Smoke triggered corona discharge sensor

This paper presents an ionic smoke sensor working without a radioactive ionization source. The presence of smoke particles reduces significantly the effective corona discharge threshold of air by a factor greater than 5. The smoke sensor consists of a wire under an intermediate continuous voltage which generates a current only in presence of smoke. The sensor electric consumption is therefore very low and can operate for a long time. Results of a prototype operating under 600 V with a 25-μm-diameter wire are shown.     

Electron temperature and ion density measurements in a glow discharge of an Ar–N2 mixture

A DC glow discharge produced in N₂ gas can generate several species that are important in different applications, such as the modification of surface properties of materials. A low-pressure glow discharge apparatus was used for the the analysis of the Ar–N₂ mixture at a total pressure of 2.0 Torr, a power of 20 W and 40 l/min flow rate of gases. The emission bands were measured in the wavelength range of 200–1100 nm. The principal elements are N₂, N ₂⁺ and Ar I. The electron temperature was found in the range of 1.72–2.08 eV, and the ion density was in the order of 10¹⁰ cm^?3.     

Radiation hardness of gas discharge tubes and avalanche diodes used for transient voltage suppression

The widespread use of gas discharge tubes (GDTs) and avalanche diodes for transient voltage suppression (TVS) in many cases results in their exposure to ionizing radiation. The aim of this paper is to investigate the influence of irradiation on these TVS devices’ characteristics, by exposing them to a combined neutron/gamma radiation field. Experimental results show that irradiation of TVS diodes causes a lasting degradation of their protective characteristics. On the other hand, GDTs exhibit a temporary change of performance. The observed effects are presented with the accompanying theoretical interpretations, based on the interaction of radiation with materials constituting the investigated devices.     

Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering

Ferritic steel with compositions 83.0Fe–13.5Cr–2.0Al–0.5Ti (alloy A), 79.0Fe–17.5Cr–2.0Al–0.5Ti (alloy B), 75.0Fe–21.5Cr–2.0Al–0.5Ti (alloy C) and 71.0Fe–25.5Cr–2.0Al–0.5Ti (alloy D) (all in wt%) each with a 1.0?wt% nano-Y₂O₃ dispersion were synthesized by mechanical alloying and consolidated by pulse plasma sintering at 600, 800 and 1000°C using a 75-MPa uniaxial pressure applied for 5?min and a 70-kA pulse current at 3?Hz pulse frequency. X-ray diffraction, scanning and transmission electron microscopy and energy disperse spectroscopy techniques have been used to characterize the microstructural and phase evolution of all the alloys at different stages of mechano-chemical synthesis and consolidation. Mechanical properties in terms of hardness, compressive strength, yield strength and Young's modulus were determined using a micro/nano-indenter and universal testing machine. All ferritic alloys recorded very high levels of compressive strength (850–2850?MPa), yield strength (500–1556?MPa), Young's modulus (175–250?GPa) and nanoindentation hardness (9.5–15.5?GPa), with up to 1–1.5 times greater strength than other oxide dispersion-strengthened ferritic steels (<1200?MPa). These extraordinary levels of mechanical properties can be attributed to the typical microstructure of uniform dispersion of 10–20-nm Y₂Ti₂O₇ or Y₂O₃ particles in a high-alloy ferritic matrix.     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

A comparison of algainas and InGaAsP-based 1.3 μm semiconductor lasers using high pressure

Abstract

We have compared the effect of hydrostatic pressure on the threshold current, I_th, and lasing energy, E_lase, of 1.3 pm quantum-well devices based upon AlGaInAs and InGaAsP. Whilst we observe a very similar dependence of E_lase on pressure for the two materials, we measure strikingly different variations of I_th. By applying pressure to 1.3 μm InGaAsP lasers, I_th typically decreases by ～ 10% over 1 GPa consistent with the reduction of Auger recombination, which forms ～ 50% of I_th at room temperature. However, for the 1.3 μm AlGaInAs-based lasers, we observe an increase in I_th by ～ 8% over the same pressure range. From these results we conclude that non-radiative recombination accounts for only ～ 20% of I_th in AlGaInAs-based devices. This is in good agreement with previous temperature dependence measurements and shows why AlGaInAs-based devices exhibit a reduced temperature sensitivity of I_th which is very important for telecommunications applications.     

基于流函数模型的矢量海流生成方法

提出了一种基于海洋流函数模型的双站高频地波雷达径向流生成矢量流算法.该算法避免了传统矢量合成法将径向流进行插值带来的误差,而且符合海洋动力学原理,生成的流场更接近实际分布.通过计算机仿真发现,流函数算法的容错、容差能力比矢量合成法更强.在径向流探测标准误差为10 cm.s-1时,新算法反演结果的均方根误差减小了约5 cm.s-1.应用到雷达实测数据中,与海流计实测结果比较表明,新算法比传统算法的平均误差减小了2 cm.s-1.     

Enhanced Terahertz Phonon Polariton in Lithium Niobate Chip

Terahertz (THz) phonon polaritons, fundamental quasi-particles that couple lattice vibrations with electromagnetic fields at THz frequencies, are found in a variety of materials that offer the potential for a wide range of THz optoelectronic devices and on-chip integrated systems. However, these compact devices and on-chip systems are hampered by the absence of on-chip powerful THz phonon polariton sources. In this study, the efficient generation and amplification of THz phonon polaritons are proposed and directly visualized on a lithium niobate (LN) chip via a tilted pulsefront phase matching technique. By combining lateral pumping and phase matching schemes, two orders of magnitude are successfully attained in the interaction distance between the pump light and the LN chip, accompanied by a substantial amplification of generated THz phonon polariton. The results of this study may lead to abundant potential applications in chip scale THz photonic devices and systems based on LN materials and its integrated heterostructures.