High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Evaluation of phenyldimethylethoxysilane treated high-performance thin-layer chromatographic plates. Application to analysis of flavonoids inScutellariae radix

Summary The retention and selectivity of flavonoids (baicalin, baicalein, wogonin, oroxylin A) inScutellariae radix have been studies by high-performance thin-layer chromatography on phenyldimethylethoxysilane-treated silica plates. The silica plates treated with phenyl groups were used for physical and chemical analysis. From elemental carbon analysis, the maximum number of bonded phenyl surface groups per gram was calculated to be 0.467×10²¹ (Oginal silica plate: Merck Art. 15109, Silica gel 100 F₂₅₄). With methanol-1/15 M phosphate buffer (pH 6.2) mixtures as mobile phase, baicalin, baicalein, wogonin, and oroxylin A inScutellariae radix were separated. It has been shown that phenyl-treated plates are more suitable for selective separation of baicalin, baicalein, wogonin, and oroxylin A than octadecyl-treated plates.     

Surface free energies of styrene-acrylic acid copolymer plates prepared in various frames

Styrene (St)-acrylic acid (AA) copolymer plates were synthesized in the frames made of glass, aluminum (Al) and poly(difluoroethylene) (PDFE). Surface properties of the prepared copolymer plates were characterized with regard to critical surface tension ( _C ), chemical components by IR analysis and surface energies (total energy, _S ; dispersion force components, _S ^d ; polar component, _S ^p ; hydrogen bonding component, _S ^h ) and the following results were obtained.The _C values of the copolymer plates increased with AA content and also depended on the sort of the used frame. The increasing order of the _C values of the copolymer plates corresponded to those of the used frames, namely, PDFE frame < Al frame < Glass frame.The prepared copolymer plates with low AA contents (ca. 10 mol%) were enriched in the AA moiety in the surface layer regardless of the kind of the used frame.The total and the individual components of the surface free energies of the copolymer plates were largely affected by the property of the used frame. The glass frame gave the plate with higher _S ^h values suggesting preferential orientation of the polar site of AA component.     

矩形截面毛细管电泳和二维分离

在石英单晶表面制成矩矩截面毛细管柱中进行电泳实验。由于矩形柱比圆形柱有更大散热侧面积且石英单晶的导热性能远无于熔融石英，所以可施加较高的场强，不仅提高了柱效，而且缩矩了分离时间。两相交的通道之间形成自然连接，可实现二维分离，并消除死体积。     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Oblique Perforation of Thick Metallic Plates by Rigid Projectiles

Oblique perforation of thick metallic plates by rigid projectiles with various nose shapes is studied in this paper. Two perforation mechanisms, i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose, are considered in the proposed analytical model. It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers, i.e., the impact function, the geometry function of projectile, the non-dimensional thickness of target and the impact obliquity. Explicit formulae are obtained to predict the ballistic limit, residual velocity and directional change for the oblique perforation of thick metallic plates. The proposed model is able to predict the critical condition for the occurrence of ricochet. The proposed model is validated by comparing the predictions with other existing models and independent experimental data.The English text was polished by Keren Wang     

沿板平面材料梯度变化功能材料板件分析

本文发展一种功能梯度构件分析的细观元法.细观元法在构件的常规有限元内部设置密集观细单元以反映材料特性变化,又通过协调条件将各细观元结点自由度转换为同一常规有限元自由度,再上机计算.这种细观元法既能充分反映材料功能梯度沿各方向任意变化特性;而其计算单元又和常规有限元一样,是一种针对功能梯度结构分析的有效数值方法.现有功能梯度板件分析中无论对不同形状还是不同边界的功能梯度构件,其材料特性均沿板厚度方向梯度变化,本文用细观元法进行计算与分析,给出了目前尚未得到的沿板平面方向功能梯度变化构件的力学量三维分布形态.     

气相色谱矩形离子阱质谱联用仪的设计与性能

气相色谱离子阱质谱联用仪(GC-ITMS)广泛地应用于药物分析、环境分析、农药检测和食品分析、有机化学品分析、毒品分析以及医学和生物分析等领域。离子阱质谱作为色谱的检测器,决定了色质联用仪的分析性能,包括检出限、分辨率。离子阱质量分析器从传统的双曲型3D离子阱发展到2D线性离子阱,质量歧视效应得到了极大的改善,灵敏度得到了提高。矩形离子阱作为线性离子阱,结构简单,加工和装配容易,因此应用到GCMS系统中将具有非常大的优势。介绍了矩形离子阱质谱仪的设计方案、仪器整机的性能测试、质量分辨和质量歧视效应分析,与Agilent6890组成GCMS联用仪,对实际样品进行了分析。     

An FEM approximation for a fourth-order variational inequality of second kind

A fourth-order variational inequality of the second kind arising in a plate frictional bending problem is considered. By using regularization method, the original problem can be formulated as a differentiable variational equation, and the corresponding discrete FEM variational equation is presented afterwards. Abstract error estimates and error estimates of the approximation are derived in terms of energy norm and L^2-norm.