Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.     

Depth profiling by means of sims: Recent progress and current problems

The present state of the art of secondary ion mass spectrometry (SIMS), applied to the in-depth analysis of impurity concentration profiles, is reviewed critically. It is shown that SIMS has reached a level of perfection which is unparalleled by other analytical techniques. There are, however, several effects which may cause deviations of the measured profile from the original dopant distribution. These detrimental effects are due to interaction of primary ions with the residual gas, adsorption and incorporation of residual gases, sputtering yield variations due to the accumulation of probe atoms in the sample, mass interference between molecular ions and the atomic species under study and, last but not least, beam-induced relocation of dopant atoms (“atomic mixing”). Methods for minimizing the respective disturbing effect are discussed.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

单光束互相关法测量高浓度纳米颗粒粒径

针对光子相关光谱法不能测量高浓度纳米颗粒粒径和双光束互相关测量法装置结构过于复杂等问题,提出了一种基于范西特-泽尼克定理的单光束互相关法。首先分析了传统双光束互相关法存在的问题,然后根据范西特-泽尼克定理建立了单光束互相关测量法的模型,设计完成了单光束互相关颗粒粒度测量装置,最后对各种浓度不同粒径的颗粒进行了测量。实验证明,单光束互相关法能有效抑制多重散射的影响,适用于测量高浓度纳米颗粒粒径。     

μ子寿命测量实验

根据粒子的平均寿命测量原理,采用大面积塑料闪烁探测器和可编程逻辑器件设计了宇宙线μ子寿命测量的实验教学装置,使用该装置可实现对宇宙μ子寿命的直接测量.通过该实验,可使学生对高能物理理论、高能粒子探测器、高能粒子探测技术和数据获取、处理有整体的理解和认识.本文从实验教学内容和教学方法上对μ子寿命测量实验进行了探讨.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

Block copolymer morphologies confined by square-shaped particle:Hard and soft confinement

The self-assembly of diblock copolymers confined around one square-shaped particle is studied systematically within two-dimensional self-consistent field theory(SCFT).In this model,we assume that the thin block copolymer film is confined in the vicinity of a square-shaped particle by a homopolymer melt,which is equivalent to the poor solvents.Multiple sequences of square-shaped particle-induced copolymer aggregates with different shapes and self-assembled internal morphologies are predicted as functions of the particle size,the structural portion of the copolymer,and the volume fraction of the copolymer.A rich variety of aggregates are found with complex internal self-assembled morphologies including complex structures of the vesicle,with one or several inverted micelle surrounded by the outer monolayer with the particle confined in the core.These results demonstrate that the assemblies of diblock copolymers formed around the square-shaped particle in poor solvents are of immediate interest to the assembly of copolymer and the morphology of biomembrane in the confined environment,as well as to the transitions of vesicles to micelles.     

利用电磁法研究HMX与TATB混合钝感炸药的冲击起爆特性

为研究含有少量奥克托金(HMX)且以三氨基三硝基苯(TATB)为基的高能钝感炸药PBX-3的冲击起爆反应增长规律,采用火炮驱动蓝宝石飞片的方法和铝基组合式电磁粒子速度计技术进行了一维平面冲击实验。通过实验测量撞击表面及内部不同深度处的冲击波后粒子速度,得到PBX-3炸药的Hugoniot关系。根据冲击波示踪器所测数据绘制了炸药到爆轰的时间-距离(x-t)图,获得了反映炸药冲击起爆性能的Pop关系。将入射压力为12.964 GPa时达到爆轰的6条速度曲线修整成相同零点,通过读取6条曲线的分离点即反应区末端的C-J点,计算出化学反应区时间和宽度。     

Characterization of SiC and Si<Subscript>3</Subscript>N<Subscript>4</Subscript> nanoparticles and their aqueous dispersions

Nanoparticles of SiC and Si₃N₄ were previously used to obtain electroless NiP/particles nanocomposites. The incorporation process was very different, depending on the particle: SiC tended to agglomerate and had a high incorporation level; Si₃N₄ particles were not aggregated, but their incorporation level was very low. To try to explain these differences, the particles and their aqueous dispersions were characterized. Although the as-received products were both oxidized and of the identical mean size, results showed that the size distributions and the surface oxidation products were rather different. The zeta potential in water dispersions was similar and negative for both particles but, as the electrolyte ions were introduced, it showed a different evolution: nitride particles retained a small negative charge and carbide was almost uncharged. The overall results obtained in this study explain the different behavior of both ceramic particles and provide possible solutions to improve their co-deposition with nickel.     

Research activities at the PALS research infrastructure

The Prague Asterix Laser System (PALS) Research Infrastructure (RI) in Prague, one of only four kJ-class laser facilities in EU, has been offering its beam time to European researchers for already 14 years, since 2004 in the framework of the LASERLAB-Europe consortium. Till June 2014, the PALS RI has provided 4313 experimental days for a total of 41 projects with 303 international users from 42 different research institutions. Its principal experimental facility is a terawatt sub-ns iodine laser (1315?nm) with an optional plasma-based zinc XUV laser (21.2?nm), and an auxiliary Ti:Sapphire fs laser (1?J, 70?fs) exploited for femtosecond plasma probing and experiments with synchronised femtosecond and sub-nanosecond laser pulses at mean laser intensities of up to 30?PW/cm². The lasers are equipped with several target facilities and rich sets of instruments for both active and passive plasma diagnostics. The PALS main research areas include development and applications of secondary laser sources of high-energy ions and both coherent and non-coherent high-intensity XUV radiation, laboratory astrophysical and inertial fusion-relevant studies. In this paper, the main results having been achieved at PALS in the framework of LASERLAB-EUROPE international access activities during the last four years are highlighted.