Stability of model recycled mixed plastic waste compatibilised with a cooperative compatibilisation system

The effect of the degree of degradation of the components of a model municipal plastic waste (a mixture of low-density polyethylene, high-density polyethylene, polypropylene and high-impact polystyrene) on the toughness and stability of recyclates compatibilised with a cooperative compatibilisation system (a mixture of ethylene-propylene statistical and styrene-butadiene block copolymers with a secondary amine-based stabiliser) was studied. It was shown that good impact strength was achieved for recyclates having components with a low or medium degree of degradation. Mechanical properties of recyclates having the components with a high degree of degradation are deteriorated. The addition of the cooperative compatibilisation system leads to a higher thermo-oxidative stability of recyclates irrespective of the degree of degradation of their components. Photo-oxidative stability of the recyclates is low but it can be improved to a satisfactory level by the addition of carbon black or a commercial photo-stabiliser.     

Characterization of the mesostructure of HDPE under “in situ” uniaxial tensile test by incoherent polarized steady‐light transport

This study presents quantitative results related to in situ investigation of the microstructural evolutions of high‐density polyethylene with deformation. These results were obtained thanks to a novel technique (IPSLT) based on the polarized light scattering transport phenomenon. The heterogeneities produced during whitening of the polymer bulk are characterized at the mesoscale level (from hundred of nanometers to a few micrometers). The technique is described as well as the identified parameters it provides, namely: the average size of the scatterers, the anisotropy developed in the medium, and the light transport length, representative of both the volume fraction and size of the heterogeneities. Results obtained during video‐controlled tensile experiments confirm those obtained previously with X‐ray microtomography. They put forward the role of morphological transformations of the amorphous/crystalline phases (especially regarding the creation of fibrillar assemblies) rather than the cavitation phenomenon. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

孔型立轧过程的三维刚塑性有限元分析

采用三维刚塑性有限元法对２Ｓ－Ａｌ板孔型立轧稳态过程进行了分析和比较，所得轧件断面形状，轧制力及轧制力矩与文献「１」的实验结果吻合很好，计算精度有所提高。     

Relaxation mechanism of rotational type in fracture of weld joints for austenic steels

Studied is the mesoscale behavior of plastic deformation and fracture of weld joints for austenic steels. Large-scale rotational modes of deformation in heat affected zones are identified with the first stage of formation of band structures; it is related to the “traveling neck” phenomenon in the base metal. The second stage is connected with crack generation and the state of affairs in the heart-affected zone.     

固体材料的变形—断裂转变

总结评述了固体材料表现出韧或脆性,也即变形和断裂及其相互转变的力学条件。收列大量事例以说明变形—断裂转变的各种表现形式及各种条件参数的影响。提出一种能概括各种变形和断裂行为的变形—断裂转变示图。总结表明,材料的断裂行为主要受尺寸参数D和性能参数(K_c/σs)~2控制,在不同的状态条件下,可表现为弹性变形、弹性断裂、弹塑性变形、弹塑性断裂、塑性流动或倒塌、全塑性断裂等多种力学行为。     

On stress rate and plasticity constitutive equations referred to a body-fixed coordinate system

Investigators have viewed the stress rate in two different ways: the material (body-fixed) point of view and the Eulerian point of view. We discuss the Zaremba–Jaumann rate and Oldroyd’s rate from the material viewpoint and apply them to the material formulation of a theory of plasticity for materials undergoing anisotropic plastic deformation. Significant advantages of the material formulation are that the derivation of equations is straight forward, the distortion of yield surface can be easily accounted for, and the issue of self-consistent elastic equation does not arise.     

热塑料板膜工艺与热塑料教具

热塑料板膜工艺是用热成型方法制作单件塑料教具和塑料配件的一种技术，它为无塑料制品生产能力的大、中院校物理、化学、生物实验室在研制教学仪器或做仿真制品时提供可行的石膏——锡模方法．教师采用该工艺，可在无现成模具和无注塑设备的条件下生产塑料教具，并可为计算机虚拟教学，提供实体模型．     

固支加筋方板的大挠度塑性动力响应

本文详细分析了爆炸载荷作用下固支回筋方板的大挠度塑性动力响应，给出了各种可能的运动模拟以及相应的差别条件，导出了最大残余变形的计算式，与文献［３］的试验结果比较表明，在多数情况下符合良好。     

板壳塑性屈曲中的佯谬及其研究进展

本文详细论述了板壳塑性屈曲中的佯谬及其研究进展。并对现有的各种观点作了分析讨论。