聚甲基丙烯酸甲酯/聚甲基丙烯酸-2-羟乙酯复合微球的合成及药物吸放性能

采用在甲基丙烯酸甲酯（MMA）悬浮聚合过程中滴加甲基丙烯酸-2-羟乙酯（HEMA）乳液聚合组分的悬浮-乳液耦合聚合方法,制备了大粒径聚甲基丙烯酸甲酯／聚甲基丙烯酸-2-羟乙酯（PMMA／PHEMA）复合微球。PMMA／PHEMA复合微球表面以HEMA乳液聚合物为主,且具有微孔结构。PMMA／PHEMA复合微球在水和苄醇中的平衡溶胀率大于PMMA微球。PMMA／PHEMA复合微球48h异丁苯丙酸负载百分比为35．6％,PMMA为27．6％。在磷酸盐缓冲液中释放时间达到360h,释放量占负载总量的82％;而PMMA微球的释放时间为216h,释放量仅占负载总量的60％。     

载钛催化剂的气固相法制备及其在环氧化氯丙烯反应中的催化活性

利用TiCl4气固相法,以含硅物质为原料,制备了7种钛硅氧化物类催化剂,并考察了其在H2O2环氧化氯丙烯反应中的催化活性。实验结果表明：只有以HZSM-5为载体制备的催化剂具有催化环氧化活性。酸处理HZSM-5对催化剂活性的影响并不大,分子筛的硅铝比和气固相反应时间是影响其催化活性的重要因素,且催化活性随着硅铝比的降低而降低。气固相反应时间16h时,催化剂的活性最高。     

高聚合度Ⅱ-型聚磷酸铵的合成

用聚合反应-热处理两段工艺合成了高聚合度的聚磷酸铵（APP）阻燃材料,其结构经XRD,粒度及平均聚合度表征。优化反应条件为：磷酸氢二铵1mol,n（磷酸氢二铵）：n（五氧化二磷）：n（脲）：1．0：1．0：0．3．干燥氨气氛下于290℃反应30min,再经250℃-280℃后处理100min-110min。APP的平均聚合度大于150,粒度小于50μm。     

Synthesis of the composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate in micelles

The composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate (SDBS) is synthesized in SDBS micelles. The composite material has satisfactory conductivity and thermostability, and the particle length, width, and thickness are about 200–500 m, 3–5 m, and 40–96 nm, respectively.     

Resistance properties of a macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide-impregnated polymeric adsorption material against nitric acid, temperature and γ-irradiation

The resistance of a novel silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption material (TODGA/SiO₂-P) against nitric acid, temperature and γ-irradiation had been investigated. The adsorption property of the treated TODGA/SiO₂-P was evaluated by a 3 M HNO₃ solution containing 0.01 M Nd(III). It was found that both 3 and 0.01 M HNO₃ concentrations did not decrease the stability of TODGA/SiO₂-P at 25°C. The quantity of TODGA leaked from TODGA/SiO₂-P was equivalent to its solubility in the corresponding HNO₃ aqueous solution. The effect of 3 M HNO₃ on the leakage of TODGA at 80°C was significantly higher than that in 0.01 M HNO₃ as well as in all cases at 25°C. The amount of Nd(III) adsorbed towards the treated TODGA/SiO₂-P was determined in the range of 0.143–0.148 mmol/g for the HNO₃ concentration effect and 0.142–0.0506 mmol/g for the temperature effect. γ-Irradiation showed a more noticeable destruction effect on TODGA/SiO₂-P. The content of TODGA leaked increased with an increase in the γ-irradiation dose (ID) from 1.06 to 3.72 MGy in terms of the linear equation [TODGA]=794.5ID+84.0. The amount of Nd(III) adsorbed onto the irradiated TODGA/SiO₂-P decreased rapidly from 0.134 to 0.0438 mmol/g, which was lower than 0.153 mmol/g, the adsorption of fresh TODGA/SiO₂-P for Nd(III), according to the equation Q_Nd(III)=−0.0301ID+0.160, showing that a large quantity of TODGA leaked from TODGA/SiO₂-P. The adsorbed amount of Nd(III) decreased obviously in this order: the HNO₃ concentration effect, temperature effect and γ-irradiation.     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

Synthesis,p-Nitrophenolate Complexation and Competitive Anion Signaling of Novel Calixpyrrole Dimer

A novel dimeric calixpyrrole has been synthesized. The dimer forms stable complexes with p-nitrophenolate ion with a concomitant reduction in extinction coefficient. The chromogenic anion is displaced by the addition of various anions like fluoride and acetate. Effective optical sensing of these anions is accomplished using the calixpyrrole dimer.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

纳米科技研究中的若干新热点

讨论了纳米科技在各个领域不同于常规材料的优越性和它在各个范畴内的研究热点 ,了解它的发展趋势。     

含偶氮苯并噻唑发色团的二阶非线性光学互穿网络聚合物

合成了含偶氮苯并噻吩（ＢＴ）发色团的聚氨酯／环氧树脂互穿网络聚合物（ＩＰＮ）,其中聚氨酯网络由（丙烯酸β羟丙酯 ＢＴ ２甲基丙烯酸酯）共聚物与苯酚封闭的双端异氰酸酯的ＢＴ １反应形成,而环氧树脂网络由含环氧基的ＢＴ与含ＢＴ的苯二胺反应形成．同时实施这二种反应即形成ＩＰＮ．ＩＰＮ经红外光谱、凝胶含量测定及ＤＳＣ等表征．其薄膜经１６０℃、８５ｋＶ电晕极化,由可见光谱测量及一维刚性取向气体模型计算得到宏观二阶非线性光学极化系数χ（２）为２１８×１０－７ｅ．ｓ．ｕ．,在１２０℃经２４０ｈ序参数几乎不变．