Experimental investigation of supersonic radiation propagation in low-density plastic and copper-doped foams

1 Introduction The investigation of supersonic radiation wave transporting in low density foam pro-duced by thermal radiation is of crucial importance in inertial confinement fusion (ICF) research[1]. When the intense radiation flux is incident in the media, first, a supersonic heat wave is formed which propagates into the undisturbed material. In time, due to the increasing mass of heated material, it slows down and is overtaken by a shock wave,thus becoming of the ablative type. Normally, …     

镶炭泡塑对阴离子表面活性剂吸附性能的研究

提出了用镶炭泡塑处理含阴离子表面活性剂的废水，并通过实验证实，经活化的泡塑对ＬＡＳ有明显的富集作用，且发现将活化过的活性炭填镶进去，可形成具有复合功能的处理剂，对含ＬＡＳ废水的处理效果更佳。     

Glassy metallic plastics

This paper reports a class of bulk metallic glass including Ce-, LaCe-, CaLi-, Yb-, and Sr-based metallic glasses, which are regarded as glassy metallic plastics because they combine some unique properties of both plastics and metallic alloys. These glassy metallic plastics have very low glass transition temperature (Tg~25oC to 150oC) and low Young’s modulus (~20 GPa to 35 GPa). Similar to glassy plastics, these metallic plastics show excellent plastic-like deformability on macro-, micro- and even nano-scale in their supercooled liquid range and can be processed, such as elongated, compressed, bent, and imprinted at low temperatures, in hot water for instance. Under ambient conditions, they display such metallic properties as high thermal and electric conductivities and excellent mechanical properties and other unique properties. The metallic plastics have potential applications and are also a model system for studying issues in glass physics.     

Physical design of positronium time of flight spectroscopy apparatus

Positronium time of flight spectroscopy（Ps-TOF）is an effective technique for porous material research.It has advantages over other techniques for analyzing the porosity and pore tortuosity of materials.This paper describes a design for Ps-TOF apparatus based on the Beijing intense slow positron beam,supplying a new material characterization technique.In order to improve the time resolution and increase the count rate of the apparatus,the detector system is optimized.For 3 eV o-Ps,the time broadening is 7.66 ns and the count rate is 3 cps after correction.     

Elastic and plastic deformation of NaCl and Ni3Al polycrystals during compression in a multi-anvil apparatus

Abstract

The compression behaviour in a multi-anvil apparatus of pure NaCl and of a foil of Ni₃Al embedded in a pressure medium of NaCl has been studied by energy-dispersive X-ray diffraction. At ambient temperature, the pressure and stresses, determined from line positions of NaCl, were constant throughout the sample chamber. Line positions and line widths of NaCl reflections were reversible on pressure release. A saturation of microstrains observed in NaCl at 2 GPa is thus attributed to brittle fracture setting in at uniaxial stresses of around 0.3 GPa. Ni₃Al polycrystals, in contrast, undergo extensive (ductile) plastic deformation above 4 GPa. The compression behaviour of both Ni₃Al and NaCl is identical to that previously determined in a diamond anvil cell. While a multi-anvil device thus has the advantage, compared with a diamond anvil cell, of constant pressure and stress throughout the sample chamber, microstrains in poly-crystalline samples arise in both devices. Samples in a multi-anvil apparatus thus need to be mixed with a pressure medium and to consist of essentially single crystals just as in a diamond anvil cell. Annealing experiments at high pressures confirm that the release of the uniaxial stress component in the pressure medium does not cause a release of microstrains in the embedded sample if the latter has been plastically deformed. Annealing for the purpose of attaining hydrostatic conditions in compression studies thus has to be carried out with care.     

Fundamental relationships between deformation-induced surface roughness,critical strain localisation and failure in AA5754-O

This research employs two approaches to characterise the apparent structure observed in localised strain maps constructed from surface topography data acquired from AA5754-O sheet stock that was deformed in three in-plane stretching modes. The first uses a conventional two-point autocorrelation function (ACF), while the second uses the combination of the eigenvalue spectrum associated with each map and information theory. The results from the ACF analysis are inconclusive, implying that this technique lacks the sensitivity necessary to quantify the relationships between multi-point clustering and strain localisation. The information theory-based approach reveals that the relative spectral entropy increases monotonically, attains a maximum and then decreases sharply to the failure strain. This behaviour occurs in all three strain modes and results from two competing processes: one where the formation of structure is favourable and one where it is not. The crossover point is a clear indicator of the onset of critical strain localisation and, therefore, can be regarded as a precursor to failure because once the dominant process shifts, additional strain results in the precipitate formation of a critical strain localisation event.     

Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation

A Cu–Fe nanocomposite containing 50 nm thick iron filaments dispersed in a copper matrix was processed by torsion under high pressure at various strain rates and temperatures. The resulting nanostructures were characterized by transmission electron microscopy, atom probe tomography (APT) and Mössbauer spectrometry. It is shown that α-Fe filaments are dissolved during severe plastic deformation leading to the formation of a homogeneous supersaturated solid solution of about 12 at% Fe in fcc Cu. The dissolution rate is proportional to the total plastic strain but is not very sensitive to strain rate. Similar results were found for samples processed at liquid nitrogen temperature. APT data revealed asymmetric composition gradients resulting from deformation-induced intermixing. On the basis of these experimental data, the formation of the supersaturated solid solutions is discussed.     

Microstructure evolution during severe plastic deformation

Radiotracer diffusion studies of severely deformed, ultra-fine grained materials have revealed the presence of ultra-fast transport paths, which include “non-equilibrium” grain boundaries and free volume. Under some experimental conditions, percolating porosity is produced even in pure copper. Micro-cracks may form in metals, if the local maximum shear stress exceeds the shear yield stress. However, their growth and propagation is postponed till late in the deformation process owing to the ductility of metals, the hydrostatic component of the stress system and/or dynamic recovery/recrystallization. In other words, crack growth and propagation is present only when the scope for further deformation is highly restricted. Using this approach, the load required for equal channel angular pressing, the change in the slope of the Hall–Petch plot with decreasing grain size and the theoretical limit for the smallest grain size attainable in a metal in a severe plastic deformation process are predicted and validated by experimental results. Experimentally successful prevention of percolated crack formation by the superposition of a hydrostatic pressure is also accounted for using this model.     

Continuum model for dislocation dynamics in a slip plane

In this paper, we present a continuum model for dislocation dynamics in a slip plane, which accurately incorporates both the long-range interaction and the local line tension effect of dislocations. Unlike the continuum models in the literature using dislocation densities, we use the disregistry across the slip plane to represent the continuous distribution of dislocations in the slip plane, which has the advantage of including the orientation dependence of dislocations in a very simple way. The continuum dislocation dynamics model is validated by linear instability analysis of a uniform dislocation array to small perturbations and comparisons of the results with those of the discrete dislocation dynamics model. Numerical examples for the evolution of distributions of dislocations and plastic slips in a slip plane are presented.     

A comparison of the von Mises and Hencky equivalent strains for use in simple shear experiments

The von Mises equivalent strain increment is derived for the case of large strain simple shear (torsion testing). This is used, in conjunction with the von Mises yield surface, to define the von Mises equivalent stress as well as the incremental work per unit volume. Integration of the equivalent strain increment leads to the definition of the von Mises equivalent strain for torsion. The Hencky equivalent strain increment is derived from the Hencky strain defined as the logarithm of the semi major and minor axes of the strain ellipse. This is then used, via the incremental work, to derive the ‘Hencky equivalent stress’. In the Onaka approach, the numerical values of the principal strain increments were integrated without taking into account the continuous rotation of the strain ellipse. This invalid operation leads to an expression for the equivalent strain increment that cannot be applied to the large strains considered by Onaka. Using the correct increments of the Hencky strain, it is shown that the shear strain increments turn negative and consequently, the incremental work becomes negative when the shear is large.