双核钯配合物［Ph_2P（o－C_6H_4CO）PdCl］_2·2CH_2Cl_

合成了双氯桥双核钯配合物［Ｐｈ_２Ｐ（ｏ－Ｃ_６Ｈ_４ＣＯ）ＰｄＣｌ］_２·２ＣＨ_２Ｃｌ_２进行了元素分析、红外光谱表征和晶体结构测定，研究了其催化氢化性能。在３０～８０℃、氢分压１．０～５．０ＭＰａ的范围内。发现该配合物是催化氢化丙烯酸为丙酸的有效催化剂．晶体［Ｐｄ_２Ｃｌ_２（Ｃ_（１９）Ｈ_（１４）ＯＰ）_２］·２ＣＨ_２Ｃｌ_２属Ｐ１空间群，ａ＝０．９３０４（３）ｎｍ，ｂ＝１．０３９２（２）ｎｍ，ｃ＝１．１０６２（３）ｎｍ；ａ＝１０２．７８（２），Ｂ＝９７．３５（３），γ＝９５．２５（２），Ｖ＝１．０２６４ｎｍ~３，Ｍ＝１０３２．１７，２＝１，Ｄｃ＝１．６７０ｇ／ｃｍ~３，ｕ＝１３．６９５ｃｍ~（－１），Ｆ（０００）＝５１２，用１９４５个独立衍射精修结构，最终Ｒ＝０．０３６。     

一个新颖的三维异核锑(III)-镨(III)配合物[Sb2-μ4-(EDTA)2Pr(H2O)5]NO3•4H2O的合成、晶体结构及热分解研究

合成了锑-镨与乙二胺四乙酸形成的新颖三维配合物[Sb₂-μ₄-(EDTA)₂Pr(H₂O)₅]NO₃•4H₂O, 用元素分析、红外光谱、热分析及X射线单晶衍射法等进行了组成和结构表征. 结果表明该配合物属正交晶系, 空间群Pnn2; 晶胞参数: a＝1.07031(2) nm, b＝2.30805(4) nm, c＝0.72343(2) nm, V＝1.78711(7) nm³, Z＝2, D_c＝2.202 g/cm³, F(000)＝1164, μ＝2.955 mm^－1, GOF＝1.000, 最终偏离因子R₁＝0.0203, wR₂＝0.0545 [I＞2σ(I)]. 在标题化合物中, 每个镨(III)离子的配位数为9, 与五个水分子中的五个氧原子和四个羧基氧原子配位, 形成三帽三角棱柱空间配位多面体. 锑(III)与EDTA离子中的四个氧原子和两个氮原子配位, 在赤道平面上有一孤对电子. 同时讨论了配合物的热分解过程.     

α-单取代环十二酮肟及缩氨基硫脲的合成及晶体结构

单晶X射线衍射分析表明, α-单取代环十二酮与氨衍生物羟胺和氨基硫脲发生缩合反应得到两种母体构象均为[3333], 而取代基为边外向或角反向的α-单取代环十二酮肟或缩氨基硫脲. 利用底物的“角位羰基参与反应”原理, “记忆效应”及进攻试剂与底物是否形成氢键解释了这一实验结果. 通常情况下, 试剂从空间障碍小的一面进攻羰基而生成α-角反取代环十二酮肟或缩氨基硫脲. 当试剂与底物的取代基之间能够形成分子间氢键时, 则生成α-边外取代环十二酮肟或缩氨基硫脲.     

Study on the nature of interaction of BrCl with HF,H2O,and NH3

By counterpoise‐corrected optimization method, the interactions of BrCl with the first‐row hydrides (HF, H₂O, NH₃) have been investigated at the MP2/6–311++G(3d,3p) level. To understand that the X? Br‐type (X = F, O, N) structure is more stable than the corresponding hydrogen‐bonded structure in these complexes, the electronic properties were also investigated. Symmetry‐adapted perturbation theory (SAPT) analysis has been carried out to understand the nature of the weak hydrogen bond and X? Br‐type interactions. On the other hand, for the weak hydrogen‐bonded complexes and the X? Br‐type complexes charges transfer is well correlated with the total induction energies. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

氢气对氯硅烷功能化非共轭α,ω-双烯烃和丙烯共聚物链结构的影响

基于Ziegler-Natta催化剂的氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚,在水的引发下脱水缩合可有效地形成长支链结构的聚丙烯树脂.而氢气常作为丙烯聚合中的链转移剂,调控聚丙烯的分子量,基于此,研究了氢气对氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚物链结构的影响.核磁共振氢谱(~1H-NMR)测试结果表明,氢气抑制了氯硅烷功能化非共轭α,ω-双烯烃的插入,随着氢气用量的增加,共聚物分子链中端基乙烯基含量由0.12 mol%降低到0.05 mol%.熔体流变行为测试结果显示,聚合物熔体的储能模量、损耗模量和零剪切黏度均随着氢气用量增加而降低,这主要是由于相对分子质量减小和长支链密度的减少.     

2,3-二取代-4-(IH-l,2,4-三唑-l-基)-5-苯基氢基噻吩的合成及生物活性研究

合成了九个以噻吩为母体环的含三唑环的化合物——2，3-二取代-4-(1H-1， 2，4．三唑-1-基)-5-苯基氨基噻吩(2a-2i)，并测定了2a的晶体结构．晶体为三斜 晶系，P-1空间群，晶胞参数为：a=0．79816(15)nm，b=1．00259(13)nm，c=1． 4478(4)nm，a=100．326(16)°，β=94．69(2)°，r=106．083(9)°，V=1．0845 (4)nm～3，z=2，D_c=1．396 g／cm～3．初步生物活性表明所有目标化合物杀菌活 性较低，有一定的植物生长调节活性．     

Ruthenium cluster compounds containing 1,1′-bis(diphenylphosphino)ferrocene (dppf): an electrochemical analysis and the crystal structure of [Ru3(CO)11]2(μ-dppf)

The electrochemistry of 1,1′-bis(diphenylphosphino)ferrocene (dppf) derivatives of Ru₃(CO)₁₂ was investigated. Two known compounds [Ru₃(CO)₈(μ-dppf)₂ (1) and Ru₃(CO)₁₀dppf (2)] and a new compound [Ru₃(CO)₁₁(μ-dppf)Ru₃(CO)₁₁ (3)] were prepared. Compound 3 was characterized spectroscopically and an X-ray crystal structure was obtained. The reductive electrochemistry of 1 and 2 showed an irreversible reduction and a follow-up oxidation, similar to Ru₃(CO)₁₂. The electrochemistry of compound 3 showed two irreversible waves and a follow-up oxidation. A trend in the reduction potential vs. the number of coordinated phosphorus atoms was noted. The oxidative electrochemistry of 1-3 showed a dppf-based chemically reversible wave, and an irreversible wave similar to that of Ru₃(CO)₁₂. Trends were also noted between the oxidation potential and the number of coordinated phosphorus atoms.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Synthesis and Crystal Structure of an (N-Protected amino)-β-lactam Derivative of 1,5-Benzothiazepine

1 INTRODUCTION 1,5-Benzothiazepines are a kind of compounds which have important biological activitives[1, 2]. Cycloaddition reactions of their active C=N bond with ketene permit the construction of new -lactam ring. The -lactam moiety is the main part of the antibiotics such as penicillins. So the product of this reaction possesses two active centers and can be beneficial to pharmaceutical research. In this paper we have achieved the asymmetric ketene-imine cycloadditions employing the…     

Hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s: swelling behavior and water states

Hemocompatibility is an essential aspect of blood contacting polymers. Knowledge of the relationship between polymer structure and hemocompatibility is important in designing such polymers. In this work, the effect of swelling behavior and states of water on the hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP) films was studied. Platelet adhesion and plasma recalcification time tests were used to evaluate the hemocompatibility of the films. Considering the importance of surface properties on the hemocompatibility of polymers, static water contact angles were measured by both sessile drop and captive bubble methods. It was found that, on the film surface of PANCNVP with a higher NVP content, adhered platelets were remarkably suppressed and the recalcification time was longer. The total water content adsorbed on the PANCNVP film was determined through swelling experiments performed at temperatures of interest. Differential scanning calorimetry and thermogravimetric analysis were used to probe the states of water in the films. Based on the results from these experiments, it was hypothesized that the better hemocompatibility of PANCNVP films with higher NVP contents was due to their higher free water content, because water molecule exchange at the polymer/liquid interface, facilitated by a high free water content, is unfavorable for the formation of surface bound water, which causes poor hemocompatibility. [diagram in text].