应变对层状锰系锂离子电池正极材料输出电压的影响

利用第一性原理方法系统研究了不同应 变模式对LiMnO₂和Li₂MnO₃输出电压的影响, 建立了输出电压与弹性常数及应变之间的关系. 发现所有应变对输出电压都是降低的, 且应变效应是各向异性的. 大部分的单轴应变5%时对输出电压的降低都小于0.1 V. 由于层状的电极材料层间的键合作用较弱, 且受脱锂后形成的锂空位影响较大, 当从锂层脱出锂时, 垂直于层方向的应变对输出电压影响较大; 而对Li₂MnO₃系统从过渡金属层中脱锂时, 平行于层的应变对输出电压影响更大. Li₂MnO₃骨架支撑的层状固溶体系中, 应变使高电压充电阶段的电压维持在截断电压之下, 并打开过渡金属层中锂的迁移通道, 产生较为持久的充电而可能获得较大的充电容量.     

一种高灵敏度的桥型声表面波应变传感器

为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器.首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系.根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比...     

Endogenous Nanoparticles Strain Perovskite Host Lattice Providing Oxygen Capacity and Driving Oxygen Exchange and CH4 Conversion to Syngas

Particles dispersed on the surface of oxide supports have enabled a wealth of applications in electrocatalysis, photocatalysis, and heterogeneous catalysis. Dispersing nanoparticles within the bulk of oxides is, however, synthetically much more challenging and therefore less explored, but could open new dimensions to control material properties analogous to substitutional doping of ions in crystal lattices. Here we demonstrate such a concept allowing extensive, controlled growth of metallic nanoparticles, at nanoscale proximity, within a perovskite oxide lattice as well as on its surface. By employing operando techniques, we show that in the emergent nanostructure, the endogenous nanoparticles and the perovskite lattice become reciprocally strained and seamlessly connected, enabling enhanced oxygen exchange. Additionally, even deeply embedded nanoparticles can reversibly exchange oxygen with a methane stream, driving its redox conversion to syngas with remarkable selectivity and long term cyclability while surface particles are present. These results not only exemplify the means to create extensive, self‐strained nanoarchitectures with enhanced oxygen transport and storage capabilities, but also demonstrate that deeply submerged, redox‐active nanoparticles could be entirely accessible to reaction environments, driving redox transformations and thus offering intriguing new alternatives to design materials underpinning several energy conversion technologies.     

Interfacial Strain Release from the WS2/CsPbBr3 van der Waals Heterostructure for 1.7 V Voltage All-Inorganic Perovskite Solar Cells

Perovskite lattice distortion induced by residual tensile strain from the thermal expansion mismatch between the electron-transporting layer (ETL) and perovskite film causes a sluggish charge extraction and transfer dynamics in all-inorganic CsPbBr₃ perovskite solar cells (PSCs) because of their higher crystallization temperatures and thermal expansion coefficients. Herein, the interfacial strain is released by fabricating a WS₂/CsPbBr₃ van der Waals heterostructure owing to their matched crystal lattice structure and the atomically smooth dangling bond-free surface to act as a lubricant between ETL and CsPbBr₃ perovskite. Arising from the strain-released interface and condensed perovskite lattice, the best device achieves an efficiency of 10.65 % with an ultrahigh open-circuit voltage of 1.70 V and significantly improved stability under persistent light irradiation and humidity (80 %) attack over 120 days.     

一种基于光谱分析的二元不完全重叠色谱峰的分离解析方法

基于二极管阵列检测器获得的色谱-光谱数据,建立了一种二元不完全重叠液相色谱峰的解析方法: 色谱数据经过去噪、归一化处理后,计算各时间点的光谱差异并进行系统聚类分析,提取特征光谱后,利用非负最小二乘法对色谱-光谱矩阵进行解析,得到基于特征光谱的流出曲线,进而得到分离后的色谱峰。将解析结果和纯标样的色谱峰进行比较,解析后的光谱图和纯标样的光谱图无显著差异,保留时间相差小于0.01 min。实验结果表明,该方法在二元不完全重叠液相色谱峰的解析方面能取得良好的效果。     

Error estimation in peak‐shape analysis of XPS core‐level spectra using UNIFIT 2003: how significant are the results of peak fits?

An error analysis for numerically evaluating random uncertainties in x‐ray photoelectron spectroscopy has been implemented in version 2003 of the spectra treatment and analysis software UNIFIT in order to improve the understanding of the statistical basis and the reliability of the model parameters for photoelectron spectra. The theoretical basis as well as two approaches to obtain error limits of the fit parameters have been considered. Several test spectra have been analysed and discussed. A representative example has been chosen to demonstrate the relevance of the error estimation for practical surface analysis. Suggestions for the minimization of errors in the peak‐fitting procedures are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

Ring strain energies: substituted rings, norbornanes, norbornenes and norbornadienes

Ring strain energies (RSEs) are predicted using homodesmotic reactions at the B3LYP/6-31G^* level of theory. Substituents are conserved in the acyclic reference and any difference in energy between the ring and the acyclic reference corresponds exclusively to RSE. Small rings are stabilized by alkyl substituents and this stabilization decreases as the size of the ring increases. There is a destabilization of medium sized rings. Greater stabilization is found upon alkyl substitution at a double bond in an unsaturated ring and this stabilization decreases as ring size increases. The effects of cis-1,2-disubstitution on RSEs have been evaluated and indicate stabilization for both small and medium sized rings. RSEs of saturated and unsaturated polycyclic systems agree well with the RSEs derived from experimental thermochemical data. RSEs are reported for substituted norbornanes, norbornenes, and norbornadienes to complement experimental studies.     

Effect of the comonomer content on the mechanical parameters and microhardness values in poly(ethylene‐co‐1‐octadecene) synthesized by a metallocene catalyst

Stress–strain and microhardness measurements were carried out on a series of copolymers of ethylene and 1‐octadecene with different comonomer contents in the corresponding homopolymer of ethylene, synthesized with a metallocene catalyst. The different mechanical properties, deduced from the stress–strain curves (Young's modulus, yield stress, deformation at break, and energy to break) are interpreted in terms of the crystallinity and molecular weight of the samples because these two characteristics show considerable variations with the comonomer content. The microhardness values are explained in terms of these properties, and they are also correlated with Young's moduli and yield stresses deduced from the stress–strain curves. Linear relations are found between microhardness and yield stress and between the logarithm of the microhardness and the logarithm of the elastic modulus. The properties deduced from these lines are compared with literature values. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 277–285, 2001     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Coordinatively Unsaturated Amidotitanocene Cations with Inverted σ and π Bond Strengths: Controlled Release of Aminyl Radicals and Hydrogenation/Dehydrogenation Catalysis

Cationic amidotitanocene complexes [Cp₂Ti(NPhAr)][B(C₆F₅)₄] (Cp=η⁵-C₅H₅; Ar=phenyl ( 1 a ), p-tolyl ( 1 b ), p-anisyl ( 1 c )) were isolated. The bonding situation was studied by DFT (Density Functional Theory) using EDA-NOCV (Energy Decomposition Analysis with Natural Orbitals for Chemical Valence). The polar Ti−N bond in 1 a–c features an unusual inversion of σ and π bond strengths responsible for the balance between stability and reactivity in these coordinatively unsaturated species. In solution, 1 a–c undergo photolytic Ti−N cleavage to release Ti(III) species and aminyl radicals ⋅ NPhAr. Reaction of 1 b with H₃BNHMe₂ results in fast homolytic Ti−N cleavage to give [Cp₂Ti(H₃BNHMe₂)][B(C₆F₅)₄] ( 3 ). 1 a–c are highly active precatalysts in olefin hydrogenation and silanes/amines cross-dehydrogenative coupling, whilst 3 efficiently catalyzes amine-borane dehydrogenation. The mechanism of olefin hydrogenation was studied by DFT and the cooperative H₂ activation key step was disclosed using the Activation Strain Model (ASM).