Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Synthesis,Optoelectronic and Self‐Assembly Properties of Diazadioxaacene Derivatives

Two novel diazadioxaacene derivatives ( ADOP and ADOQ ) have been successfully synthesized and characterized. Their single crystal analyses disclose that molecule ADOP forms a twisted topology configuration, whereas ADOQ adopts reclining‐chair architecture. Both of them emit strong blue fluorescence in organic solvents. Moreover, they can self‐assemble to form regular nanobelts and nanowires, respectively, via a simple surfactant‐assisted method.     

Vibration of strings with nonlinear supports

The dynamic string motion, which displacement is unilaterally constrained by the rigid termination condition of an arbitrary geometry has been simulated and analyzed. The treble strings of a grand piano usually terminate at a capo bar, which is situated above the strings. The apex of a V-shaped section of the capo bar defines the end of the speaking length of the strings. A numerical calculation based on the traveling wave solution is proposed for modeling the nonlinearity inducing interactions between the vibrating string and the contact condition at the point of string termination. It was shown that the lossless string vibrates in two distinct vibration regimes. In the beginning the string starts to interact in a nonlinear fashion with the rigid terminator, and the resulting string motion is aperiodic. Consequently, the spectrum of the string motion depends on the amplitude of string vibrations, and its spectral structure changes continuously with the passage of time. The duration of that vibration regime depends on the geometry of the terminator. After some time of aperiodic vibration, the string vibrations settle in a periodic regime where the resulting spectrum remains constant.     

Advances in 1,8-Naphthyridines Chemistry

This review reports a broad overview of the synthetic procedures of 1,8-naphthyridines, dibenzo[b,g][1,8]naphthyridine, dibenzo[c,f][1,8]naphthyridine, 1,8-naphthyridine-3-carboxylic acid, 1,8-naphthyridine-3-carboxamide, and 1,8-naphthyridine-3-carbohydrazide compounds and their reactions. The physical properties, spectral data, and biological importance of naphthyridines are discussed.     

Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Physical Dimensions/Units and Universal Constants: Their Invariance in Special and General Relativity

The theory of physical dimensions and units in physics is outlined. This includes a discussion of the universal applicability and superiority of quantity equations. The International System of Units (SI) is one example thereof. By analyzing mechanics and electrodynamics, it naturally leads one, besides the dimensions of length and time, to the fundamental units of action $\mathfrak{h}$, electric charge q, and magnetic flux ?. Also, $q\times ?=\text{action}$ and $q/?=1/\text{resistance}$ are known. These results of classical physics suggests to look into the corresponding quantum aspects of q and ? (and also of $\mathfrak{h}$): The electric charge occurs exclusively in elementary charges e, whereas the magnetic flux can have any value; in specific situations, however, in superconductors of type II at very low temperatures, ? appears quantized in the form of fluxons (Abrikosov vortices). And $\mathfrak{h}$ leads, of course, to the Planck quantum h. Thus, one is directed to superconductivity and, because of the resistance, to the quantum Hall effect. In this way, the Josephson and the quantum Hall effects come into focus quite naturally. One goal is to determine the behavior of the fundamental constants in special and in general relativity.     

1stOpt软件在蔗糖水解实验教学中的应用

将1stOpt软件用于物理化学实验蔗糖水解反应速率常数的测定中，在无需严格记录反应开始时间和测定反应终了旋光度的情况下，通过非线性拟合无需编程及公式变换就可以简单方便准确地得到反应速率常数，避免了传统数据处理方法所带来的人为误差，可以补充和改进物理化学实验的教学。     

基于物理课堂有效教学的策略浅析

根据有效教学的理念提出了课堂有效教学的基本策略、动力策略和长效策略,并结合基础物理的教学,对这些教学策略的科学掌握和运用进行了探讨.     

Rate type constitutive equations for fiber reinforced nonlinearly vicoelastic solids using spectral invariants

In this paper we are interested in developing constitutive equations for fiber-reinforced nonlinearly viscoelastic solids. It has been shown that constitutive equations for such bodies can be expressed in terms of a complete minimal set of 18 classical invariants associated with deformation and fiber orientation. In this paper, we give an alternative formulation using a set of spectral invariants. It is shown via the use of spectral invariants that only 11 of the 18 classical invariants are independent. We analyze the spectral invariants for two illustrative deformation gradients: (i) simple tension, and (ii) simple shear.     

The Effect of Some Physical Factors on the II → I Phase Transition of Isotactic Polybutene-1

Abstract

Isotactic polybutene-1 exhibits excellent physical, mechanical and chemical properties dependent on its most important polymorphic crystal forms, called forms I, II and III. The most stable form, form I, is generated via a slow, solid-state transformation of the tetragonal, kinetically favored form II. The slow transformation rate of form II to I, accompanied by sample shrinkage, attains its maximum at ca 25?°C and takes 7–10?days, which is a technical problem for iPB-1 practical applications. We describe here the results reported in the literature by the authors and others of the effect of various physical factors that affect the transformation rate, with the goal of determining means of accelerating it; it is noted explanations of the effects are limited and in many cases, not given.