Water Injection into a Low-Permeability Rock - 1 Hydrofracture Growth

In this paper, we model water injection through a growing vertical hydrofracture penetrating a low-permeability reservoir. The results are useful in oilfield waterflood applications and in liquid waste disposal through reinjection. Using Duhamel's principle, we extend the Gordeyev and Entov (1997) self-similar 2D solution of pressure diffusion from a growing fracture to the case of variable injection pressure. The flow of water injected into a low-permeability rock is almost perpendicular to the fracture for a time sufficiently long to be of practical interest. We revisit Carter's model of 1D fluid injection (Howard and Fast, 1957) and extend it to the case of variable injection pressure. We express the cumulative injection through the injection pressure and effective fracture area. Maintaining fluid injection above a reasonable minimal value leads inevitably to fracture growth regardless of the injector design and the injection policy. The average rate of fracture growth can be predicted from early injection. A smart injection controller that can prevent rapid fracture growth is needed.     

亏损系统模态优化控制Riccati方程的求解方法

讨论亏损重复特征值的Ｒｉｃｃａｔｉ方程的模态控制算法．由于亏损特征值的Ｊｏｒｄａｎ块矩阵的阶数ｍ小于状态方程的阶数ｎ,即ｍ＜＜ｎ;所提出的模态控制算法可极大地减少计算工作量．其中的数值例子说明了该方法的有效性．     

大口径照相物镜制造与设计的综合考虑

给出了透射式 f′ =60 0mm ,D =40 0mm ,2ω =2 5° ,工作波段在 0 5～ 0 8μm之间的照相物镜的两个设计方案。考虑到在制造过程中可能存在的问题 ,作者对设计方案进行了分析和比较后选择了其中之一。     

The Optimal Error Estimate of the Fully Discrete Locally Stabilized Finite Volume Method for the Non-Stationary Navier-Stokes Problem

This paper proves the optimal estimations of a low-order spatial-temporal fully discrete method for the non-stationary Navier-Stokes Problem. In this paper, the semi-implicit scheme based on Euler method is adopted for time discretization, while the special finite volume scheme is adopted for space discretization. Specifically, the spatial discretization adopts the traditional triangle P1−P0 trial function pair, combined with macro element form to ensure local stability. The theoretical analysis results show that under certain conditions, the full discretization proposed here has the characteristics of local stability, and we can indeed obtain the optimal theoretic and numerical order error estimation of velocity and pressure. This helps to enrich the corresponding theoretical results.     

东亚地区大气环流的季节划分及其时空变化特征

利用NCEP-DOE Reanalysis 2 1979-2009年位势高度场、温度场、湿度场和风场逐日再分析资料,采用考虑面积权重的区域多要素最优分割法,对东亚地区大气环流的季节进行划分,并分析了四季起始时间的时空变化特征.研究结果表明:1)东亚地区春季最早始于中高纬地区的平流层和副热带的对流层中下层;夏季最早始于中高纬的平流层和副热带、中纬度地区的对流层中上层;秋、冬季开始最早的地区集中在东亚地区东部和东北部的对流层中低层,以及中高纬的平流层. 2)季节变化与环流形势密切相关,且对流层各个层次的夏季和冬季起始时间的分布均有较好的垂直一致性,平流层与对流层各季节起始时间分布有较大的差异性,平流层中层和下层也并不一致. 3)华北地区四季平均起始时间距平序列的逐年演变特征表明近30年该地区出现了6个四季起始时间异常偏早的年份,与El Niño活跃年份相一致,反映了海温等外强迫对大气环流季节变化的影响. 关键词： 季节划分 东亚地区 区域多要素最优分割法     

基于聚类和最佳指数的快速高光谱波段选择方法

最佳指数法是常用的高光谱图像数据波段选择方法,但存在运算时间过长的问题。运用K-means聚类算法,对最佳指数方法进行了改进,提出了聚类最佳指数法,并进行了一系列伪装目标识别的对比实验。实验结果表明,与最佳指数法相比,改进后的方法在保证目标分类精度的前提下,运算速度提高了数十倍;与单纯使用K-means聚类运算相比,不仅运算时间缩短,而且分类精度有所提高。利用改进算法能够在伪装环境下更加快速有效地识别目标。     

光学元件狭缝柔性调节机构的设计与分析

设计了一种狭缝柔性结构的光学元件调节机构,使光学元件在具备较高调节精度的同时,保持较高的导向精度。采用弹性力学应力函数法分析了狭缝柔性结构的刚度,以径向刚度与轴向刚度的比值为目标函数,对狭缝柔性结构尺寸参数进行了优化,在不超过柔性结构材料屈服应力等约束条件下,刚度比最优值达到1 573.6,较大的刚度比值可以减小调节机构的耦合位移,从而提高机构的导向精度。该结构加工装配方便,可实现三自由度(θx-θy-Z)调节。对优化后的柔性结构进行仿真分析,结果表明:径向刚度与轴向刚度比值的仿真值为1 660.4,解析值与仿真值误差为5.23%,证明了刚度分析方法的有效性。优化后的结构,轴向调节行程为2.09 mm,绕x轴偏转角度调节行程为±16.6 mrad,绕y轴偏转角度调节行程可达到±14.4 mrad,满足光学元件调节的大行程要求。     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

框架结构主动控制最优时滞研究

在结构振动主动控制中,时滞的大小对结构控制能量和响应均产生影响。在允许时滞的范围内,把结构控制能量和响应作为目标函数,数值仿真发现目标函数随着时滞的变化呈现曲线状态,这说明存在最优时滞。在目标函数处理方面,考虑到控制能量和响应数量级不一致,本文采用了无量纲化处理。同时,考虑到地震波的随机性,本文还推导了含控制力的改进的随机Newmark方法。最后给出了一个计算实例。实例表明本文所提出的方法是有效的。     

基于旋转式反射镜的飞行视觉系统设计

在MEMS麦克风贴片工艺中,真空吸嘴吸取MEMS芯片以后需要进行芯片位姿的精确校正。为实现高速高精度贴片功能,提出了一种基于旋转式反射镜的飞行视觉系统,该方案利用齿轮齿条将吸嘴的升降运动转化为反射镜的旋转运动,通过设计齿轮参数,实现反射镜不干涉吸嘴的拾放功能。当反射镜旋转到与水平位置夹角呈45°时,视觉系统可以获得MEMS芯片的静止的清晰图像,CCD相机采集一幅图像后,在贴片头飞行的过程中,控制系统完成MEMS芯片的位置和角度的校正。实验结果表明,该系统可以获取高质量MEMS芯片图像。该系统结构简单紧凑,成像无失真,不限制贴片头的运动轨迹,显著提高了MEMS芯片的贴片质量和贴片效率,可广泛地应用于贴片机系统中。