Conductivity anomalies in Y–Ba–Cu–O at 40K and 100K under high quasihydrostatic pressures

Electrical resistance measurements at low temperatures and high quasihydrostatic pressures on superconducting and non-superconducting varieties of Y_0.8Ba_1.2Cu₂O₅ (obtained by annealing in oxygen and air respectively) show striking anomalies in the vicinity of 100K and 40K. Arguments are presented to show that these anomalies as also the occurrence of T 's in the oxide superconductors either in the vicinity of 100K or of 40K are connected with their layered structure containing planes of Cu-O otahedral complexes.     

Indications of bulk property changes from surface ion implantation

In the majority of cases, the effects of ion implantation are confined close to the implant zone but, potentially, the resultant distortions and chemical modifications could catalyse relaxations extending into the bulk substrate. Such possibilities are rarely considered but the present data suggest that high dose ion implantation of ZnO has induced bulk changes. Surface implants with Cu and Tb strongly modified the low temperature bulk thermoluminescence properties generated by X-ray irradiation. Suggestions are proposed for the possible mechanisms for bulk relaxations and structural characteristics, which may indicate where such instability may occur in other lattice structures.     

猪肝样品中莱克多巴胺测定的前处理方法

研究猪肝样品中莱克多巴胺测定的样品前处理方法。样品直接用HCl酸解并超声提取,同时添加70%~72%的高浓度HClO_4对酸解样品进行蛋白沉淀,然后经MCX固相萃取柱净化后,用液相色谱-串联质谱法检测。用正交试验考察了酸的种类、浓度、提取时间、提取温度和HClO_4体积对提取效率的影响,最佳条件为:HCl浓度为0.2mol/L,提取时间为40min,提取温度为25℃,HClO_4用量为200μL。从0.5、5.0和10.0μg/kg添加水平检测结果可以看出,方法平均回收率为82.0%~102%,日内和日间精密度4%,符合国家标准对检验方法的要求。该方法灵敏度高,精密度好,成本低,能简便、快速对样品中的莱克多巴胺进行提取,实现对动物源性食品的快速监测。     

Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments,theory and phase field model

Abstract

In this paper, we report the influence of the mode of deformation on recrystallisation kinetics through experiments, theory and a phase field model. Ni samples of 99.6% purity are subjected to torsion and rolling at two equivalent plastic strains and the recrystallisation kinetics and microstructure are compared experimentally. Due to significant differences in the distributions of the nuclei and stored energy for the same equivalent strain, large differences are observed in the recrystallisation kinetics of rolled and torsion-tested samples. Next, a multi-phase field model is developed in order to understand and predict the kinetics and microstructural evolution. The coarse-grained free energy parameters of the phase field model are taken to be a function of the stored energy. In order to account for the observed differences in recrystallisation kinetics, the phase field mobility parameter is a required constitutive input. The mobility is calculated by developing a mean field model of the recrystallisation process assuming that the strain free nuclei grow in a uniform stored energy field. The activation energy calculated from the mobilities obtained from the mean field calculation compares very well with the activation energy obtained from the kinetics of recrystallisation. The recrystallisation kinetics and microstructure as characterised by grain size distribution obtained from the phase field simulations match the experimental results to good accord. The novel combination of experiments, phase field simulations and mean field model facilitates a quantitative prediction of the microstructural evolution and kinetics.     

MgCu metallic glass

We generate an amorphous MgCu model using the rapid solidification of the melt through a first-principles molecular dynamics approach within a generalised gradient approximation and reveal, for the first time, its structural features and mechanical properties in details. The liquid and glassy MgCu are found to acquire slightly distinct local structures. Yet in both forms of MgCu, most Cu atoms have a tendency to form the ideal and defective icosahedrons while Mg atoms are arranged in complex configurations. The mean coordination number of Cu and Mg at 300 K is 11.31 and 13.73, respectively. The short-range order of MgCu glass is projected to be different than the known crystalline MgCu and Mg₂Cu phases. The mechanical properties of MgCu glass and the CsCl-type MgCu crystal are computed and compared. On the basis of the enthalpy analyses, a possible pressure-induced crystallisation of the MgCu glass into a CsCl-type structure is proposed to occur at around 11 GPa.     

Size control of phase‐separated liquid crystal droplets in a polymer matrix based on the phase diagram

When a mixture of liquid crystal (LC) and photo reactive monomer is irradiated by UV light, polymerization occurs and LC droplets form through phase separation, producing polymer dispersed LCs (PDLCs). Although size control of LC droplets and reduced amounts of LC in PDLC films are important in applications, precise size control of LC droplets at a low LC fraction has not yet been accomplished. In this study, the phase diagrams of the LC/initial monomer and the LC/polymer during polymerization were used to control LC droplet size at various LC fractions. Both the relative position of the sample in the initial phase diagram and the shift of the phase separation line during polymerization were shown to be important in determining the size of LC droplets. Our results are expected to provide a new strategy for precise size control of LC droplets especially at a low LC fraction range, which would be a great help for PDLC applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Determination of aminoglycoside residues by liquid chromatography and tandem mass spectrometry in a variety of matrices

A quantitative LC–MS/MS method was developed for the determination of 13 commonly used aminoglycoside antibiotics in meat (pork muscle, fish, and veal livers and kidneys). The proposed method is sufficiently sensitive and highly selective. Unlike other previously reported methods, it uses a simple clean-up procedure based on a strong cation-exchange solid-phase cartridge that permits high sample extract loading volumes. A unique elution regime based on a volatile buffer at intermediately high pH value in combination with an organic solvent provides quantitative elution of the various aminoglycosides. This methodology ensured that neither a breakthrough of weakly retained aminoglycosides (e.g. spectinomycin) nor the incomplete elution of strongly retained analytes (e.g. neo- and gentamycin) is observed. The single-step clean-up is fast and produces clean extracts that minimize matrix-related signal suppression in the electrospray interface.     

A thermodynamic and dynamic subgrid closure model for two‐material cells

A general and robust subgrid closure model for two‐material cells is proposed. The conservative quantities of the entire cell are apportioned between two materials, and then, pressure and velocity are fully or partially equilibrated by modeling subgrid wave interactions. An unconditionally stable and entropy‐satisfying solution of the processes has been successfully found. The solution is valid for arbitrary level of relaxation. The model is numerically designed with care for general materials and is computationally efficient without recourse to subgrid iterations or subcycling in time. The model is implemented and tested in the Lagrange‐remap framework. Two interesting results are observed in 1D tests. First, on the basis of the closure model without any pressure and velocity relaxation, a material interface can be resolved without creating numerical oscillations and/or large nonphysical jumps in the problem of the modified Sod shock tube. Second, the overheating problem seen near the wall surface can be solved by the present entropy‐satisfying closure model. The generality, robustness, and efficiency of the model make it useful in principle in algorithms, such as ALE methods, volume of fluid methods, and even some mixture models, for compressible two‐phase flow computations. Copyright © 2013 John Wiley & Sons, Ltd.     

Inductive effect for the phase stability in hydrogen bonded liquid crystals,x-(p/m)BA:9OBAs

A new series of hydrogen bonded liquid crystal (HBLC) complexes, made up with substituted benzoic acids (BAs) and nonyloxy benzoic acid, viz., x-(p/m)BA:9OBAs are reported for x = F, Cl, Br and –CH₃ substituted at para (p) or meta (m) positions of BA moiety. Proton nuclear magnetic resonance (¹H-NMR) spectrum confirms the HBLC complex. Infra red (IR) spectrum confirms linear, double and complementary type of hydrogen bonding (HB) between x-(p/m)BAs and 9OBA. The liquid crystal (LC) phases are characterised by polarisation optical microscopy (POM) and differential scanning calorimetry (DSC) techniques. x-(p/m)BA:9OBA exhibit N, C and G LC phase variance. HB induces tilted phases and enhances LC phase stability. The influence of configuration, size, electronegativity, electron directing capacity and inductive nature of substituent (x) is investigated for the stability of LC phases. An overview of the LC phase data indicates predominant ‘negative inductive effect’ in HBLCs with electron withdrawing substituents. Inductive effect operates effectively for para substitutions. Results are discussed in the wake of reports in other HBLCs.     

Development and validation of a high‐performance liquid chromatography method for determination of lisinopril in human plasma by magnetic solid‐phase extraction and pre‐column derivatization

A sensitive, reliable and simple HPLC method was developed for the determination of lisinopril in human plasma. The method consists of extraction and clean‐up steps based on magnetic solid‐phase extraction and pre‐column derivatization with a fluorescent reagent. The mobile phase consisted of a mixture of methanol–sodium dihydrogen phosphate (pH 3.0; 0.005 m ; 75:25, v/v). The flow rate was set at 0.7 mL/min. Fluorescence detection was performed at 470nm excitation and 530nm emission wavelengths. Total chromatography run time was 5 min. The average extraction recovery of lisinopril and fluvoxamine (internal standard) was ≥82.8%. The limits of detection and quantification were determined as 1 and 3 ng/mL respectively. The method exhibited a linear calibration line over the concentration range of 3–1000 ng/mL with coefficient of determination (r²) of ≥0.98. The within‐run and between‐run precisions were satisfactory with values of CV of 1.8–12.8% (accuracy from 99.2 to 94.7%) and 2.4–13.7% (accuracy from 99.5 to 92.2%), respectively. These developments led to considerable improvement in method sensitivity and reliability. The method was validated according to the US Food and Drug Administration guidelines. Therefore, it can be considered as a suitable method for determination of lisinopril in plasma samples.