基于PCI总线的矩阵电路在压变温压补偿系统中的实现与应用

本文提出基于PCI总线驱动控制的矩阵电路在压力变送器温压补偿系统中应用的目的是解决现有压力变送器温压补偿系统中HART总线型工位电路数量少,整套矩阵电路缺失冗余性,以及现有电路在压力变送器产品温压补偿中实用性差、维护成本高的问题。文中阐述的矩阵电路是以PCI总线为基础,实现对PIO数字接口卡的驱动控制,完成由PCI总线上32路数字I/O到168路数字I/O的转换,并利用168路数字I/O进行继电器矩阵电路设计,实现了弱电控制强电的过程,成功有效的解决了现存压力变送器温压补偿系统中矩阵电路存在的问题。该研发成果已经应用于PDS压力变送器产品温压补偿生产线上,并且该电路的设计能够满足压力变送器生产企业的需求,而且整套电路融入系统中能够长期稳定、可靠的运行。     

预制层溅射气压对CIGS薄膜结构及器件的影响

研究了金属预制层制备过程中溅射气压对Cu(In_1-xGa_x)Se₂(CIGS)薄膜及电池器件性能的影响.通过调节溅射气压改变预制层的结晶状态及疏松度与粗糙度,在合适的预制层结构下,活性硒化热处理过程中,可使Ga有效地掺入到薄膜中形成优质的CIGS固溶体.高溅射气压会使预制层过于致密,呈现非晶态趋势.经活性硒化热处理后,CIGS薄膜容易产生CIS与CGS"两相分离"现象,从而导致CIGS薄膜太阳电池的开路电压和填充因子降低,电池转换效率由10.03%降低到5.02%.     

Picomole‐level Formaldehyde Determination in Gaseous and Beer Samples Using Flow Injection Chemiluminescence Analysis

Based on the linear enhancement of formaldehyde (FA) within 7.0 ～ 1000 pmol l^?1 on luminol—bovine serum albumin (BSA) chemiluminescence (CL) system, FA determination in air and beer samples using CL with flow injection (FI) was proposed. The detection limit was 2.5 pmol l^?1 (3σ) and the relative standard deviations were less than 4.5% (n = 7). At a flow rate of 2.0 mL min^?1, a whole analysis from sampling to washing only needed 32 s, offering a sample throughput of 112 h^?1. This proposed method was successfully utilized to determine FA vapor pressure in liquid (121.8 ± 3.8 Pa), FA content in real air sample (8.93 ± 0.03 mg m^?3), and FA levels in beer (199.5 ± 5.6 ～ 225.2 ± 3.5 mg l^?1), giving determination recoveries from 90.7% to 109.3%. The mechanism of BSA—FA interaction was also investigated, showing FA binding to BSA was a spontaneous process mainly through hydrogen bonding and van der Waals force by FI‐CL, with binding constant K of 1.89 × 10⁶ l mol^?1 and the number of binding sites n of 0.86. Molecular docking analysis further revealed FA could enter into the pocket at subdomain IIA of BSA, with K of 1.71 × 10⁵ l mol^?1 and ΔG of ‐29.68 kJ mol^?1.     

Effect of mono-, di- and tri-ethanolammonium tetrafluoroborate protonic ionic liquids on the volatility of water, ethanol, and methanol

Vapor pressure data were measured for nine binary systems containing water, ethanol, or methanol with one of three protonic ionic liquids (PILs), viz. mono-, di- and tri-ethanolammonium tetrafluoroborate ([HMEA][BF₄], [HDEA][BF₄], and [HTEA][BF₄]), at varying temperatures and PIL-contents using a quasi-static ebulliometer. The vapor pressure data were correlated by NRTL model with an overall average absolute relative deviation (AARD) of 0.0175. It is showed that the effect of PILs on the vapor pressure lowering of solvents follows the order of [HMEA][BF₄] > [HDEA][BF₄] > [HTEA][BF₄], and the vapor pressure lowering degree follows the order of water > methanol > ethanol. Besides, the activity coefficients of solvent for binary system {solvent + PIL} at fixed PIL mole fraction of 0.10 were calculated using the regressed NRTL parameters. The results indicate that three PILs can give rise to a negative deviation from the Raoult's law for water and methanol and a positive deviation for ethanol to a varying degree, leading to the variation of relative volatility of a solvent.     

分子氧无溶剂催化氧化法合成对叔丁基苯甲酸

在常压、无溶剂条件下,以氧气为氧化剂,醋酸钴为催化剂,研究了催化氧化对叔丁基甲苯(PTBT)合成对叔丁基苯甲酸(PTBA)的反应.考察了催化剂与PTBT质量比、促进剂类型、促进剂用量、氧气流速、反应温度、反应时间等因素对反应的影响,确定了优化的反应条件.在PTBT用量30mL、催化剂用量0.7g、乙醛促进剂用量0.3m...     

4GPa超高压凝固Mg-6Zn-3Y合金的凝固组织及相分析

利用X射线衍射仪、扫描电镜并配合能谱分析研究了Mg-6Zn-3Y合金4 GPa超高压凝固组织.结果表明:在4 GPa超高压条件下凝固时,实验合金的凝固组织得到显著细化,基体α-Mg相的晶格间距有所减小;Zn在基体α-Mg中溶解度大幅提高,Y不溶于基体α-Mg;实验合金凝固组织中出现呈对称性的四瓣或六瓣花的初晶Y固溶体,该初晶花瓣形貌完整、尺寸较大,显示其充分自由生长;先发生的共晶反应的共晶组织为成“簇”分布的共晶团,共晶相呈点状或棒状;后发生的共晶反应的组织为离异共晶.超高压凝固显著地改变了实验合金的凝固过程.     

Practical method transfer from high performance liquid chromatography to ultra-high performance liquid chromatography: the importance of frictional heating

In theory, with identical stationary phase chemistry, the transfer of an HPLC method to UHPLC conditions is straightforward and necessitates the calculation of new conditions based on column and instrument geometries. Occasionally, undesirable changes in selectivity, retention or efficiency have been reported and have been attributed to a frictional heating phenomenon that is due to the elevated generated pressure drop. In the present study, the frictional heating in a UHPLC system was evaluated experimentally under gradient elution conditions (acetonitrile/buffer at pH 3 and 9) with generated pressure drops in the range of 100-1000 bar on both 1.0mm and 2.1mm I.D. columns using a mixture of 10 representative basic, acidic and neutral pharmaceutical compounds. Under adiabatic conditions (i.e., still-air oven), the longitudinal temperature gradient was estimated at +4 °C, +8 °C and +16 °C at 300, 600 and 1000 bar, respectively, on a 2.1mm I.D. column using an empirical measurement procedure. With the 1.0mm I.D. column, these values were reduced to +3 °C, +6 °C and +12 °C, respectively. Finally, various approaches to eliminate or at least to reduce the effect of frictional heating are briefly discussed.     

介质阻挡放电中OH自由基对甲醛脱除的影响

对管线式介质阻挡放电中的甲醛脱除进行了实验研究, 测量了介质阻挡放电产生的OH (A²Σ→X ²Π, 0-0)自由基发射光谱. 研究了在一个大气压下不同放电峰值电压、放电频率、添加氩气和氧气时甲醛脱除率与OH自由基发射光谱强度的变化关系. 实验结果表明: 在氮气含甲醛体系中, 提高放电峰值电压、放电频率和增大氩气含量时, 甲醛脱除率随OH (A²Σ→X ²Π, 0-0)自由基发射光谱强度的增强而提高; 当在氮气含甲醛体系中增大氧气含量时, 甲醛脱除率随OH (A²Σ→X ²Π, 0-0)自由基发射光谱强度的减弱而降低. 在11.5 kV放电峰值电压和9 kHz放电频率下, 氮气含甲醛体系中甲醛脱除率达93.8%.     

电化学振荡反应在中药鉴定中的应用

介绍化学振荡的由来、特点以及化学振荡理论研究、化学振荡在中药鉴定中的应用进展及未来发展趋势.深化研究化学振荡机理可以建立中药新型的准确、快速、方便的质量评价体系,推动中药在国际市场的发展.