变形双重介质分形油藏非达西流动分析

考虑与实际生产相符的介质的双重特性和分形特征,并考虑介质的变形,引入双重分形介质渗透率模数,建立应力敏感地层双重分形介质系统的流动方程.采用Douglas-Jones预估-校正法获得无限大地层定产量生产时变形双重分形介质模型的数值解和无限大地层定压生产时分形介质双孔模型的数值解,作出了典型的压力曲线图版.     

High diffusion barrier and piezoelectric nanocomposites based on polyvinylidene fluoride‐trifluoroethylene copolymer and hydrophobized clay

Nanocomposites based on polyvinylidene fluoride–trifluoroethylene copolymer and up to 4 vol % of hydrophobized clay nanoparticles are investigated. The structure, piezoelectric properties, and oxygen permeability of solvent cast films are analyzed before and after annealing above the Curie temperature of the polymer. Exfoliation of the clay takes place at concentrations up to 1 vol %, beyond which it rapidly drops and is absent at a concentration of 4 vol %. The presence of clay does not change the crystallinity of the polymer, but leads to a threefold decrease of the oxygen permeability at a concentration of 0.5 vol %. Annealing at 130 °C increases the crystallinity, the proportion of β phase up to 94%, and the piezoelectric coefficient by 20–40% at clay fractions below 1 vol %. Annealing also leads to a remarkable 3‐ to 10‐fold decrease of O₂ permeability and to intriguing changes of the activation energy for O₂ transport, which decreases from 56 kJ/mol for the as‐cast polymer to below 10 kJ/mol for the polymer and exfoliated composite. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1828–1836     

Triple negative permeability band in plasmon-hybridized cut-wire-pair metamaterials

We expand the picture of plasmon hybridization in metamagnetic structure via numerically studying the electromagnetic coupling in the metallic cut-wire-pair super cells. It is shown that a triple negative permeability band can be achieved by systematically controlling the plasmon hybridization in such the structure. The corresponding transmission properties as well as the electromagnetic responses of the plasmon-hybridized structures were presented by using the finite integration technique simulations. Our results would reveal a promising design to obtain the multiple negative refractions based on the combination of hybridized cut-wire-pairs and continuous wires.     

色散磁导率对异向介质中的调制不稳定性的影响

基于Drude模型研究了异向介质的色散磁导率对调制不稳定性的影响. 结果表明，在反常色散情形，赝五阶非线性在异向介质的负折射区中增大了调制频谱的范围及增益值，这与常规正折射介质中出现的现象正好相反；自陡峭效应在异向介质中有可能为负值，但无论正负，也无论在正折射区还是负折射区，它都抑制调制不稳定性的产生；二阶非线性色散效应在正、负折射区中分别促进和抑制调制不稳定性的产生. 在正常色散情形，由于二阶非线性色散效应的作用，使本来在常规正折射介质中不可能出现的调制不稳定性现象也能出现，这一特性为在正常色散区形成孤     

Weighted Caccioppoli-type estimates and weak reverse Hölder inequalities for -harmonic tensors

We obtain a local weighted Caccioppoli-type estimate and prove the weighted version of the weak reverse Hölder inequality for -harmonic tensors.

     

Fe39.4－xCo40Si9B9Nb2.6Cux纳米晶合金的有效磁各向异性研究

采用多晶材料趋近饱和定律研究了非晶Fe_39.4-xCo₄₀Si₉B₉Nb_2.6Cu_x(x=0.5,1,1.5) 合金在不同温度纳米晶化后的有效磁各向异性常数〈K〉.结果表明， Cu含量较低(x=0.5)时，纳米晶粒较大并且在较低的退火温度(550℃)下析出硬磁相，〈K〉随退火温度T_a升高显著增加；随着Cu含量的增加，有效地细化了晶粒，并且抑制了硼化物的析出，〈K〉明显减小.讨论了〈K〉与晶粒尺寸D及初始磁导率的关系. 关键词： 纳米晶 有效磁各向异性 磁导率 FeCo基合金     

Effects of composition and sintering temperature on properties of NiZn and NiCuZn ferrites

Effects of composition and sintering temperature on grain size, porosity and magnetic properties of the NiZn and NiCuZn ferrites were investigated. It was found that the lowest power loss could be obtained with the equimolar composition for both NiZn and NiCuZn ferrites, which could be attributed to the lowest porosity. A slight deficiency or excess of Fe₂O₃ content had no pronounced influence on saturation magnetic flux density (B_s) in our testing range. However, a slight excess of Fe₂O₃ was effective to improve the initial permeability, which could be attributed to decrease of the magnetocrystalline anisotropy. With the increase of sintering temperature, the initial permeability and power loss of the NiZn and NiCuZn ferrites had different development trend, which could be explained by the different variation trend of the grain size and porosity. Power losses of the NiCuZn ferrite samples were lower than that of the NiZn ferrite samples at any sintering temperature. Synthetically, the NiCuZn ferrites had a better performance than the NiZn ferrites in power field use.     

Confined crystallization of PVDF and a PVDF‐TFE copolymer in nanolayered films

Layer‐multiplying coextrusion was used in conjunction with isothermal recrystallization to study the confined crystallization of polyvinylidene fluoride (PVDF) and polyvinylidene fluoride‐tetrafluoroethylene (PVDF‐TFE) using polycarbonate (PC) and polysulfone (PSF) as confining materials. Three layered systems were produced (PC/PVDF, PSF/PVDF, and PC/PVDF‐TFE) with layer thicknesses ranging from 525 to 28 nm. The crystal morphology was affected by both layer thickness and recrystallization temperature. Specifically, increased recrystallization temperature and decreased layer thickness facilitated the formation of high aspect ratio in‐plane crystals in both PVDF based polymers. On the other side of the spectrum, thicker layers and lower recrystallization temperatures produced on‐edge PVDF crystals and isotropic PVDF‐TFE crystals. The morphology was correlated with oxygen permeability, which decreased by almost two orders of magnitude compared with the bulk. A variety of crystal structures were obtained and explained with nucleation and diffusion theory. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011