高性能计算机用热管复合制冷系统设计研究

根据高性能计算机全天候温控的需要,提出了综合应用蒸气压缩和动力型分离式热管制冷技术的复合冷源方案。在冬季及春、秋过渡的低温季节,运行热管循环不仅大幅降低环控装置的能耗,而且可以避免在低温环境运行压缩式制冷易发生的冷启动、回油润滑等问题。提出了蒸气压缩制冷、蒸气压缩/热管复合制冷和热管制冷的分区工作模式,引入复合制冷模式有效拓宽了热管运行温区,大幅提高了制冷系统的综合COP。模拟分析了在北京地区应用热管复合制冷技术的节能性能,相比常规的压缩制冷节能率高达40%。研究表明:热管复合制冷系统具有显著的节能减排优势,特别适用于全天候工作的机房、基站等高热密度电子集成系统的温控。     

Mural inspection by vibration measurements with TV-holography

A commonly encountered problem in the conservation of historical murals is the identification of sections in the plaster that have detached from the wall and thus threaten to fall off. Commonly, walls are inspected by the acoustic response to a gentle finger-tapping (percussion method). Since this is a costly and cumbersome technique, means for a more automatic inspection are searched for. A TV-holography system of increased sensitivity in combination with acoustic excitation of the object is shown to be a new and powerful tool for monitoring of loose areas. It has the advantage of non-contact and remote operation which, for example, is extremely useful in large buildings. Principles of the method, experimental results obtained at an artificial wall in the laboratory, and a thorough comparison of results from historical sites gained by the traditional percussion method and the new technique are presented. The latter shows very good agreement in the assessment of wall quality and thus is evidence of the suitability of the optical equipment for tasks in conservation.     

用于高热流密度器件冷却的热管散热器实验研究

针对大型计算机服务器CPU的耗能量,探讨了一种新的热管排布方式的散热器,并对其散热性能进行了实验研究.研究结果表明,采用此种热管散热器,最高热流密度为74.3W/cm2,其冷却风速控制在4m/s即可满足芯片冷却要求.同时根据模拟计算得到的散热器底板温度分布,可有助于对热管排布方式的优化设计.     

高炉冲渣水余热回收的可行性研究

根据高炉冲渣水的余热特点,提出了一个采用分离式热管换热器的余热回收的方案。文中对余热回收方案中换热设备的结构特点进行了描述。     

Waterhammer modelling of viscoelastic pipes with a time-dependent Poisson's ratio

Poisson's ratio in viscoelastic materials is a function of time. However, recently developed waterhammer models of viscoelastic pipes consider it constant. This simplifying assumption avoids cumbersome calculations of double convolution integrals which appear if Poisson's ratio is time-dependent. The present research develops a mathematical model taking the time dependency of Poisson's ratio into account for linear viscoelastic pipes. Poisson's ratio is written in terms of relaxation function and bulk modulus which is assumed to be constant. The relaxation function is obtained from creep function given as the viscoelastic property data of pipe material. The results obtained from the present waterhammer model are compared with the experimental data for two different flow rates. The comparison reveals that with the application of the time-dependent Poisson's ratio and unsteady friction, the viscoelastic data of mechanical tests can directly be used for waterhammer analysis with less need for the calibration of the flow configuration. It was also shown that the creep curve calibrated based on the present model is closer to the actual creep curve than that calibrated based on previous models.     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.     

校园网络数据资源分层访问策略

分析了校园ＭＩＳ及数据资源的特征,针对校园信息资源范围广、关联复杂的状况,提出了数据资源统一访问策略——分层访问．数据访问分为七层,各层完成数据访问独立性的特定功能,使不同的访问软件能透明访问全部数据资源．为保证传统应用能基于网络计算访问统一数据资源,又提出了“数据访问管道”和数据库访问服务器的技术．文章分析了以应用服务器为基础的Ｎ－Ｔｉｅｒｓ计算的弊端,设计了“虚拟应用服务器”ＷＵＶ－ＡＰＰＳ,将数据访问对象构造成数据对象组件．     

计量调整型抽样检验系统GB/T6378-1986与ISO3951 :1989的比较分析

GB/T6378-1986作为计量抽样检验方面的基础性国家标准,是参照国际标准ISO3951:1989而制定的。1989年国际标准化组织ISO/TC69发布了ISO3951的修订版本ISO3951:1989,ISO3951的这一修订版反映了计量抽样检验的最新研究成果,为开展国家标准GB/T6378的修订工作,本文系统地对GB/T6378-86和ISO3951:89进行了比较分析研究。     

自动实时激光全息无损检测系统

介绍一种自动激光全息无损检测系统。该系统由计算机控制自动曝光，并对全息干版进行自动冲洗和对测量数据进行处理，解决了一次曝光激光全息实时检测中全息干版无法精确复位的问题。计算机控制真空加载，缺陷大小及位置由计算机打印输出，一次最大测量面积为０５ｍ×１２ｍ，最小分辨缺陷尺寸为３ｍｍ。     

Technically optimal inspection policy with arithmetical adaption

A process is considered whose quality deteriorates accordingto a constant failure intensity . As in practice it can be difficultto estimate the true value of the purpose of this paper isto present a strategy which can be applied without knowing .In order to maximize the number of conforming items per timeunit perfect inspections and renewals are performed. The lengthof the inspection interval is described by an arithmetical sequenceand changes by the time depending on perceived assignable causes.Optimal adaptive control plans provide nearly the same performanceas in the case when is known.