was formulated with two different stabilizing systems: Ca/Zn and dibasic lead phthalate for comparison, to use them as jackets for a 22 wire gage (AWG). Small samples of the jacketed wires were irradiated in an industrial Dynamitron electron accelerator for the corresponding doses, along with two dosimetric systems: radiochromic thin film and alanine pellets dosimeters. The maximum dose applied was decided as the crosslinking increased, until the gel content was stable. The dose of 200 kGy was the condition for the highest crosslinking, so most of the wire was irradiated at such dose. Chemical and mechanical evaluations were carried out to the irradiated wire. The results show that 200 kGy was too high dose for the materials, since an important degradation is observed for the Ca/Zn systems. Unfortunately, such dose affects basically to CaZn formulations, which showed much poorer performance than classical lead-containing compositions. The results also indicate that gel content is not the best way of deciding the optimum condition for irradiation.     

Reactions of Laser Ablation-magnesium Plasma with Methanol Clusters

IntroductionReactions of metal ions with neutral molecules orclusters produce a variety of metal complex ions andother new series of cluster ions including cations andanions.The laser ablation-molecular beam(LA-MB)method has marked its relevance in the st…