Design rule of indium bump in infrared focal plane array for longer cycling life

In light of the proposed equivalent method, a three-dimensional structural modeling of InSb infrared focal plane arrays (IRFPAs) is created, and the simulated strain distribution is identical to the deformation distribution on the top surface of InSb IRFPAs. After comparing the deformation features at different regions with the structural characteristics of IRFPAs, we infer that the flatness of InSb IRFPAs will be improved with a thinner indium bump array, and this inference is verified by subsequent simulation results. That is, when the diameter of indium bump is smaller than 20 μm, the simulated Z-components of strain on the whole top surface of InSb IRFPAs is uniform, and the deformation amplitude is small. When the diameter of indium bump is larger than 28 μm, the simulated Z-components of strain increases rapidly with the thicker indium bump, and the flatness of InSb IRFPAs is worsened rapidly. According to the changing trend of deformation amplitude with diameters of indium bump, and employing element pitches normalization method, a design rule of indium bump is proposed. That is, when the diameter of indium bump is shorter than 0.4 times the element pitch, the flatness of InSb IRFPAs is in an acceptable range. This design rule was supported by different IRFPAs with different formats delivered by several main research groups for achieving a longer cycling life.     

基于kinect和unity的虚拟手抓取碰撞检测算法

针对目前碰撞检测算法效率低精度差的问题,提出了一种改进的层次方向包围盒（OBB）算法。首先通过位置关系判断虚拟手是否在物体包围球的邻近区域,然后用OBB和八叉树算法进行详细的碰撞检测,最后利用离散点到虚拟手简化面的矢量计算法实现精确的碰撞检测。实验结果表明,随着三维物体基元数目的增多,这种由粗略到精确递进的检测方式极大的提高了碰撞检测的效率和精度,具有可行性。该算法适用于任何复杂场景中刚体结构模型的碰撞检测,在运行时候不存在滞后情况,显示流畅,而且碰撞检测精度高,完全能够满足虚拟环境实时性和精确性的要求。     

1/f Noise QWIPs and nBn detectors

The low-frequency noise is a ubiquitous phenomenon and the spectral power density of this fluctuation process is inversely proportional to the frequency of the signal. We have measured the 1/f noise of a 640 × 512 pixel quantum well infrared photodetector (QWIP) focal plane array (FPA) with 6.2 μm peak wavelength. Our experimental observations show that this QWIP FPA’s 1/f noise corner frequency is about 0.1 mHz. With this kind of low frequency stability, QWIPs could unveil a new class of infrared applications that have never been imagined before. Furthermore, we present the results from a similar 1/f noise measurement of bulk InAsSb absorber (lattice matched to GaSb substrate) nBn detector array with 4.0 μm cutoff wavelength.     

Fabrication of type-II InAs/GaSb superlattice long-wavelength infrared focal plane arrays

In this paper, we present an InAs/GaSb type-II superlattice (SL) with the M-structure for the fabrication of a long-wavelength (10 μm range) infrared (LWIR) focal plane arrays (FPA), which are grown by molecular beam epitaxy (MBE). The M-structure is named for the shape of the band alignment while the AlSb layer is inserted into the GaSb layer of InAs/GaSb SL. A 320 × 256 LWIR FPA has been fabricated with low surface leakage and high R₀A product of FPA pixels by using anodic sulfide and SiO₂ physical passivation. Experiment results show that the devices passivated with anodic sulfide obviously have higher R₀A than the un-sulphurized one. The 50% cutoff wavelength of the LWIR FPA is 9.1 μm, and the R₀A is 224 Ω cm² with the average detectivity of 2.3 × 10¹⁰ cm Hz^1/2 W⁻¹.     

导弹发射姿态测量方法研究

针对导弹发射姿态测量问题,提出采用高速摄像机通过斜瞄和平瞄姿态测量方法求解导弹中轴线俯仰角和方位角,仿真典型导弹起飞段近距离姿态测量,分析两种测量方法对导弹飞行姿态测量精度和适用性。仿真结果表明:平瞄和斜瞄姿态测量方法,测量误差在0.2°以内。斜瞄方式使用更便捷,通用性好。平瞄方式测量精度高,数据处理方法、机械结构相对简单,在适合的应用场合优势明显。此分析方法、分析结果为姿态测量方法选取和研究等提供一种可行的途径,也可为其它运动目标的姿态测量提供借鉴。     

Co3O4纳米晶催化氧化甲烷的理论研究：C-H键活化的晶面效应及活性中心

甲烷是一种在自然界中大量存在的原材料,在取代原油和合成重要化工产品等许多领域具有潜在的应用价值. 然而,由于CH₄中C-H键的键能特别大（约~4.5 eV）,如何实现甲烷的绿色有效转化在化学化工领域仍然是一个挑战. 本文采用密度泛函理论对Co₃O₄（001）和（011）晶面活化甲烷C-H键的机理进行了理论研究,得到了如下结论：（1） CH₄的C-H键在Co₃O₄晶面的解离具有很高的活性,只需要克服大约1 eV的能垒;（2）与Co^2＋相连的Co-O离子对是CH₄活化的活性位点,其中两个带正负电荷的离子对C-H解离起着协同作用,帮助产生Co-CH₃和O-H物种;（3）（011）面的反应活性明显大于（001）面,与实验的观察一致. 本文的计算结果表明,Co₃O₄纳米晶面对CH₄中C-H键的活化表现出明显的晶面效应和结构敏感效应,Co-O离子对活性中心对于活化惰性的C-H键发挥了关键作用.     

LOBSTER: Local orbital projections,atomic charges,and chemical-bonding analysis from projector-augmented-wave-based density-functional theory

We present an update on recently developed methodology and functionality in the computer program Local Orbital Basis Suite Toward Electronic-Structure Reconstruction (LOBSTER) for chemical-bonding analysis in periodic systems. LOBSTER is based on an analytic projection from projector-augmented wave (PAW) density-functional theory (DFT) computations (Maintz et al., J. Comput. Chem. 2013 , 34, 2557), reconstructing chemical information in terms of local, auxiliary atomic orbitals and thereby opening the output of PAW-based DFT codes to chemical interpretation. We demonstrate how LOBSTER has been improved by taking into account time-reversal symmetry, thereby speeding up the DFT and LOBSTER calculations by a factor of 2. Over the recent years, the functionalities have also been continually expanded, including accurate projected densities of states (DOSs), crystal orbital Hamilton population (COHP) analysis, atomic and orbital charges, gross populations, and the recently introduced k -dependent COHP. The software is offered free-of-charge for non-commercial research.     

基于平面通量展开的三维Pin by Pin输运SP3计算

基于Pin by Pin输运SP3计算是下一代反应堆物理计算方法中一个重要的研究方向.节块法一般采用高阶通量和中子源展开以适应较大的节块尺寸,因此对于Pin by Pin计算来说效率偏低.由于反应堆堆芯不均匀性更多发生在径向,本文提出一种径向基于二维平面通量展开结合轴向常规节块法的综合方法进行三维Pin by Pin输...     

光斜入射时偏振器作用的表述

对偏振器特性的分析表明,当光斜入射时,振动方向与偏振器透光轴不平行的光也能通过偏振器,只要该方向与系统光轴与透光轴构成的平面平行。提出了透光平面的概念。利用欧拉角表示光波坐标系和偏振器坐标系之间的变换,得到透过偏振器后偏振光的振动方向及其大小的数学表述,给出了简化表达式及其使用条件。表达式具有一般性,可以直接使用。     

A hybrid numerical approach to predict the vibrational responses of panels excited by a turbulent boundary layer

In this work, a hybrid numerical approach to predict the vibrational responses of planar structures excited by a turbulent boundary layer is presented. The approach combines an uncorrelated wall plane wave technique with the finite element method. The wall pressure field induced by a turbulent boundary layer is obtained as a set of uncorrelated wall pressure plane waves. The amplitude of these plane waves are determined from the cross spectrum density function of the wall pressure field given either by empirical models from literature or from experimental data. The response of the planar structure subject to a turbulent boundary layer excitation is then obtained from an ensemble average of the different realizations. The numerical technique is computationally efficient as it rapidly converges using a small number of realizations. To demonstrate the method, the vibrational responses of two panels with simply supported or clamped boundary conditions and excited by a turbulent flow are considered. In the case study comprising a plate with simply supported boundary conditions, an analytical solution is employed for verification of the method. For both cases studies, numerical results from the hybrid approach are compared with experimental data measured in two different anechoic wind tunnels.