Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

A critique of the unsaturable trap model of radiation damage in metals

The unsaturable trap model, which attributes the increase of the electrical resistivity of fcc metals during electron irradiation in the temperature regime of Stage-II recovery to the trapping of Stage-I_E interstitials at impurity atoms, is shown to be in serious disagreement with the experiments, contrary to opposite statements in the literature. As shown recently, the predictions of the unsaturable trap model are independent of the dimensionality of the diffusion of the Stage-I_E interstitials. Previous attempts to rule out a one-dimensional migration of the Stage-I_E interstitials (and hence the two-interstitial model) on the basis of the alleged agreement of the unsaturable trap model with Stage-II damage curves are thus meaningless. On the contrary, it is demonstrated that the two-interstitial model accounts for minute details of the measured Stage-II damage curves in a natural way.     

FREE VIBRATION ANALYSIS OF LATTICE SANDWICH BEAMS UNDER SEVERAL TYPICAL BOUNDARY CONDITIONS

Free vibration problems of lattice sandwich beams under several typical boundary conditions are investigated in the present paper. The lattice sandwich beam is transformed to an equivalent homogeneous three-layered sandwich beam. Unlike the traditional analytical model in which the rotation angles of the face sheets and the core are assumed the same, different rotation angles are considered in this paper to characterize the real response of sandwich beams. The analytical solutions of the natural frequencies for several typical boundary conditions are obtained. The effects of material properties and geometric parameters on the natural frequencies are also investigated.     

Effects of physics change in Monte Carlo code on electron pencil beam dose distributions

Pencil beam algorithms used in computerized electron beam dose planning are usually described using the small angle multiple scattering theory. Alternatively, the pencil beams can be generated by Monte Carlo simulation of electron transport. In a previous work, the 4th version of the Electron Gamma Shower (EGS) Monte Carlo code was used to obtain dose distributions from monoenergetic electron pencil beam, with incident energy between 1 MeV and 50 MeV, interacting at the surface of a large cylindrical homogeneous water phantom. In 2000, a new version of this Monte Carlo code has been made available by the National Research Council of Canada (NRC), which includes various improvements in its electron-transport algorithms. In the present work, we were interested to see if the new physics in this version produces pencil beam dose distributions very different from those calculated with oldest one. The purpose of this study is to quantify as well as to understand these differences. We have compared a series of pencil beam dose distributions scored in cylindrical geometry, for electron energies between 1 MeV and 50 MeV calculated with two versions of the Electron Gamma Shower Monte Carlo Code. Data calculated and compared include isodose distributions, radial dose distributions and fractions of energy deposition. Our results for radial dose distributions show agreement within 10% between doses calculated by the two codes for voxels closer to the pencil beam central axis, while the differences are up to 30% for longer distances. For fractions of energy deposition, the results of the EGS4 are in good agreement (within 2%) with those calculated by EGSnrc at shallow depths for all energies, whereas a slightly worse agreement (15%) is observed at deeper distances. These differences may be mainly attributed to the different multiple scattering for electron transport adopted in these two codes and the inclusion of spin effect, which produces an increase of the effective range of electrons.     

Chiralization in mesogenic 1,3-diacylaminobenzenes

The effect of molecular chirality in thermotropic mesomorphic H-bonded polymeric systems has not really been investigated so far. Therefore, five new chiral mesogenic diamides have been prepared and described. Besides more ordered mesophases, the enantiomers exhibit a chiral nematic polymorphism detected by microcalorimetry and probably corresponding to different modes of chiral coiling to give these singular twisted nematic phases.     

Optical characterization of high speed microscanners based on static slit profiling method

Optical characterization of high-speed microscanners is a challenging task that usually requires special high speed, extremely expensive camera systems. This paper presents a novel simple method to characterize the scanned beam spot profile and size in high-speed optical scanners under operation. It allows measuring the beam profile and the spot sizes at different scanning angles. The method is analyzed theoretically and applied experimentally on the characterization of a Micro Electro Mechanical MEMS scanner operating at 2.6 kHz. The variation of the spot size versus the scanning angle, up to ±15°, is extracted and the dynamic bending curvature effect of the micromirror is predicted.     

TRANSIENT ANALYSIS OF COMPOSITE PLATES BY A LOCAL RADIAL BASIS FUNCTIONS-FINITE DIFFERENCE TECHIQUE

The use of local numerical schemes,such as finite differences produces much better conditioned matrices than global collocation radial basis functions methods.However,finite difference schemes are limi...     

Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy

This paper presents a study on polycrystalline diamond (PCD) polished by dynamic friction polishing (DFP) with the aid of advanced dual beam FIB (focused ion beam) microscopy. After disclosing a variety of wear tracks by DFP using electron imaging in combination with the ion channelling effect, a dual beam FIB was successfully employed at wear track sites to specifically create both the large cross-sectional specimen for microanalysis and thin foil for nanoanalysis. The study concluded that the polished PCD subsurface was free from microscale cracking. However, the attached debris layer on the top surface contained metal oxides and non-diamond carbon phase with inhomogeneous distributions of C, Fe, Cr, Ni, Si and O across the layer. An attached layer directly above a diamond grain was composed of essentially amorphous carbon, suggesting that a direct phase transformation from diamond crystalline to amorphous occurred during DFP.     

Equivalent nonlinear beam model for the 3-D analysis of shear-type buildings: Application to aeroelastic instability

Tower buildings can be very sensitive to dynamic actions and their dynamic analysis is usually carried out numerically through sophisticated finite element models. In this paper, an equivalent nonlinear one-dimensional shear–shear–torsional beam model immersed in a three-dimensional space is introduced to reproduce, in an approximate way, the dynamic behavior of tower buildings. It represents an extension of a linear beam model recently introduced by the authors, accounting for nonlinearities generated by the stretching of the columns. The constitutive law of the beam is identified from a discrete model of a 3D-frame, via a homogenization process, which accounts for the rotation of the floors around the tower axis. The macroscopic shear strain in the equivalent beam is produced by the bending of columns, accompanied by negligible rotation of the floors. A coupled nonlinear shear–torsional mechanical model is thus obtained. The coupling between shear and torsion is related to a non-symmetric layout of the columns, while mechanical nonlinearities are proportional to the slenderness of the columns. The model can be used for the analysis of the response of tower buildings to any kind of dynamic and static excitation. A first application is here presented to investigate the effect of mechanical and aerodynamic coupling on the critical galloping conditions and on the postcritical behavior of tower buildings, based on a quasi-steady model of aerodynamic forces.