X光Gabor波带片编码成像技术实验研究

基于星光II实验装置进行了Gabor波带片编码成像探索性实验研究。采用束匀滑光斑三倍频激光打靶,辐照专门设计的ＣＨ埋金属条靶（共两种）,产生了有明确形状、边缘清晰的等离子体。研制了专门的Gabor波带片编码相机,并利用该相机采用单张胶片对不同的靶目标在不同的深度层次上曝光的技术,获得了具有深度层次信息的三维激光等离子体编码像。利用数值重建技术对实验所获得的图像解码,最终获得了在不同深度层次上的激光等离子体信息。     

Field Study on Mobility and Persistence of Linuron and Monolinuron in Agricultural Soil

Abstract

A field site equipped with suction cup lysimeters was installed at Treviglio (BG) to assess the migration capacity of the herbicides linuron and monolinuron from topsoil to groundwater and to verify the appearance of their relevant transformation products in soil and water samples. A constant hydraulic head was applied in order to develop water saturation conditions in the upper layers. KCl was used as a tracer to evaluate water infiltration velocity through the vertical soil profile. The constant hydraulic head accelerated infiltration rates, while herbicide concentrations reached maximum contamination because soil adsorption capacity was underdeveloped. The results indicated two main processes of pesticide transport: firstly transport due mainly to water infiltration through macropores; secondly the transport driven by matrix flow. Linuron was found to be the most mobile herbicide, while chloroanilines were found to be the major transformation products of the herbicides considered.     

毛细管区带电泳分析阿片受体和抗独特型抗羟甲芬太尼抗体

应用毛细管区带电泳（ＣＺＥ）分析测定阿片受体、抗独特型抗羟甲芬太尼抗体等生物大分子样品。熔融石英毛细管柱为６０ｃｍ×１００μｍｉ．ｄ．（从进样到检测器长度为５０ｃｍ）,以硼砂－氢氧化钾为缓冲液。结果表明缓冲液的ｐＨ影响ＣＺＥ对阿片受体的分析,当ｐＨ为９．０时分析效果最理想,重现性良好,测得的两个主峰与同批样品进行ＳＤＳ－ＰＡＧＥ分析得到的两个条带相符。用ＣＺＥ分析抗独特型抗羟甲芬太尼抗体（ＩｇＧ）,表明用ＰｒＯｔｅｉｎＡ－Ｓｅｐｈａｒｏｓｅ亲和色谱分离得到部分纯化的ＩｇＧ,迁移时间不同于对照豚鼠的ＩｇＧ。     

The Effect of an Active Diluent on the Properties of Epoxy Resin and Unidirectional Carbon-Fiber-Reinforced Plastics

The influence of an active diluent on the properties of an epoxy matrix and carbon-fiber-reinforced plastics (CFRP) is investigated. The physicomechanical properties of an ED-20 epoxy resin modified with diglycidyl ether of diethylene glycol (DEG-1), the adhesion strength at the epoxy matrix–steel wire interface, and the mechanical properties of unidirectional CFRP are determined. The concentration of DEG-1 was varied from 0 to 50 wt.%. The properties of the matrix, the interface, and the composites are compared. It is stated that the matrix strength affects the strength of unidirectional CFRP in bending and not their strength in tension, compression, and shear. The latter fact seems somewhat unexpected. The interlaminar fracture toughness of the composites investigated correlates with the ultimate elongation of the binder. A comparison between the concentration dependences of adhesion strength and the strength of CFRP shows that the matrices utilized provide such a high interfacial strength that the strength of CFRP no longer depends on the adhesion of its constituents.     

幂硬化介质中平面应力动态裂纹的尖端弹塑性场

本文采用塑性动力学方程,对幂硬化介质中平面应力动态裂纹尖端场进行了渐近分析,其结果表明:在裂纹尖端附近,应力具有的奇异性,应变具有的奇异性,其中A是一个与塑性区尺寸有关的常数因子,r是离开裂纹尖端的距离,n为硬化指数,文中给出了尖端场的控制参量D,它依赖于马赫数;并且给出了各物理量的角函数。     

激子复合区厚度对有机磁效应的影响

在常规型有机发光二极管的基础上, 通过改变发光层tri-(8-hydroxyquinoline) aluminum (III) (Alq₃)厚度, 研究了激子复合区厚度对有机发光二极管磁效应的影响.测量了器件在不同温度及偏压下电致发光及注入电流在外加磁场作用下的变化, 着重研究了低温下的有机磁电导效应和有机磁电致发光效应.实验发现, 低温(50 K)高磁场 (500 mT)下, 器件表现出随Alq₃厚度的减薄, 磁电导值由正到负再到正的非单调变化.利用磁场调控的超精细相互作用、 磁场抑制的三重态激子-电荷反应以及激子在界面的淬灭效应, 对有机磁电导在低温下表现出的现象进行了定性的解释.实验结果表明, 通过改变激子复合区的厚度, 可以实现对激子浓度的有效调节, 进而实现对有机磁电导和磁电致发光效应的调节. 该研究进一步丰富了有机磁效应的实验现象, 同时提供了一种调控有机磁效应的手段. 关键词： 激子复合区 激子浓度 有机磁电导 有机磁电致发光     

纳米多晶铜中冲击波阵面的分子动力学研究

冲击波阵面反映材料在冲击压缩下的弹塑性变形行为以及屈服强度、应变率条件等宏观量, 还与冲击压缩后的强度变化联系. 本文使用分子动力学方法, 模拟研究了冲击压缩下纳米多晶铜中的动态塑性变形过程, 考察了冲击波阵面和弹塑性机理对晶界存在的依赖, 并与纳米多晶铝的冲击压缩进行了比较. 研究发现: 相比晶界对纳米多晶铝的贡献而言, 纳米多晶铜中晶界对冲击波阵面宽度的影响较小; 并且其塑性变形机理主要以不全位错的发射和传播为主, 很少观察到全位错和形变孪晶的出现. 模拟还发现纳米多晶铜的冲击波阵面宽度随着冲击应力的增加而减小, 并得到了冲击波阵面宽度与冲击应力之间的定量反比关系, 该定量关系与他人纳米多晶铜模拟结果相近, 而与粗晶铜的冲击压缩实验结果相差较大.     

非球面塑料透镜注射型芯工艺探讨

本文来自于作者的实践。介绍了加工方法及测量问题。重点叙述了加工中的一些关键,同时也提供了国内外在这方面的进展情况。     

会聚区的水平偏移特性及其临界频率分析

利用数值模型研究了完整深海声道中会聚区的水平偏移特性,根据折射定律和Lloyd镜效应推导了会聚区发生水平偏移时临界频率的表达式。研究结果表明:当声波频率低于临界频率时,会聚区的主导模态与频率相关,随着声波频率减小会聚区会向靠近声源的方向水平移动,同时传播损失明显增大,当声波频率大于临界频率时,会聚区的主导模态近似与频率无关,会聚区的位置和传播损失大小不会随频率改变而发生明显变化,声源深度不同时,临界频率也不同。通过临界频率可以确定在特定声源深度下,会聚区发生水平偏移时需要满足的频率条件,利用临界频率与声源深度之间的关系,可以被动估计深海浅层目标的深度。     

Design and optimization of a cavitating device for Congo red decolorization: Experimental investigation and CFD simulation

The aim of this work is to perform design and optimization of a cavitating device based on CFD simulation. A set of operational and geometrical parameters such as convergence angle, divergence angle, length of throat, and inlet pressure that can affect the hydrodynamic cavitation phenomenon generating in a Venturi are evaluated through CFD simulation and experimental approaches. Response surface methodology (RSM) was employed to achieve the optimum geometrical configuration. The CFD results show that the maximum cavitation zone in the Venturi can be obtained when half angle of the convergence section, throat length and half angle of the divergence section are 22.7°, 4 mm, and 6.5°, respectively. A maximum decolorization of 38.8% has been obtained using the designed Venturi at cavitation number (Cv) of 0.12. Additionally, the results were compared to that of various orifice plates. A decolorization of 26.2% using 33 holes orifice plate and 11.55% in one hole orifice plate approved the superiority of the designed Venturi.