Triple differential cross sections for ionization of hydrogen atoms by positrons in a Schwinger variational calculation

Schwinger variational principle has been used to calculate triple differential cross-sections for ionization of hydrogen atoms by positrons at intermediate and high energies for Ehrhardt type asymmetric geometry. The results agree in general with the calculations of Brauneret al [8] and with the second Born calculation.     

Analysis of nonlinear sliding structures by modified stochastic linearization methods

Probabilistic characteristics of a sliding structure is investigated by using new versions of stochastic linearization technique. The structure is composed of base part and upper part, which are connected to each other in a spring-damping system. Coulomb friction between the base structure and earth ground is considered. Two alternative versions of stochastic linearization approach, suggested by X. Zhang and I. Elishakoff, respectively, are applied to such a sliding structure to evaluate its statistical properties. Compared with the results of Monte Carlo simulation, the two new approaches are performing much better than the conventional one in their applications to the sliding structure. Moreover, numerical results indicate that the criterion proposed by Elishakoff turns out to be superior to all other versions in the problem under study. Numerical results also suggest that the entire structure may be replaced by the rigid body in the sliding problem as long as the difference of velocity responses are considered less important than those of displacement responses.     

A method for determining optical constants, dimensions, and concentrations of “soft” absorbing particles in the brightening band region

We investigate the possibilities of creating a method for estimating the optical constants, dimensions, and concentrations of “soft” absorbing particles by applying a theoretical analysis of the angular dependence of the intergrated indicatrix, overall characteristics of light scattering, and absorption on the phase shift and diffraction parameter of particles in the brightening band region. We show that using the investigated optical characteristics, it is possible to determine the unknown parameters of a suspension from experimental data. Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, Akademgorodok, Krasnoyarsk, 660036, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 807–812, November–December, 1997.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

一维接触过程的光滑性与稳定性

本文证明了一维接触过程在适当的小扰动下，其极点平稳分布除在临界点λ＿ｃ处外总是光滑的．特别，一维接触过程本身的极点平稳分布关于其参数除在临界点处外总是光滑的．     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

氢氧化铝镁正电溶胶制备及性能研究

氢氧化铝镁正电溶胶制备及性能研究侯万国，张春光，孙德军，梁晓丽，王果庭（山东大学胶体与界面化学研究所，济南，２５０１００）关键词混合金属氢氧化物，溶胶，超细颗粒混合金属氢氧化物的合成、组成及结构等已得到广泛研究［１，２］．我们也曾用插入法合成了混合金...     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

流通池介质交换差示脉冲阳极溶出伏安法用于多元素重叠峰的分离及其同时测定

本文用流通池介质交换差示脉冲阳极溶出伏安法在盐酸介质中富集,而以碳酸钠-碳酸氢钠缓冲溶液为溶出介质,有效地分离了酸性介质中Cu(Ⅱ)、Sb(Ⅲ)、Pb(Ⅱ)、Tl(Ⅰ)、Cd(Ⅱ)、In(Ⅲ)的重叠溶出峰,实现了多离子的同时测定。