On acoustic and electric waves diffraction in piezoelectric medium by a permeable half-plane crack

The problem of electric and acoustic waves diffraction by a half-plane crack in a transversal isotropic piezoelectric medium is investigated. The crack is assumed to be electric permeable and free of tractions. The so-called “quasi-hyperbolic approximation” [15] is adopted. Applying Laplace transformations and Wiener–Hopf technique a closed form solution is obtained. By the means of Cagniard–de Hoop method a detailed dynamic full electroacoustic wavefield’s investigation is conducted. Mode conversion between electric and acoustic waves, effect of electroacoustic head wave, Bleustein–Gulyaev surface wave and the wavefield structure depending on the type of the incident wave (acoustic or electric) and its angle of incidence are analyzed in details. The dynamic field intensity factors at the crack tip depending on the angle of incidence and on time are derived explicitly. Numerical analysis is presented.     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

Influence of silicon on the microstructure and mechanical properties of Zr-Si-N composite films

A series of Zr-Si-N composite films with different Si contents were synthesized in an Ar and N₂ mixture atmosphere by the bi-target reactive magnetron sputtering method. These films’ composition, microstructure and mechanical properties were characterized by energy dispersive spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy and nanoindentation. Experimental results revealed that after the addition of silicon, Si₃N₄ interfacial phase formed on the surface of ZrN grains and prevented them from growing up. Zr-Si-N composite films were strengthened at low Si content with the hardness and elastic modulus reaching their maximum values of 29.8 and 352 GPa at 6.2 at% Si, respectively. With a further increase of Si content, the crystalline Zr-Si-N films gradually transformed into amorphous, accompanied with a remarkable fall of films’ mechanical properties. This limited enhancement of mechanical properties in the Zr-Si-N films may be due to the low wettability of Si₃N₄ on the surface of ZrN grains.     

Instability of Solitary Waves in Nonlinear Composite Media

In this paper,we investigate a class of Hamiltonian systems arising in nonlinear composite media.By detailed analysis and computation we obtain a decaying estimates on the semigroup and prove the orbitalinstability of two families of explicit solitary wave solutions (slow family in anisotropic case and solitary wavesin isotropic case),which theoretically verify the related guess and numerical results.     

ZnSe/SiO2复合薄膜光学常数与荧光光谱的研究

采用溶胶-凝胶工艺与原位生长技术，制备了ZnSe/SiO₂复合薄膜.X射线衍射分 析表明薄膜中ZnSe晶体呈立方闪锌矿结构.X射线荧光分析结果显示薄膜中Zn与Se摩尔比为1 ∶1.01—1∶1.19.利用场发射扫描电子显微镜观察了复合薄膜的表面形貌，结果表明复合薄 膜表面既存在尺寸约为400nm的ZnSe晶粒，也存在尺寸小于100nm的ZnSe晶粒.利用椭偏仪测 量了薄膜椭偏角Ψ，Δ与波长λ的关系，采用Maxwell-Garnett有效介质理论对薄膜的光学 常数、厚度、气孔率、ZnS 关键词： 2复合薄膜')" href="#">ZnSe/SiO₂复合薄膜 光学性质 椭偏光度法 荧光光谱     

Co-Orthogonal Codes

We define, construct and sketch possible applications of a new class of non-linear codes: co-orthogonal codes, with possible applications in cryptography and parallel processing. We also describe a fast and general method for generating (non-linear) codes with prescribed dot-products with the help of multi-linear polynomials.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

聚乳酸类医用生物降解材料的研究进展

聚乳酸由于其突出的优点如生物相容性好、降解产物对人体无毒而倍受重视,并且在生物医学领域的应用中获得了很好的效果。本文对聚乳酸的合成及在医学方面的应用作了总结和评述,并对其在生物医学领域的应用前景作了进一步展望。     

负折射指数物质中金属线对电磁波的影响

构造两种结构负折射指数物质(NRM)，利用数值模拟计算两种结构的S参数.由于这种结构尺度比波长小，为精确利用有限积分技术(FIT)进行模拟.通过对这两种结构中金属线位置变化对金属谐振频率影响进行模拟，最后得出由于金属线与谐振环耦合，金属线对称破缺影响谐振环谐振频率和通带，并对等效负折射指数为负的频带产生影响. 关键词： 负折射率 左手物质 通带 金属线对称破缺     

一种新的磷化铟复合沟道高电子迁移率晶体管小信号物理模型

针对磷化铟(InP)复合沟道高电子迁移率晶体管(HEMT)的特点，对常规单沟道HEMT的小信号物理模型进行了修正，提出了一种新的用于复合沟道HEMT的小信号物理模型，用商用器件模拟软件ISE(integrated systems engineering)对其进行了仿真验证，对比了实测和仿真的I-V特性及转移特性曲线，重点研究了在InGaAs/InP双层沟道中考虑量子效应后的电场和电流密度随着不同栅电压的变化趋势，研究结果表明，由于在沟道中存在量子效应，在栅下靠源端低电场区域，电流主要分布在InGaAs沟道 关键词： 高电子迁移率晶体管 复合沟道 物理模型 磷化铟