ZrO2对Mn—O／γ—Al2O3催化剂中表面氧性能的影响

用ＴＰＤ－ＭＳ和ＴＰＲ技术研究了Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３和Ｍｎ－Ｏ／ＺｒＯ＋γ－Ａｌ２Ｏ３催化剂中表面氧的脱附、还原性能和再生氧化恢复性能，并用ＸＲＤ对催化剂的固相结构进行了表征。结果表明，Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３或Ｍｎ－Ｏ／ＺｒＯ２＋γ－Ａｌ２Ｏ３催化剂上存在ＭｎＯ２、Ｍｎ２Ｏ３和少量Ｍｎ３Ｏ４物种。ＺｒＯ２的存在不影响Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３的ＴＰＲ的ＴＰＤ的特征峰，但使ＭｎＯ２的量明显增加，     

Koexistenzbeziehungen,Darstellung und Eigenschaften ternärer Phasen im System Cu/Mo/O

Coexistence Relations, Preparation and Properties of Ternary Compounds in the System Cu/Mo/O The phase diagram of the ternary system Cu/Mo/O is presented at 773 K. The compounds CuMoO₄, Cu₃Mo₂O₉, Cu₄Mo₅O₁₇, Cu₆Mo₅O₁₈, Cu_4–xMo₃O₁₂, and Cu_xMoO₃ are found to be thermodynamical stable. The homogeneity range of Cu_4–xMo₃O₁₂ runs to x = 0.1–0.2. Single crystals of CuMoO₄ and Cu₃Mo₂O₉ were grown by chemical transport reactions with TeCl₄, Cl₂, HCl, and Br₂ as transport agent. The results were compared with thermochemical calculations. The decomposition of CuMoO₄ and Cu₃Mo₂O₉ was investigated with thermal analysis and decompositon pressure measurements.     

An electrochemically synthesized sulfonated polyaniline layer for positive charge carrier injection improvement in conjugated polymer devices

We report the use of sulfonated polyaniline, SPAN, as a positive charge transporting layer in organic electronic devices, demonstrating that it can be used to significantly improve injection into conjugated polymers. The introduction of an intermediate SPAN layer improves device rectification, even when low-work-function anode materials such as tin oxide are used.     

The furan approach to oxacycles. Part 5: Synthesis of a chiral butenolide, building block towards biologically interesting natural products

We describe an efficient new approach for the synthesis of a chiral butenolide that is based on the oxidation of a chiral furan ring with singlet oxygen in the presence of Hünig’s base, followed by Luche reduction and in situ lactonization.     

量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

星状四芳胺类空穴传输材料的合成

有机电致发光器件 (ＯＥＬＤ)是继阴极射线管平板显示器 (ＣＲＴ)和液晶显示器 (ＬＣＤ)之后的第三代平板显示器。它具有主动发光、驱动电压低(2伏左右 )、发光亮度高 (1 3 0 0 0ｃｄ ｍ2 以上 ) ,无软Ｘ 射线污染 ,响应速度快 (1 0 -6 ～ 1 0 -8秒 )等优点。从 1 987年美藉华人邓清云等提出多层结构的ＯＥＬＤ的器件结构以来的十多年间 ,ＯＥＬＤ以及其材料的研究已成为显示技术以及显示材料等方面的研究热点 ,发展很快[1～ 3] 。在 1 999年日本先锋公司已开发出了单色的汽车用ＯＥＬ平板显示器商品 ,今年东芝公司又开发出了 2 .7英寸的彩…     

Synthese und Kristallstruktur einer Neuen hexagonalen Modifikation von Al2S3 mit fünffach koordiniertem Aluminium

Synthesis and Crystal Structure of a Novel Hexagonal Modification of Al₂S₃ with Five-coordinated Aluminum A new hexagonal high temperature modification of Al₂S₃ could be prepared by chemical vapour transport with iodine (860 → 750°C) or by annealing of α -Al₂S₃ at 550°C. According to the single crystal X-ray structure determination the novel form of Al₂S₃ crystallizes in space group P 6₁ (No. 169) with a = 6.491(1), c = 17.169(4) Å, V = 626.5 ų, Z = 6; R = 0.0253. In this modification one half of the aluminum atoms are tetrahedrally coordinated [d(Al? S): 2.226–2.267 Å], whereas the other half are in trigonal bipyramidal coordination of five S atoms with bond lengths of 2.272–2.315 Å (equatorial) and 2.495–2.521 Å (axial). Aluminum in AlS₅ coordination is observed for the first time in this compound. The crystal structure is isotypic to In₂Se₃ and AlInS₃. In addition, results of a refinement of the α -Al₂S₃ crystal structure are reported which were obtained on crystals prepared also by chemical vapour transport with iodine.     

Electrophysical properties of titanates of alkaline-earth metals

Results on oxygen-ion, electron, and proton conduction and oxygen penetrability of titanates of alkaline-earth metals doped with acceptor admixtures are briefly reviewed. The applicability of these materials in electrochemical devices, in particular, as oxygen-penetrable membranes, is considered. The focus is on the studies carried out at the Institute of High-Temperature Electrochemistry, Ural Branch, Russian Academy of Sciences.     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.