微波消解ICP-AES法测定玩具塑料中镉

采用微波加压消解溶样，ICP-AES法测定玩具塑料中镉含量，选择最佳工作条件，方法简便、快速、可靠。适用于各类玩具塑料中镉含量的分析。     

PC聚合物的再利用研究

聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优异的热塑性工程塑料,具有较高的回收价值.采用熔融再生方法分别对同种无涂层手机外壳、浅色混杂带涂层和深色混杂带涂层手机外壳三种PC回收料进行了再生利用,对注塑样品进行了力学性能测试,并对断口进行了分析.研究结果表明,三种PC回收料再生后拉伸强度和弯曲强度值较为接近,其中拉伸强度略低于PC原生料,而弯曲强度高于原生料.无涂层PC回收料延伸率和冲击韧性分别达到了24kJ/m2和65;,而混杂带涂层回收料只有它的一半左右.     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

有限宽板孔边弹塑性变形测试

测量应变集中区域的弹塑性变形，对于研究材料损伤或微裂纹的产生，以预防宏观裂纹的产生及扩展具有重要的意义。为给航空发动机轮盘的损伤容限设计研究提供相关材料的力学实验参数，做了两个有限宽中心带孔试件的拉伸试验。试验中，采用单调逐级加、卸栽的循环加栽方式，并应用自动网格法和数字图像相关技术测量了孔用的全场位移分布。再应用最小二乘法将离散的位移分量拟合成二元多项式函数，求解出拉伸方向的应变分布，并给出孔边应力σ与孔边应变εy的关系曲线。     

On the influence of singular-type finite elements on the critical force in studying the buckling of a circular plate with a crack

The axisymmetric buckling (delamination) of a circular disk (plate) with a penny-shaped crack is analyzed using a continuum model, piecewise-homogeneous model, and the three-dimensional linearized theory of stability. The FEM is used. The analysis is carried out using various singular and ordinary finite elements. The numerical results obtained indicate that it is not necessary to use singular finite elements to solve the problem Published in Prikladnaya Mekhanika, Vol. 43, No. 9, pp. 120–129, September 2007.     

Two-parameter failure criterion for elastoplastic bodies with mode I cracks

The generalized Dugdale crack model is used to formulate two-parameter failure criteria for the cases of quasibrittle state and developed plastic zones at a mode I crack tip. The failure criteria relate the fracture strength characteristics and the stress mode at the crack tip through the plastic constraint factor. The critical state of bodies with cracks under uni-and biaxial loading is analyzed in the cases of plane stress and plane strain using the Tresca and von Mises yield criteria. A small-scale yield criterion, which is an analytic relation between the critical stress intensity factor and T-stresses, is established __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 47–57, July 2007.     

Axial instability of double-nanobeam-systems

This Letter considers the axial instability of double-nanobeam-systems. Eringen's nonlocal elasticity is utilized for modelling the double-nanobeam-systems. The nonlocal theory accounts for the small-scale effects arising at the nanoscale. The small-scale effects substantially influence the instability (or buckling) of double-nanobeam-systems. Results reveal that the small-scale effects are higher with increasing values of nonlocal parameter for the case of in-phase (synchronous) buckling modes than the out-of-phase (asynchronous) buckling modes. The increase of the stiffness of the coupling elastic medium in double-nanobeam-system reduces the small-scale effects during the out-of-phase (asynchronous) buckling modes. Analysis of the scale effects in higher buckling loads of double-nanobeam-system with synchronous and asynchronous modes is also discussed in this Letter. The theoretical development presented herein may serve as a reference for nonlocal theories as applied to the instability analysis of complex-nanobeam-system such as complex carbon nanotube system.     

非保守力作用下杆的塑性动态稳定性

本文用Liapunov第二方法分析非保守力作用下直杆的塑性动态稳定性.杆处于粘性阻尼介质中,并受到切向均布的随动载荷作用.分析中在应力-应变关系中引入了应变率效应.导出了一个稳定性条件,并求出了临界失稳载荷,讨论了应变率效应对杆的稳定性的影响.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

冲击条件下含纳米空洞的单晶铜的塌缩

利用分子动力学方法研究了单晶铜中不同大小的球形空洞在冲击波下的演化过程.模拟结果表明不同大小空洞的塌缩过程不同.模拟中冲击波由空洞左边扫向空洞右边.在较大尺寸的空洞塌缩过程中会产生系列的位错环.当空洞半径较小时,先在空洞的右侧形成位错环,当空洞半径增大到某一临界大小时,在空洞左右两侧同时产生位错环,当空洞半径较大时,先在空洞左侧形成位错环.当空洞左右两侧的位错环均形成以后,其右侧位错环前端的生长速度大于其左侧的.空洞半径增大,相应的位错环前端的生长速度变化不大.当空洞半径增大时,空洞中心指向位错源的矢量方 关键词： 纳米空洞 位错环 冲击波 塑性变形