一例含阴离子水簇的钴配合物的合成、结构及理论研究

金属配合物中的水簇研究为研究宏观意义上的水以及与蛋白质分子有关的水分子提供了有效途径。本文合成了一个含有阴离子水簇的带状超分子配合物[Co(2,2-bipy)₂(N₃)₂](N₃)_0.5Cl_0.5·2H₂O(1,2, 2-bipy=2, 2-联吡啶)。单晶结构解析表明,配合物属于三斜晶系,P-1空间群,晶胞参数为:a=0.822 54(7) nm,b=1.175 58(9) nm,c=1.237 06(10) nm,α=91.379 0(10)°,β=92.151 0(10)°,γ=108.119 0(10)°,V=1.135 27(16) nm³,由一个单核[Co(2,2-bipy)₂(N₃)₂]⁺配合物阳离子、两个非配位水分子、0.5个游离的叠氮离子和0.5个氯离子组成,叠氮离子和氯离子位置无序,占有率各为50%。两个客体水分子通过强烈的分子间氢键作用形成了环状水四聚体,且与无序的N^-₃和Cl^-通过氢键作用形成了一个[(H₂O)₄(N₃)Cl]^2- 阴离子水簇。此外,本文基于密度泛函理论(DFT)对配合物[Co(2,2-bipy)₂(N₃)₂]⁺阳离子进行了量子化学计算,分析了其单点能和原子电荷,并计算了中心金属离子的氧化态,计算结果与实验相吻合。     

Fe掺杂α-Bi2O3光电性质的第一性原理研究

采用第一性原理杂化泛函HSE06方法对Fe掺杂α-Bi2 O3的电子结构和光学性质进行了计算研究.结果表明,Fe掺杂α-Bi2 O3体系有较小的结构变形,本征α-Bi2 O3的禁带宽度为2.69 eV,Fe掺杂使α-Bi2 O3的禁带宽度减小(约为2.34 eV).对其光学性质研究得出Fe掺杂扩展了α-Bi2 O3对可...     

Facile Synthesis of Porous Ag Crystals as SERS Sensor for Detection of Five Methamphetamine Analogs

Porous noble metal nanomaterials have attracted extensive attention due to their high specific surface area and surface plasmon resonance effect. However, it is difficult to form porous structures due to the high mobility and low reduction potential of noble metal precursors. In this article, we developed a facile method for preparing porous Ag with a controllable structure at room temperature. Two kinds of Ag crystals with different porous structures were successfully prepared by using AgCl cubes as sacrificial templates. Through the galvanic replacement reaction of Zn and AgCl, Ag crystals with a sponge-like porous structure were successfully prepared. Additionally, using NaBH₄ as the reducing agent, we prepared granular porous Ag cubes by optimizing the amount of reducing agent. Both the sponge-like and granular porous Ag cubes have clean and accessible surfaces. In addition, we used the prepared two porous Ag cubes as substrate materials for SERS detection of five kinds of methamphetamine analogs. The experimental results show that the enhancement effect of granular porous Ag is better than that of sponge-like porous Ag. Furthermore, we probed the hot spot distribution of granular porous Ag by Raman mapping. By using granular porous Ag as the substrate material, we have achieved trace detection of 5 kinds of methamphetamine analogs including Ephedrine, Amphetamine, N-Methyl-1-(benzofuran-5-yl)propan-2-amine (5-MAPB), N-Methyl-1-(4-methoxyphenyl)propan-2-amine (PMMA) and N-Methyl-1-(4-fluorophenyl)propan-2-amine (4-FMA). Furthermore, to achieve qualitative differentiation of analogs with similar structures we performed density functional theoretical (DFT) calculations on the Raman spectra of the above analogs. The DFT calculations provided the vibrational frequencies, Raman activities, and normal mode assignment for each analog, enabling the qualitative differentiation of the above analogs.     

手性大孔磷酸镓Hit-5的水热合成与晶体结构

本文采用水热合成法制备了一个三维手性大孔开放骨架磷酸镓Ga16P16O75·4[1,6-C6H18N2]·[C2H10N2]·2H2O(简称Hit-5).反应起始原料摩尔配比为:1 GaOOH:15 H3PO4:7.5 H2N(CH2)6NH2:0.5 C2H8N2:555 H2O.Hit-5属正交晶系,P21212空间群,晶胞参数:a=0.8671(1)nm,b=1.7945(1)nm,c=0.9101(1)nm,β=108.33(1)°,V=1.3443(2)nm3,Z=4.Hit-5的骨架是由Ga3P3六聚体和Ga4P4八聚体两个不同的二级结构单元通过共顶点联接构成三维纳米孔结构,在[001]方向呈现16-元环孔道.     

硫缺陷型In2S3光催化剂高效分解水制氢研究

缺陷工程被认为是提高光催化剂分解水制氢性能的关键策略之一,然而有关缺陷诱导半导体材料电子结构演变并增强光生载流子传输机制尚不明确。在本研究中,我们通过简单的一步水热合成法成功构建了富含S缺陷的In2S3半导体光催化剂（VS-In2S3）,在模拟太阳光辐照下其光催化分解水产氢性能相比传统的In2S3（P-In2S3）提升了近一个数量级（达到221.18 μmol/g/h）。此外,利用自主研发的原位X射线光电子能谱（SI-XPS）结合相关密度泛函理论计算证实：S缺陷可诱导强还原性的低价态In（In(3-x)+）暴露,进而增强In位点对H2O的吸附和活化能力,因此,S缺陷型In2S3表现出显著增强的光催化析氢活性。此外,可视化观测到H2O分子在原位光照下脱质子转化为OH的分解水制氢过程。该研究为缺陷型光催化剂设计及光催化分解水反应机制和过程研究提供了一定的见解。     

Orbital-Free Density Functional Theory for Molecular Structure Calculations

We give here an overview of the orbital-free density functional theory that is used for modeling atoms and molecules.We review typical approximations to the kinetic energy,exchange-correlation corrections to the kinetic and Hartree energies, and constructions of the pseudopotentials.We discuss numerical discretizations for the orbital-free methods and include several numerical results for illustrations.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

Structural and Functional Analysis of the Pyridoxal Phosphate Homeostasis Protein YggS from Fusobacterium nucleatum

Pyridoxal 5′-phosphate (PLP) is the active form of vitamin B6, but it is highly reactive and poisonous in its free form. YggS is a PLP-binding protein found in bacteria and humans that mediates PLP homeostasis by delivering PLP to target enzymes or by performing a protective function. Several biochemical and structural studies of YggS have been reported, but the mechanism by which YggS recognizes PLP has not been fully elucidated. Here, we report a functional and structural analysis of YggS from Fusobacterium nucleatum (FnYggS). The PLP molecule could bind to native FnYggS, but no PLP binding was observed for selenomethionine (SeMet)-derivatized FnYggS. The crystal structure of FnYggS showed a type III TIM barrel fold, exhibiting structural homology with several other PLP-dependent enzymes. Although FnYggS exhibited low (<35%) amino acid sequence similarity with previously studied YggS proteins, its overall structure and PLP-binding site were highly conserved. In the PLP-binding site of FnYggS, the sulfate ion was coordinated by the conserved residues Ser201, Gly218, and Thr219, which were positioned to provide the binding moiety for the phosphate group of PLP. The mutagenesis study showed that the conserved Ser201 residue in FnYggS was the key residue for PLP binding. These results will expand the knowledge of the molecular properties and function of the YggS family.     

Regge Models of Proton Diffractive Dissociation Based on Factorisation and Structure Functions

Recent results by the authors on proton diffractive dissociation (single, double and central) in the low-mass resonance region with emphasis on the LHC kinematics are reviewed and updated. Based on the previous ideas that the contribution of the inelastic proton–Pomeron vertex can be described by the proton structure function, the contribution of the inelastic Pomeron–Pomeron vertex appearing in central diffraction is now described by a Pomeron structure function.     

聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.