Global hysteresis in ferroelectrics with incommensurate phases

A review of the basic experimental results connected with the formation of long-living metastable states in the incommensurate phases of ferroelectric crystals and related phenomena is given. The interpretation and appropriate physical mechanisms underlying the global hysteresis phenomena associated with these states are considered.     

Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity

The properties and behaviour of an α−β colony Ti-6242 alloy have been investigated at 20 °C utilising coupled micro-pillar stress relaxation tests and computational crystal plasticity. The β-phase slip strength and intrinsic slip system strain rate sensitivity have been determined, and the β-phase shown to have stronger rate sensitivity than that for the α phase. Close agreement of experimental observations and crystal plasticity predictions of micro-pillar elastic-plastic response, stress relaxation, slip activation in both α and β-phases, and strain localisation within the α−β pillars with differing test strain rate, β morphology, and crystal orientations is achieved, supporting the validity of the properties extracted. The β-lath thickness is found to affect slip transfer across the α−β−α colony, but not to significantly change the nature of the slip localisation when compared to pure α-phase pillars with the same crystallographic orientation. These results are considered in relation to rate-dependent deformation, such as dwell fatigue, in complex multiphase titanium alloys.     

Movement and amplification of exciton condensed phase pulses and interaction between pulses in semiconductor quantum wells

Formation and movement of an exciton pulse in an inhomogeneous potential are studied. It is shown that the pulse does not blur and the maximum of the exciton density in the pulse remains constant during the exciton lifetime if the pulse is formed from the condensed phase. The path, traversed by the excitons, can be increased by imposing an additional laser pulse on the system. Thereby, such a system can be used for information transmission over the exciton condensed phase.     

The effect of noise on the dirac phase of electron in the presence of screw dislocation

The effect of noise on the Dirac phase of electron in the presence of screw dislocation is studied. An uncorrelated noise, which coincides with the nature of thermal fluctuations, is adopted. Results indicate that the Dirac phase is robust against the existing noise in the system.     

Chemotherapy control by breath profile with application of SPME‐GC/MS method

Chemotherapy used as a treatment against lung cancer has influence on metabolic processes occurring in healthy cells. The changes of biochemical pathways proceeded inside cells might be observed in expired air. In the experiment, breath analysis was carried out before and after anticancer therapy. Expired air samples were collected from 22 patients with a biopsy confirmed lung cancer. Volatile organic compounds present in breath were analyzed by gas chromatography/mass spectrometry. For enrichment of analytes solid‐phase microextraction technique was applied. Eight fibers covered by different sorbents were tested. Carboxen‐polydimethylsiloxane fiber revealed the highest extraction efficiency in relation to analytes in breath. The data showed that cytostatic drugs increase the concentration of acetone and isoprene in the breath collected after chemotherapy. Volatile metabolites of administrated drugs were not identified in expired air.     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

The thermoelectric working fluid: Thermodynamics and transport

Thermoelectric devices are heat engines, which operate as generators or refrigerators using the conduction electrons as a working fluid. The thermoelectric heat-to-work conversion efficiency has always been typically quite low, but much effort continues to be devoted to the design of new materials boasting improved transport properties that would make them of the electron crystal–phonon glass type of systems. On the other hand, there are comparatively few studies where a proper thermodynamic treatment of the electronic working fluid is proposed. The present article aims at contributing to bridge this gap by addressing both the thermodynamic and transport properties of the thermoelectric working fluid covering a variety of models, including interacting systems.