The second virial coefficient of 3-centerLennard-Jones molecules and its relation to 1- and 2- center molecules

The second virial coefficients of homonuclear three-centerLennard-Jones molecules are calculated with various parameters of the isosceles triangle connecting the three sites. A special effort is made to establish the reducedBoyle temperaturesT _B and the values of the second virial coefficients atT/T _B=0.3 for the sake of comparison with one- and two-centerLennard-Jones molecules. It is shown that it is possible to find parameter values of the interaction potential of one- and two-centerLennard-Jones molecules which give very similar values of second virial coefficients forT/T _B0.3, and the equivalence conditions are established. These conditions might not only give a basis for a microscopic scaling of state variables, but also some restrictions for the validity of the group contribution concept.Presented in part at the DFG-Colloquium at Paderborn, 19th April 1982, and at the 5th Conference on Mixtures of Nonelectrolytes and Intermolecular Interactions, April 18–22, 1983, at Halle (GDR).     

Hygrometric Determination of Water Activities, Osmotic and Activity Coefficients, and Excess Gibbs Energy of the System MgSO4–K2SO4–H2O

Ternary aqueous solutions of MgSO₄ and K₂SO₄ have been studied by the hygrometric method at 25°C. The relative humidity of this system is measured at total molalities from 0.35 mol-kg^–1 to about saturation for three ionic-strength fractions (y = 0.25, 0.50, and 0.80 of MgSO₄. The data allow calculation of water activities and osmotic coefficients. From these measurements, the Pitzer ionic mixing parameters are determined and used to predict the solute activity coefficients in the mixture. The results are used to calculate the excess Gibbs energy at total molalities for ionic-strength fraction y.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Cathode of a fuel cell with a solid polymer electrolyte: Calculating overall currents in the presence of a gas-diffusion layer

Mathematical apparatus, which makes it possible to perform calculations of the current-voltage characteristics of cathodes of fuel cells with a solid polymer electrolyte in conditions where there are present extraneous diffusion restrictions is proposed. In so doing, the partial pressure of oxygen and the absolute pressure of gas in the gas chamber may assume any values. First of all presented are the results of calculations of the current-voltage characteristics intrinsic to active layers of the air and oxygen cathodes, which are performed under the assumption that the extraneous diffusion restrictions are absent altogether. Thereafter, in the same conditions (at the same parameters that characterize the active layer of a cathode), obtained are results of a calculation of the current-voltage characteristics inherent in the air and oxygen cathodes in the presence of extraneous diffusion restrictions. Afterward there is performed an analysis of the way a gas-diffusion layer restricts the process of generation of current in a cathode and of what measures should be taken in order for the extraneous diffusion restrictions to become less significant.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

Estimation of the lipophilicity of antiarrhythmic and antihypertensive active 1-substituted pyrrolidin-2-one and pyrrolidine derivatives

The lipophilicity of some antiarrhythmic and antihypertensive active 1-[2-hydroxy- or 1-[2-acetoxy-3-(4-aryl-1-piperazinyl)propyl]pyrrolidin-2-one derivatives (1-12) has been investigated. Their lipophilicity (R(MO) and log k') was determined by reversed-phase thin-layer chromatography and reversed-phase high-performance liquid chromatography with mixtures of acetonitrile and Tris buffer as mobile phases. The partition coefficients of compounds 1-12 (log P(ScilogP)) were also calculated with the ScilogP program. Comparison of R(MO), log k' and calculated log D(7.0 ScilogP) values enabled calculation of clog D(7.0 TLC) and clog D(7.0 HPLC) values. Preliminary quantitative structure-activity relationship studies indicated that for active compounds there is a dependence between affinity for alpha(2)-adrenoceptors and their clog D(7.0 HPLC) values.     

A comparative study on textural characterization: cation-exchange and sorption properties of crystalline alpha-zirconium(IV), tin(IV), and titanium(IV) phosphates

Tetravalent metal phosphates (M=Zr, Ti, and Sn) were prepared and characterized by XRD, surface properties, and TG-DTA. The cation exchange and sorption behavior of these metal phosphates toward transition metal ions such as Cu(2+), Co(2+), and Ni(2+) have been studied comparatively as a function of temperature and concentration. The adsorption process was found to increases with increase in temperature and concentration. The selectivity order for alpha-titanium and alpha-tin phosphates is Cu(2+)>Co(2+)>Ni(2+), whereas for alpha-zirconium phosphate it is Cu(2+)>Ni(2+)>Co(2+). The ion exchange capacity of alpha-titanium phosphate is greater than those of other phosphates, which is explained on the basis of the surface behavior, disorderness of the system, degree of hydrolysis of incoming guest adsorbate metal ions, and structural steric hindrance of the exchangers during adsorption and sorption. The distribution coefficient, Gibbs free energy, enthalpy, and entropy values indicate that the ion-exchange processes are spontaneous.     

Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

Estimating the PDMS-Coated, SPME-Fibre/Water- and Fibre/Gas-Partition Coefficients of Chlorinated Ethenes by Headspace-SPME

In this work, a simple, fast and reproducible method is presented for the determination of fibre/liquid-phase and fibre/gas-phase partition coefficients of five chlorinated ethenes on a poly-(dimethylsiloxane), PDMS-coated, solid-phase microextraction fibre, by employing a headspace HS-SPME coupled with gas chromatography. The partition coefficients were estimated by a numerical method using a Level-I fugacity method coupled with parameter-estimation software. Dimensionless partition coefficients between SPME fibre and liquid as well as gas phases were obtained at temperatures of 10 °C, 25 °C and 30 °C. The partition coefficients of the fibre and the gas phase, K _fg, increase with decreasing temperature by a factor of ≈2 to 6, and they are directly proportional to the linear slope of the regression line. The same tendency is observed for the partition coefficient of the fibre and liquid phase, K _fw, in a factor ≈1.2 to 2.0. The sorption enthalpy is higher in the gas phase; therefore, the sorption onto the fibre is favoured at lower temperatures. The correlation of the log K _ow versus log K _fw and log K _oa versus log K _fg shows a linear relationship with the number of chlorine atoms in the C = C molecule. Long-term experiments resulted in sorption to Teflon surfaces and possible losses in 43 mL vials, not observed in 250 mL Boston bottles.     

Selective separation of gold from iron ore samples using ion exchange resin

Gold in iron ore samples is separated from iron (major matrix cation), antimony and vanadium using anion exchange resin in (0.2 M) HBr, potassium peroxodisulfate and acetone:water:nitric acid media. The exchangeable anion Cl⁻ of the ion exchanger Dowex 1X 4 is replaced by Br⁻ using (6 M) HBr solution. Certified reference material DGP-M1, spiked ferric magnetic oxide, gold radioactive tracer ¹⁹⁸Au and gold standard solutions are used to study the adsorption efficiency and the yield recovery of tetrabromoaurate AuBr₄⁻ from the resin. Ten eluents have been tried to elute gold from the column, and it has been found that a 10 ml potassium peroxodisulfate and 240 ml acetone:water:nitric acid [125:5:5] solution fulfills the objective. The set up of the separation procedure allows quantitative adsorption of gold by the resin, while the major matrix cation (Fe) and others (Cd, Ag, Cu, V, Sb, Ti) have been passed through the column with the feeding solution (0.2 M) HBr. The resin selectivity coefficient (K) of separating Au from Fe has been found to be K_Fe^Au≈6.4×10¹¹. The eluted Au is treated with K₂S₂O₈ and H₂O₂ for spectrophotometric determination as rhodamine-B complex at 555.6 nm. The linearity, detection limit, precision, and accuracy of the determination method have been found to be up to 2.0 μg g⁻¹, 0.018 μg g⁻¹, 0.009 μg g⁻¹ and 3%, respectively.