燃料电池用聚合物质子交换膜的研究进展

质子交换膜（PEM）是质子交换膜燃料电池的核心组件之一,具有隔绝阴阳极、提供质子传递通道和阻止燃料渗透的作用. 商业化应用的全氟磺酸PEM存在燃料渗透严重、高温条件下导电性差和成本高的问题,开发性能优良的聚合物PEM显得很有必要. 本文讨论了近年来聚合物PEM的研究进展,分别从聚合物的主链、支链和交联结构角度介绍了分子结构对薄膜相分离、质子导电性、稳定性和电池性能等性能的影响,并讨论了聚合物分子结构设计方面存在的问题,最后对燃料电池用聚合物PEM在未来的发展方向进行了展望.     

Self‐assembly of poly(ionic liquid) functionalized mesoporous magnetic microspheres for the solid‐phase extraction of preservatives from milk samples

In this work, a novel, rapid, and simple analytical method was proposed for the detection of parabens in milk sample by gas chromatography coupled with mass spectrometry. At the same time, milk sample was pretreated by magnetic solid phase extraction, which detected up to five parabens. A series of important parameters of magnetic solid phase extraction were investigated and optimized, such as pH value of loading buffer, amount of material, adsorption time, ionic strength, eluting solvents, and eluting time. Under the optimized conditions, the corresponding values were more than 0.9991, limits of detection and the limit of quantification were 0.1 and 0.5 ng/mL, respectively. In addition, the recoveries were achieved in range of 95–105%, the liner range were within 0.1–600 ng/mL, and the relative standard deviations were even lower than 5%.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Ligandless,deep eutectic solvent‐based ultrasound‐assisted dispersive liquid‐liquid microextraction with solidification of the aqueous phase for preconcentration of lead,cadmium, cobalt and nickel in water samples

A green and efficient sample preparation method using a deep eutectic solvent‐based ultrasounds‐assisted dispersive liquid–liquid microextraction with solidification of the aqueous phase followed by high performance liquid chromatography analysis was developed for preconcentration and determination of heavy metals in environmental samples. In the proposed method, a novel, low density deep eutectic solvent was prepared by mixing trihexyl(tetradecyl)phosphonium chloride and thiosalicylic acid at a molar ratio of 1:2 and used both as an extractant and complexing agent. Ultrasound was used to disperse the extractant in the aqueous phase of the sample. Then, the phases were separated by centrifugation, after which the aqueous phase was frozen and the surface extractant phase was dissolved in a small volume of acetonitrile and subjected to liquid chromatographic analysis. The proposed method provided precisions (relative standard deviation, n = 5) in the range of 2.6–4.7%. The limit of detection were 0.05, 0.13, 0.06, and 0.11 µg/L for Pb(II), Cd(II), Co(II), Ni(II), respectively. The enhancement factors were equal to 154, 159, 162, and 158 for lead(II), cadmium(II), cobalt(II), and nickel(II), respectively. The accuracy of the proposed method was evaluated using certified reference materials (CA011b – hard drinking water, NIST 1643e – trace elements in water, TMRAIN‐04 – simulated rain sample).     

3D Printing in analytical sample preparation

In the last 5 years, additive manufacturing (three‐dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three‐dimensional printing enabled the cost‐effective and rapid fabrication of devices for sample preparation, especially in flow‐based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane‐based three‐dimensional printed separation devices fabricated by print‐pause‐print and multi‐material three‐dimensional printing, or improved three‐dimensional printed holders for solid‐phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three‐dimensional printing of extraction sorbents, the functionalization of commercial three‐dimensional printable resins, or the coating of three‐dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid–liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high‐performance liquid chromatography. The present review outlines the current state‐of‐the‐art of three‐dimensional printing in analytical sample preparation.     

Preparation of magnetic attapulgite/polypyrrole nanocomposites for magnetic effervescence‐assisted dispersive solid‐phase extraction of pyrethroids from honey samples

In this work, a novel extraction technique based on the effervescence‐assisted dispersion and magnetic recovery of attapulgite/polypyrrole sorbents was developed for determining the concentrations of five pyrethroids in honey samples. The magnetic nanoparticles were synthesized by a one‐pot method. Several experimental parameters that affected the extraction efficiency, including the dispersion conditions, pH, ionic strength, and desorption conditions, were investigated. Under optimal conditions, the calibration curves for the five pyrethroids in honey samples exhibited good linearity, with r² values ranging from 0.9979 to 0.9990. The limits of detection varied between 0.21 and 0.34 µg/L. Satisfactory recoveries of 81.42–106.73% with intra‐ and interday relative standard deviations of less than 6.94 and 10.89%, respectively, were obtained. Moreover, the sorbents exhibited acceptable batch‐to‐batch repeatability in the range of 5.06–15.01%, and each sorbent could be reused for up to four extraction cycles without a significant loss in the extraction recovery.     

Mesoporous silica hybridized by ordered mesoporous carbon for in‐tube solid‐phase microextraction

To enhance the extraction performance, a mesoporous silica was modified with ordered mesoporous carbon for solid‐phase microextraction. Three stainless‐steel wires coated with the mesoporous material were placed in a polyetheretherketone tube for getting an extraction tube. The tube was coupled to high‐performance liquid chromatography with diode array detector, and the online analysis system was constructed. Then its extraction performance was evaluated using hydrophobic polycyclic aromatic hydrocarbons, phthalates, and hydrophilic neonicotinoids. The best selectivity was presented for polycyclic aromatic hydrocarbons. Several main conditions were optimized such as sampling volume, sampling rate, methanol concentration in the sample, and desorption time, a rapid and sensitive analytical method was established toward polycyclic aromatic hydrocarbons. The analytical method exhibited wide linear range from 0.017 to 15 µg/L with acceptable correlation coefficients more than 0.9990, limits of detection in 0.005‐0.020 µg/L, limits of quantification ranging from 0.017 to 0.066 µg/L as well as large enrichment factors of 377‐2314. It was successfully applied to detect trace polycyclic aromatic hydrocarbons in some real water samples including tap water, snow water, and domestic sewage.     

微量元素与糖尿病

糖尿病是一种常见病。成人糖尿病患病率约为３％,亦即现有糖尿病人达１亿左右。估计到２０１０年,全球糖尿病人将超过２亿。糖尿病的发展涉及多种病理过程,已有令人信服的证据表明,微量元素在胰岛素的生成和作用以及糖尿病人的能量底物代谢中起着极为重要的作用。本文从糖尿病行病学、微量元素在胰岛素代谢中的作用、糖尿病人的微量元素含量变化和糖尿病的微量元素治疗等四个方面综述了微量元素与糖尿病的关系。参考文献７０,表     

温控相转移催化——水/有机两相催化新进展

综述了“温控相转移催化”的原理,温控膦配体的设计、合成及其在水溶性极小的底物高碳烯烃的水/有机两相氢甲酰化反应中的应用效果.     

颗粒流体两相流模型研究进展

本文介绍了颗粒流体两相流动的特征及其模拟方法, 重点论述了拟流体模型的研究现状及发展, 并对两相流动模拟中的各种方法进行了展望。