RIBLL终端LASCAR闪烁体阵列探测器研制进展

介绍了RIBLL终端LASCAR闪烁体阵列探测器的工作原理和结构特点. 描述了为满足放射性核束实验的要求而对阵列所作的重要改进. 给出了LASCAR构型优化改造的工作设想和实施步骤. The principles and structure characteristics of LASCAR scintillator array detector at RIBLL terminal are described. Special emphases are laid upon the latest progress for the development of LASCAR array detector to meet the requirements of the RIB experiments. The working plan and steps for optimizing configuration of the LASCAR multi unit neutron scintillator array detector are also presented.     

大管径油气两相流流型变化机理的研究

本文对大直径水平和不同倾角的倾斜管道内油气混输流动的流型及流行转换进行了研究,探讨大直径油气混输管道不同倾斜度油气两相流动过程中段塞流的形成机理。在大型多相流流动模拟实验装置上,模拟油气在大直径管道内的混输流动。通过改变倾斜角度,研究倾角分别为1°、5°以及10°下的油气两相流流型及流型转换的特性,实验结果表明,倾斜角度对段塞流流型的产生及其变化影响显著。     

自旋场效应晶体管的原理和研究进展

基于电子具有自旋的特性,介绍了自旋场效应晶体管的基本原理和研究进展;通过研究发现自旋场效应晶体管具有良好的电导开关效应,外加磁场后则呈现出磁开关效应．     

High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling

Nano-sized magnetic Y₃Fe₅O₁₂ ferrite having a high heat generation ability in an AC magnetic field was prepared by bead milling. A commercial powder sample (non-milled sample) of ca. 2.9 μm in particle size did not show any temperature enhancement in the AC magnetic field. The heat generation ability in the AC magnetic field improved with a decrease in the average crystallite size for the bead-milled Y₃Fe₅O₁₂ ferrites. The highest heat ability in the AC magnetic field was for the fine Y₃Fe₅O₁₂ powder with a 15-nm crystallite size (the samples were milled for 4 h using 0.1 mm? beads). The heat generation ability of the excessively milled Y₃Fe₅O₁₂ samples decreased. The main reason for the high heat generation property of the milled samples was ascribed to an increase in the Néel relaxation of the superparamagnetic material. The heat generation ability was not influenced by the concentration of the ferrite powder. For the samples milled for 4 h using 0.1 mm? beads, the heat generation ability (W g⁻¹) was estimated using a 3.58×10⁻⁴ fH² frequency (f/kHz) and the magnetic field (H/kA m⁻¹), which is the highest reported value of superparamagnetic materials.     

Result of search for low velocity exotic particles

The L3＋C experiment, taking advantage of the L3 muon magnetic spectrometer, measured the spatial tracks of charged cosmic ray particles to obtain rigidity as well as velocity. One possible low velocity exotic particle is observed. The existing uncertainties are discussed, and the flux upper limit of the low velocity exotic particles from this observation is deduced based on the assumption of a null observation. The result is 6.2×10^-10 cm^-2·s^-1·sr^-1 at 90% confidence level in the velocity range from 0.04c to 0.5c.     

Advances in digital holographic micro-PTV for analyzing microscale flows

The accurate three-dimensional (3D) velocity field measurement technique has been receiving large attention in the study of microfluidics. DHM-PTV technique was developed by combining the digital holographic microscopy and particle tracking velocimetry technique. DHM-PTV is an ideal method for measuring three-component-three-dimensional (3C-3D) velocity field in a microscale flow with a fairly good spatial resolution. The advances in the DHM-PTV technique enable the measurement of various microscale flows, such as transport of red blood cells in a microtube and 3D flows in microfluidic devices. DHM-PTV is also applied in studying the motile behavior of swimming microorganisms. DHM-PTV would play an important role in ascertaining the undiscovered basic physics in various microscale and biofluid flow phenomena. In the current study, the basic principle of the DHM-PTV technique and its typical applications to microscale flows are introduced and discussed.     

基于蒙特卡罗方法的α粒子细胞S值计算

在放射性免疫治疗以及硼中子俘获治疗（BNCT）等放射性治疗过程中,粒子通过与人体组织材料相互作用产生次级电子将能量传递给人体组织,放射性核素在细胞尺度分布的不均匀性将严重影响靶区剂量分布。为深入了解放射性核素在细胞中不同位置分布对靶区剂量影响,采用基于历史凝聚算法的Monte Carlo 工具包Geant4编写了细胞S值计算程序。计算了2种细胞尺寸,12种粒子能量,3种源分布方式的细胞S值,与医学内照射剂量（MIRD）委员会解析算法的计算结果进行对比,发现两者差异在1%以内。证明了Geant4在m尺度下细胞剂量计算的可行性,并对BNCT治疗过程中产生的粒子(1.47 MeV与1.78 MeV)的细胞S值进行计算。     

Aerosol Measurement in Low‐Pressure Systems with Standard Scanning Mobility Particle Sizers

The scanning mobility particle sizer (SMPS) is one of the best known instruments for measuring particle size distributions in the submicron range. The SMPS consists of two parts: an electrostatic aerosol classifier (differential mobility particle analyser, DMA), followed by a counting device, in general a condensation particle counter (CPC). Unfortunately, commercial measurement devices such as the TSI DMA Model 3071 and the TSI CPC Model 3022 (TSI Inc., St. Paul, MN, USA), can be used only at nearly atmospheric pressure in the sampling line or in slight overpressure mode, but not in low‐pressure systems. A modification in the sampling line is shown which enhances the operating range of a standard SMPS system to low pressure. Samples taken under standard and low‐pressure conditions show good agreement in the measured particle size distributions and concentration. The behaviour observed in experimental studies agrees well with theoretical predictions.     

Reply to comment on “On the controversy around Daganzo’s requiem for and Aw-Rascle’s resurrection of second-order traffic flow models” by H.M. Zhang

This contribution compares several different approaches allowing one to derive macroscopic traffic equation directly from microscopic car-following models. While it is shown that some conventional approaches lead to theoretical problems, it is proposed to use an approach reminding of smoothed particle hydrodynamics to avoid gradient expansions. The derivation circumvents approximations and, therefore, demonstrates the large range of validity of macroscopic traffic equations, without the need of averaging over many vehicles. It also gives an expression for the “traffic pressure”, which generalizes previously used formulas. Furthermore, the method avoids theoretical inconsistencies of macroscopic traffic models, which have been criticized in the past by Daganzo and others.