Electron Temperatures and Electron Densities in Microwave Helium Discharges with Pressures Higher than 0.1 MPa

We adopted laser Thomson scattering for measuring the electron density and the electron temperature of microwave plasmas produced in helium at the pressures higher than the atmospheric pressure. The electron density decreased while we observed the increase in the electron temperature with the pressure. These are reasonable results by considering the decrease in the reduced electric field, the dominant loss of electrons via three‐body recombination with helium as the third body, and the production of electrons with medium energy via heavy particle collisions at the high gas pressure. The temporal variation of the electron temperature had the rise and the fall time constants of approximately 10 ns. The rapid heating and cooling of the electron temperature are due to the fast energy transfer from electrons to helium because of the high collision frequency in the high‐pressure discharge. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

基于PCI总线的矩阵电路在压变温压补偿系统中的实现与应用

本文提出基于PCI总线驱动控制的矩阵电路在压力变送器温压补偿系统中应用的目的是解决现有压力变送器温压补偿系统中HART总线型工位电路数量少,整套矩阵电路缺失冗余性,以及现有电路在压力变送器产品温压补偿中实用性差、维护成本高的问题。文中阐述的矩阵电路是以PCI总线为基础,实现对PIO数字接口卡的驱动控制,完成由PCI总线上32路数字I/O到168路数字I/O的转换,并利用168路数字I/O进行继电器矩阵电路设计,实现了弱电控制强电的过程,成功有效的解决了现存压力变送器温压补偿系统中矩阵电路存在的问题。该研发成果已经应用于PDS压力变送器产品温压补偿生产线上,并且该电路的设计能够满足压力变送器生产企业的需求,而且整套电路融入系统中能够长期稳定、可靠的运行。     

预制层溅射气压对CIGS薄膜结构及器件的影响

研究了金属预制层制备过程中溅射气压对Cu(In_1-xGa_x)Se₂(CIGS)薄膜及电池器件性能的影响.通过调节溅射气压改变预制层的结晶状态及疏松度与粗糙度,在合适的预制层结构下,活性硒化热处理过程中,可使Ga有效地掺入到薄膜中形成优质的CIGS固溶体.高溅射气压会使预制层过于致密,呈现非晶态趋势.经活性硒化热处理后,CIGS薄膜容易产生CIS与CGS"两相分离"现象,从而导致CIGS薄膜太阳电池的开路电压和填充因子降低,电池转换效率由10.03%降低到5.02%.     

近50年来中国东、西部地面太阳辐射变化及其与大气环境变化的关系

利用1961-2011年中国东、西部地区地面太阳辐射和长期气象数据观测资料, 综合分析了东、西部地区地面太阳总辐射的变化特征, 并结合云量、日照百分率、风速、相对湿度等分析了影响东、西部地面太阳总辐射的变化原因. 结果表明: 近50年来东、西部地区地面太阳总辐射整体呈下降趋势, 下降幅度有所不同; 20世纪90年代之前大部分地区地面太阳总辐射呈下降趋势, 之后呈缓慢增加; 东西部各地区地面太阳总辐射与日照时数间存在显著相关性; 分析影响地面太阳总辐射减少的因素, 东部地区地面太阳总辐射与日照百分率呈显著正相关, 日照百分率是影响地面太阳总辐射减少的主要因素, 总云量与低云量已不是东部地区影响太阳辐射的主要因素; 西部地区地面太阳辐射与云量相关性较低, 主要受大气污染和日照百分率的影响. 风速成为影响地面大气辐射的一个重要因子, 并且风是驱逐大气对流层雾霾等大气污染的主要因子, 这进一步证实了大气污染已经成为影响地面太阳辐射的重要因素, 尤其在中国东部地区.     

Cu对用于高速相变存储器的Sb2Te薄膜的结构及相变的影响研究

采用原位X射线衍射仪、拉曼光谱仪和X射线反射仪分别研究了Cu-Sb₂Te 薄膜的微结构、成键结构和结晶前后的密度变化. Sb₂Te薄膜的结晶温度随着Cu含量的增加而增大. 在10 at.%和14 at.% Cu的Sb₂Te薄膜中, Cu与 Te 成键, 结晶相由六方相的Cu₇Te₄、菱形相的Sb及六方相的Sb₂Te构成. 10 at.% 和14 at.% Cu 的Sb₂Te薄膜在结晶前后的厚度变化分别约为3.2%和 4.0%, 均小于传统的Ge₂Sb₂Te₅ (GST)薄膜. 制备了基于Cu-Sb₂Te薄膜的相变存储单元, 并测试了其器件性能. Cu-Sb₂Te器件均能在10 ns的电脉冲下实现可逆SET-RESET操作. SET和RESET操作电压随着Cu含量的增加而减小. 疲劳测试结果显示, Cu 含量为10 at.%和14 at.%的PCRAM单元的循环操作次数分别达到1.3×10⁴和1.5×10⁵, RESET和SET态的电阻比值约为100. Cu-Sb₂Te可以作为应用于高速相变存储器(PCRAM)的候选材料.     

非线性动力学方法在气候突变检测中的应用

快速、准确的检测气候突变, 对于我们认识气候系统的变化和对未来气候系统演变趋势的预测有着重要的现实意义和社会经济价值. 本文主要回顾了近年来非线性突变检测技术的主要研究进展及其在实际观测资料中的应用, 其中包括基于气候系统长程相关性的检测方法, 如滑动去趋势波动分析方法、滑动移除去趋势波动分析方法、滑动移除重标极差方法和指纹法等; 以及基于时间序列复杂性的检测方法, 如近似熵方法, Fisher信息和小波Fisher信息等. 此外, 本文还指出发展针对空间场的突变检测技术是未来一个可能的发展方向. 由于空间场所包含的气候系统的演变信息远高于单点时间序列, 空间场的突变检测技术将会使得对气候突变的检测时间大大缩短, 从而使得人们有足够的时间去采取行动, 以便为适应气候突变所带来的新挑战做好准备.     

Picomole‐level Formaldehyde Determination in Gaseous and Beer Samples Using Flow Injection Chemiluminescence Analysis

Based on the linear enhancement of formaldehyde (FA) within 7.0 ～ 1000 pmol l^?1 on luminol—bovine serum albumin (BSA) chemiluminescence (CL) system, FA determination in air and beer samples using CL with flow injection (FI) was proposed. The detection limit was 2.5 pmol l^?1 (3σ) and the relative standard deviations were less than 4.5% (n = 7). At a flow rate of 2.0 mL min^?1, a whole analysis from sampling to washing only needed 32 s, offering a sample throughput of 112 h^?1. This proposed method was successfully utilized to determine FA vapor pressure in liquid (121.8 ± 3.8 Pa), FA content in real air sample (8.93 ± 0.03 mg m^?3), and FA levels in beer (199.5 ± 5.6 ～ 225.2 ± 3.5 mg l^?1), giving determination recoveries from 90.7% to 109.3%. The mechanism of BSA—FA interaction was also investigated, showing FA binding to BSA was a spontaneous process mainly through hydrogen bonding and van der Waals force by FI‐CL, with binding constant K of 1.89 × 10⁶ l mol^?1 and the number of binding sites n of 0.86. Molecular docking analysis further revealed FA could enter into the pocket at subdomain IIA of BSA, with K of 1.71 × 10⁵ l mol^?1 and ΔG of ‐29.68 kJ mol^?1.     

Profile monitoring of reflow process using approximations of mixture second‐order polynomials

Lately, profile monitoring has received considerable attention in the statistical process control research field. This paper proposes a novel monitoring framework for the reflow process data, which uses two goodness‐of‐fit criteria to select the change points in the mixture polynomial model. Among change points, the mixture second‐order polynomials are utilized to piecewisely approximate the nonlinear profile data of the reflow process. The well‐known Hotelling T² and proposed EWMA₄ control charts are then employed to monitor the parameter estimates. The experimental results demonstrate that the proposed monitoring framework presents better performances in detecting outlying profiles than the conventional methods in phase I. In phase II, the performance of the proposed framework is assessed in terms of the out‐of‐control average run length. Copyright © 2014 John Wiley & Sons, Ltd.