Macrocyclic oligoimides. I. Preparation of macrocyclic oligoetherimides via Kricheldorf substitution polymerization

Macrocyclic oligoetherimides were synthesized by means of Kricheldorf's nucleophilic aromatic substitution polycondensation. A solution containing equimolar quantities of bis(trimethylsilyl ether) of bisphenol and arylenebis(fluorophthalimide) was continuously added into a high boiling solvent containing CsF catalyst under a pseudo-high dilution condition. The resulting reaction mixture contained a high yield of cyclic oligomers which could be isolated by solvent extraction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 759–767, 1997     

Synthesis of silicon-containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Silicon-containing divinyl ether monomers were synthesized by the addition reaction of glycidyl vinyl ether ( 1 ) with various silyl dichlorides using tetra-n-butylammonium bromide (TBAB) as a catalyst. The reaction of 1 with diphenyl dichlorosilane gave bis-[1-(chloromethyl)-2-(vinyloxy)-ethyl]diphenyl silane ( 3a ) in 89% yield. Polycondensations of 3a with terephthalic acid were also carried out using 1,8-Diazabicyclo[5.4.0]-7-undecene (DBU) to afford silicon-containing polyfunctional vinyl ether oligomers ( 5 ). A multifunctional Si-monomer with both vinyl ether and methacrylate groups ( 7 ) was prepared by the reaction of 3a with potassium methacrylate using TBAB as a phase transfer catalyst. Photoinitiated cationic polymerizations of these vinyl ether compounds proceeded rapidly using the sulfonium salt, bis-[4-(diphenyl-sulfonio)phenyl]sulfide-bis-hexafluorophoshate (DPSP), as the cationic photoinitiator in neat mixtures upon UV irradiation. Multifunctional monomer 7 with both vinyl ether and methacrylate groups showed “hybrid curing properties” using both DPSP and the radical photoinitiator, 2,4,6-trimethylbenzoyl diphenylphoshine oxide (TPO). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3217–3225, 1997     

A one-pot method for the preparation of latices of telechelic oligomers,by ozonolysis of latices of polymers containing main-chain unsaturation

Poly(methyl methacrylate-co-butadiene), Poly(butyl methacrylate-co-butadiene) and Poly(methyl methacrylate-co-2,3-dimethyl butadiene) latices (a.k.a. latexes) were prepared by monomer-starved emulsion polymerization. The polymerizations were followed by GPC. It was found that the molecular-weight distribution did not alter significantly with conversion if the polymerizations were carried out at a feed rate of 0.03 cm³ s⁻¹ per 1000 cm³ of reaction medium and a temperature of 70°C. Slower rates of monomer addition led to broadening of the molecular-weight distribution. The resultant latices were swollen with varying amounts of toluene. Ozonolysis of the swollen and nonswollen latices yielded latices of polymer ozonides. Oxidation, with selenium oxide/hydrogen peroxide reagent, converted the ozonides to latices of carboxylic acid or methyl ketone ended telechelic oligomers. It was found that the molecular weights of the oligomers were a function of toluene concentration. Colloidal stability was found to be a function of end-group structure. Thus, carboxylic acid end groups impart extra stability to the colloid while methyl ketone end groups do not. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3255–3262, 1997     

The effect of branching on the physical properties of 73/27 4‐hydroxybenzoic acid/2‐hydroxy‐6‐naphthoic acid

The 73/27 4‐hydroxybenzoic acid (HBA)/2‐hydroxy‐6‐naphthoic acid (HNA) copolyester was prepared by the inclusion of two crosslinkable oligomers. These systems were synthesized by melt polymerization and characterized using differential scanning calorimetry, thermogravimetric analysis, polarized optical microscope and wide‐angle X‐ray diffraction. The transition from thermoplastic to thermosetting character occurred when 10 wt% or above of oligomer was added to the 73/27 HBA/HNA random mixture. The melt rheology of the HBA/HNA copolyesters containing two oligomers was investigated. The copolyesters displayed an increase in complex viscosity and transition from liquid‐like to solid‐like behavior as the oligomer content increased, and finally there was no melting transition when the oligomer content reached 10 wt%. Shear storage modulus measured by a dielectric mechanical analysis decreased slightly with increasing oligomer content. An adhesive test using an aluminum sheet revealed an increase in the lap shear strength up to 5 wt% of oligomer content without a significant reduction in shear storage modulus. On the other hand, the 73/27 HBA/HNA containing 10 wt% oligomer displayed a dramatic decrease in lap shear strength. Copyright © 1999 John Wiley & Sons, Ltd.     

Synthesis of an organosilicon hyperbranched oligomer containing alkenyl and silyl hydride groups

A new organosilicon hyperbranched oligomer has been prepared that contains both double bonds and silyl hydride groups. The monomer is prepared via the hydrosilylation of propargyl chloride with methyldichlorosilane in the presence of a platinum catalyst. The product is a mixture resulting from both α- and β-addition. Treatment of the monomer mixture with magnesium results in the formation of a hyperbranched oligomer, which is then treated with LiAlH₄. Control of monomer addition speed to the magnesium is critical in order to keep head-head coupling low. The resulting oligomer is air- and water-stable, and has an average degree of polymerization of 8. This material gives a char yield of 24% but after crosslinking with platinum catalyst, the char yield increases to 69%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3778–3784, 1999     

Bis[4-monosubstituted-5(4H)oxazolinones] as coupling agents for block copolymer synthesis: Reaction with amine-terminated oligomers and with hydroxy-terminated/amine-terminated oligomer mixtures

Block copolymers were prepared by the bulk reaction of mixtures of amine-terminated aliphatic polyamides and polyethers with bis[4-monosubstituted 5(4H)-oxazolinones] as the coupling agents. The simultaneous chain-coupling reaction of amine-terminated polyethers and hydroxy-terminated polyesters with these coupling agents also was investigated. As indicated by NMR and size exclusion chromatography studies, block copolymers of M_n ≥ 10,000 were obtained without side reactions in a much shorter reaction time than required when the conventional reaction was used between oligomers bearing mutually reactive end-groups. The block copolymers behaved as thermoplastic elastomers. Their thermal and thermomechanical properties were evaluated by differential scanning calorimetry and dynamic mechanical thermal analysis and compared to the block copolymers synthesized in the conventional way. When low molar mass oligomers were used (M_n ≤ 1000), copolymers of low crystallinity or amorphous copolymers were obtained. This was assigned to the disruption of chain regularity induced by the presence of the chain-coupling-agent moieties. However, properties comparable to those of copolymers obtained by using the conventional method were obtained by reacting oligomers of M_n ≥ 2000. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4412–4421, 1999     

Investigation of microwave energy to cure carbon fiber reinforced phenylethynyl-terminated polyimide composites,PETI-5/IM7

The application of microwave energy to the processing of carbon fiber reinforced phenylethynyl-terminated polyimide composites (PETI-5/IM7) was investigated and evaluated with a variable-frequency microwave furnace. The thermal and physical properties of the composites were measured by dynamic mechanical thermal analysis, thermogravimetric analysis, thermomechanical analysis, and density and composition tests. The mechanical properties were determined by 3-point-bending and short-beam-shear tests at both room temperature and 177 °C. The shear failure surfaces of both microwave- and thermally cured composites were detected with environmental scanning electron microscopy. A comparison of the thermal and microwave processes was conducted to evaluate the advantage of the microwave process. Microwave-cured composites, fabricated under various pressures at the fixed process temperatures, also were investigated. From these studies, it was concluded that microwave energy successfully was used to fabricate PETI-5/IM7 composites with higher glass-transition temperatures (by 11–16 °C) and higher retention in flexural strength, flexural modulus, and shear strength at 177 °C than those fabricated by the thermal process. Furthermore, the microwave processes required only half the time used for the standard thermal process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4616–4628, 1999     

苯胺四聚体与聚乙二醇嵌段及星型共聚物的合成及表征

以氨基封端的苯胺四聚体为基础, 通过将端氨基取代为不同数量的羧基, 得到了一系列连接臂数不同的苯胺四聚体-聚乙二醇共聚物, 对反应历程中的各阶段产物进行了结构表征, 并对苯胺四聚体及最终产物进行了电化学性能测试. 结构表征证明反应按照设计路线成功进行并得到了理想的产物; 循环伏安特性曲线表明, 共聚物基本保留了苯胺四聚体的电化学性能, 可以发生从还原态到中间态再到氧化态的转变.     

Linear and Nonlinear Optical Properties of Novel Multi-branched Oligomers

We investigate the fluorene-vinylene unit dependent photo-physical properties of multi-branched truxene based oligomers (Tr-OFV_n, n=1-4) employing steady-state absorption and emission spectroscopy, transient absorption spectroscopy, two-photon fluorescence, and z-scan technique. The results show that the increasing of fluorene-vinylene unit leads to a red-shift in the spectra of absorption and fluorescence, and shortens the excited state lifetime. Meanwhile, two-photon fluorescence efficiency and two-photon absorption cross section of truxene based oligomers gradually enhance in company with the extension of π-conjugated length. In addition, the values of two-photon absorption cross section modeled on the sum-over-state approach agree well with the experimental ones. The results indicate multi-branched truxene based oligomers bearing oligo(fluorene-vinylene) arms are promisingorganic materials for two-photon applications.     

Detection of Nanomole Quantities of Reducing Sugar by Liquid Chromatography

Abstract

The alkaline ferricyanide and the Park-Johnson's methods were studied in order to determine glucose oligomers separated by liquid chromatography in nanomole quantities. In the alkaline ferricyanide method, high sensitivity was obtained by measuring ultraviolet absorbance of the reduced reagents. The presence of some kinds of salts or alcohols did not affect the colour development of the reagents. The applicability of the present measuring system to an automatic sugar analyzer has been demonstrated by examining several glucose oligomers.