Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Photo-induced evolution of copper sheets from cluster molecules and its application to photolithographic copper patterning

UV photoexcitation of (t-butylethynyl copper)₂₄ cluster films induces segregation of the crystals into metallic and organic phases and leads to evolve the metallic sheets sandwiched by organic polymers. The growth of the metallic crystals in the plane of the photo-electromagnetic field is attributed due to plasmon-plasmon interaction among nanoparticles embedded in dielectric polymer matrices. The surface enhanced photochemical reaction of residual cluster molecules on the photon incident direction is expected to take an important role for joining the metal particles to produce a metallic sheet. We can apply this phenomenon for photolithographic copper pattern generation on a flexible base plate.     

集中荷载下叠合梁抗剪强度

本文对低叠合面钢筋破简支在合梁二阶段受力的斜截面抗剪性能进行了试验研究，并运用非线性有限元分析和试验实测数据，得出了一个适合于集中荷载下高低叠合面叠合梁的抗剪强度计算公式．     

Thermal conductance for single wall carbon nanotubes

We report a theoretical analysis of the phonon thermal conductance, κ(T), for single wall carbon nanotubes (SWCN). In a range of low temperatues up to 100 K, κ(T) of perfect SWCN is found to increase with temperature, approximately, in a parabolic fashion. This is qualitatively consistent with recent experimental measurements where the tube-tube interactions are negligibly weak. When the carbon-carbon bond length is slightly varied, κ(T) is found to be qualitatively unaltered which implies that the anharmonic effect does not change the qualitative behavior of κ(T). Received 12 June 2001     

广义复合隐迭代格式逼近非扩张映像公共不动点

提出并使用如下广义复合隐迭代格式逼近非扩张映像族{Ti}Ni=1公共不动点:{xn=αnxn-1 (1-αn)Tnyn,yn=rnxn snxn-1 tnTnxn wnTnxn-1,rn sn tn wn=1,{αn},{rn},{sn},{tn},{wn}∈[0,1],这里Tn=TnmodN.该文提出的广义复合隐迭代格式包含了目前多种迭代格式,因此,所得强弱收敛定理推广及发展了Mann,Ishikawa,XuandOri,等许多作者的结果.     

Transfer matrix approach of vibration isolation analysis of periodic composite structure

The transmission properties of elastic waves propagating in a three-dimensional composite structure embedded periodically with spherical inclusions are analyzed by the transfer matrix method in this paper. Firstly, the periodic composite structures are divided into many layers, the transfer matrix of monolayer structure is deduced by the wave equations, and the transfer matrix of the entire structure is obtained in the case of boundary conditions of displacement and stress continuity between layers. Then, the effective impedance of the structure is analyzed to calculate its reflectivity and transmissivity of vibration isolation. Finally, numerical simulation is carried out; the experiment results validate the accuracy and feasibility of the method adopted in the paper and some useful conclusions are obtained. Project (No. 50075029) supported by the National Natural Science Foundation of China.     

Thermal and chemical nanofractal relaxation

We studied shape relaxation of nano-fractal islands, during annealing, after their growth from antimony cluster deposition on graphite surface. Annealing at 180^°C shows evidence of an increase of the fractal branch width with time followed by branch fragmentation, without changing the fractal dimension. The time evolution of the width of the arm suggests the surface self-diffusion mechanism as the main relaxation process. With Monte Carlo simulations, we confirmed the observed behavior. Comparison is done with our previous results on fragmentation of nano-fractal silver islands when impurity added to the incident cluster promotes rapid fragmentation by surface self-diffusion enhancement [1].     

A comparative study on the interaction between tin(II) porphyrin and selected group 8B metals for potential application as reduction catalysts

We study the interaction between tin(II) porphyrin (SnPor) with platinum and non-precious Group 8B metals (iron, cobalt and nickel) by density functional theory and discuss the electronic properties of the resulting products. We also model the interaction of the resulting compounds with water where applicable. Our studies indicate that, SnPor-Ni possesses electronic properties similar to SnPor-Pt, suggesting that it may possess similar photocatalytic properties for reduction reactions, such as converting water to hydrogen gas.     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.