Spectrochemical Properties of Noncubical Transition Metal Complexes in Solution. XII. Angular Overlap Studies of Salicylideneethylenediamine Cu(II) Complex in Various Solvents

As a part of our general interest in the UV-Vis spectroscopy of multidentate mixed-donor ligands, the (salicylideneethylenediamine)Cu(II) complex has been prepared and characterized by elemental analyses, solubility in common solvents, molar conductivities, and ultraviolet (UV), and visible (Vis) spectroscopy. The combined results of spectrophotometric measurements and EPR spectra, as well as known the X-ray structure for solids, were used to determine the structure of the investigated complex in solutions. The spectra of [Cu(salen)] (H₂salen = salicylideneethylenediamine), were measured in various solvents at room temperature, resolved by Gaussian analysis, and angular overlap model (AOM) treated in C _2v symmetry. Because of overparametrization problems, the bis(salicylaldehyde)Cu(II) complex has been characterized and AOM treated. The results of this have been used for AOM studies of [Cu(salen)]. The effect of the solvents upon the - and -bonding ligand abilities is discussed.     

流动注射化学发光法测定尿酸

在碱性条件下,铁氰化钾氧化鲁米诺,产生化学发光,尿酸对该体系的化学发光有显著的增强作用（亚铁氰化钾存在时）。基于此,建立了一种直接测定尿酸的流动注射化学发光分析法。方法的线性范围为２．０×１０－８～５．０×１０－６　ｇ／ｍＬ;检测限（３σ）为６．７×１０－９　ｇ／ｍＬ;相对标准偏差为１．１％（尿酸１．０×１０－７　ｇ／ｍＬ,ｎ＝１１）。用于血清及尿样中尿酸的分析,结果令人满意。     

聚肽刚性链/聚氧化丙烯嵌段共聚物的合成与相行为

采用活性阴离子聚合方法,以不同分子量的聚氧化丙烯为引发剂合成了不同分子量的聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物,并用^1H-NMR、IR和偏光显微镜等方法对共聚物进行了表征。结果表明：在1,1,2,2－四氨乙烷中,当溶液浓度一定时,聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物呈现出胆甾型液晶的性质。温度升高时,聚（γ－苯甲酯－L－谷氨酸）共聚物的液晶相溶液发生相转变行为,并且其液晶相稳定性低于相同分子量的聚（γ－苯甲酯－L－谷氨酸）。这与利用Flory-Matheson的构象可变液晶分子理论模型的计算结果相一致。     

连续流动注射法测定土壤和植物中全磷

应用AA3型连续流动分析仪测定了土壤和植物中全磷.结果表明:对于采用高氯酸-硫酸消解的土壤样品以及硫酸-过氧化氢消解的植物样品,在测定时调节反应混合液的酸度使其在显色的适宜范围内,磷的质量浓度在6 mg·L-1(土壤)和7.5 mg·L-1(植物)以内呈线性,相关系数分别为0.999 2(土壤)和0.999 6(植物);加标回收率98.5%～100.5%,相对标准偏差小于2%,检出限分别为0.010 mg·L-1(土壤)和0.013 mg·L-1(植物).     

Rabbit Monoclonal Antibody-Based Lateral Flow Immunoassay Platform for Sensitive Quantitation of Four Sulfonamide Residues in Milk and Swine Urine

Based on the available rabbit monoclonal antibody (RabMAb), a rapid and sensitive lateral flow immunoassay (LFA) platform has been developed for quantitative detection of four sulfonamide residues(SRs) of sulfadiazine (SD), sulfathiazole (STZ), sulfapyridine (SP), and sulfamethoxazole (SMX).Within the designed LFA competitive format assay, which was based on antigen-antibody properties, the hapten conjugate N¹-[4-(carboxymethyl)-2-thiazolyl] sulfanilamide linked to protein ovalbumin (TS-OVA) and goat anti-rabbit antibody were sprayed as capture and control reagents, respectively, and then the antibody was conjugated to colloidal gold particles as the detection reagent. With quantitative assessment aided by a colorimetric strip reader, the sensitivities of the established LFA method for SD, STZ, SP, and SMX were 0.91 ng mL^?1, 0.10ng mL^?1,0.12ng mL^?1, and 2.13ng mL^?1, and the half-maximum inhibition concentrations (IC₅₀) were 5.19 ng mL^?1, 1.25 ng mL^?1, 0.66 ng mL^?1, and 24.14 ng mL^?1, respectively. The recoveries at three spiked levels (5, 20, 50 ng mL^?1for SD, STZ, and SP; 20, 50, 100 ng mL^?1 for SMX) were in the range of 78.02–135.10% and 76.40–137.16% for milk and swine urine, respectively. More importantly, the detection performance of the established platform was consistent with that of in-parallel LC-MS/MS analysis. In conclusion, the proposed LFA platform has showed the potential for fast, sensitive and relatively accurate quantification of four sulfonamide residues in practical uses.     

Viscosity and Thermodynamics of Viscous Flow of 1-propanol with Aniline,N-methylaniline and N,N-dimethylaniline

Abstract

Viscosities of the systems, 1-propanol + aniline, 1-propanol+N-methylaniline and 1-propanol+N,N-dimethylaniline have been measured in the temperature range 294.15 to 323.15K for the whole range of composition. The viscosities have been plotted against mole fraction of anilines. The viscosity-composition curves show minima, though not well-defined, in highly rich, moderately rich and moderately poor regions of 1-propanol respectively for 1-propanol + aniline, 1-propanol + N-methylaniline and 1-propanol +N,N-dimethylaniline systems. The excess viscosities have been found to be negative for all the systems throughout the whole composition and plotted against mole fraction of anilines. The thermodynamic activation parameters, such as, enthalpies, entropies and free energies and their excess values have been evaluated. The excess free energies have been found to be negative for all the systems and over the whole range of composition. The excess free energies have been plotted against the mole fraction of anilines. The viscosities, excess viscosities and excess free energies have been explained by assuming that the associated compounds, aniline, N-methylaniline and 1-propanol, are dissociated into smaller units in the solution systems by the rupture of H-bonds.     

Batch and Flow Injection Fluorimetric Determination of Fluoxetine

Abstract

A method for the fluorimetric determination of fluoxetine in continuous and discontinuous systems is reported. The method is based on the hydrolysis of fluoxetine in acid medium. The fluorescent product has a spectrum with excitation and emission maxima at 253 and 306 nm, respectively. The method was applied to the determination of fluoxetine in pharmaceutical products.     

蘑菇组织催化氧化-流动注射荧光法测定去甲肾上腺素和左旋多巴

研究发现富含多酚氧化酶的蘑菇组织可催化溶解氧氧化去甲肾上腺素和左旋多巴在碱性条件下生成具有强荧光的三羟基和二羟基吲哚类物质 ,建立了以蘑菇组织柱为酶反应器的去甲肾上腺素和左旋多巴的流通式荧光分析法 .该法对去甲肾上腺素和左旋多巴响应的线性范围分别为 6× 10 -8～ 1× 10 -5g·mL-1和 3× 10 -8～ 1× 10 -5g·mL-1,检测限分别为 2×10 -8g·mL-1和 1× 10 -8g·mL-1( 3S/k) .该组织反应器可连续使用 14d ,对 1× 10 -7g·mL-1去甲肾上腺素和 1× 10 -7g·mL-1左旋多巴测定的相对标准偏差 (R .S .D .)均小于 3 % (n =11) .详细研究了常见离子和抗氧化剂对本体系的干扰情况 .将该体系用于药物制剂中去甲肾上腺素和左旋多巴含量的测定 ,结果与药典标准方法测得值一致 .实验结果证明了方法的可行性和可靠性     

Synthesis And Properties Of Functional Ultra-High Molecular Weight Transparent Styrene-Butadiene Block Copolymer

Functional ultra-high molecular weight transparent styrene-butadiene block copolymer possesses both high transparency and impact resistance and has excellent comprehensive properties prior to other transparent resins. In this paper we not only use anionic polymerization process which includes 1 time addition of initiator and 3 time addition of monomers, but also introduce functional coupling agent for the fist time to prepare mentioned functional block copolymer. The typical preparation proces…