Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

Retention of ionizable compounds on HPLC. Modelling retention for neutral and ionizable compounds by linear solvation energy relationships

Summary A global LSER model that relates HPLC retention to mobile phase composition and pH is tested for a varied group of solutes, both neutral and ionizable, in a polymeric column and methanol-water mobile phases. It is compared to the local LSER model developed only for a given mobile phase, i.e., a fixed organic modifier content, and to the global LSER model set only for neutral solutes. The global LSER model for neutral and ionizable solutes requires a few supplementary parameters over the other models tested, but it accounts for retention under any experimental conditions for a given column and methanol-water mobile phases, describing properly the interactions established in the HPLC system (hydrophobicity, hydrogen-bond acidity and basicity, dipolarity/polarizability…). This paper is number 13 of a series with the same general title: “Retention of Ionizable Compounds on HPLC” published in various journals.     

A generalization of the Rouse-Zimm model

The idea of consistently averaging the hydrodynamic interaction and its various consequences for Hookean dumbbells are reviewed. For long chains this idea can be used to generalize the Rouse-Zimm model for polymer solutions. Unlike the usual Rouse-Zimm model, the new model for steady shear flow predicts a nonzero second normal stress coefficient and shear rate dependent material functions. In the limit of long chains, the viscosity and the normal stress coefficients are universal functions of the reduced shear rate.This paper was presented at the Frühjahrstagung des Fachausschusses Polymerphysik der Deutschen Physikalischen Gesellschaft at Kaiserslautern (West Germany), March 12–14, 1986.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.     

Cellulose: the structure slowly unravels

This article attempts to bring together basic and complex information which has been gathered on cellulose structure, principally that of native cellulose, over the last few decades. Even though advances have been made in the field of crystallography, powder crystallography cannot yield a definitive cellulose structure and single crystal diffraction is not possible due to the lack of suitable crystals. Knowledge obtained on the biosynthesis of native cellulose and on the polymorphy of cellulose and its derivatives help our understanding of ultrastructure. Many inconsistencies between early crystallographic studies of native cellulose have been clarified by the discovery that two polymorphs (α and β) of cellulose I exist. Models of the possible ultrastructural arrangements within native cellulose have been put forward over the decades; with advancement in technology, computer simulations of small and large systems are being created to test the viability of these ultrastructural models. It is hoped that this review will aid in the understanding of the complexity and uncertainties that still exist in this subject. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ionic conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] salts with univalent counter-ions in aqueous solutions

In order to determine the counter-anion effect on conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] backbone in aqueous solutions, a set of three polyelectrolytes with three different counter-ions: poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium]bromide P4VP164Br and its chlorate and tosylate derivatives P4VP164ClO₄ and P4VP164Ts respectively, were prepared by spontaneous polymerization of 4-vinylpyridine. This method gives a grafted polyelectrolyte having a positive charge on each pyridinic moiety on the backbone. The conductivities of cationic polyelectrolyte aqueous solution were determined in the concentration range from 10⁻⁴ to 10⁻² M at 25 °C. The variation of the conductivity versus concentration of the investigated system exhibits a typical polyelectrolyte behavior. The polycation mobility was found to be dependent on the counter-anion nature. Thus, the polyelectrolyte conductivity increases with the ion size. This shows that big ions are weakly or not associated to the backbone.In order to confirm this steric hindrance, we have considered the conductivities of these three anions Br⁻, ClO₄⁻ and Ts⁻ in their sodium salts, both alone and in the presence of 3,6,9-trioxadecanol (PEO164) free chains. In the two cases, the conductivities decrease in the order Λ_Br>Λ_ClO4>Λ_Ts.These results suggest that counter-ion mobility is mainly influenced by steric effect PEO164 grafted chains.Values of the conductivity predicted from Manning rod-like polyelectrolyte model were compared with our experimental results.     

Operation of the quasi-optical gyrotron at harmonics of the gyrofrequency

This paper investigates the performance of a quasioptical gyrotron, when the electron beam interacts with the radiation fields at harmonics of the gyrofrequency. The nonlinear equations of motion are obtained in the slow-timescale. The expression for the linear gain is derived and the conditions for excitation are given (frequency threshold, optimal operating point, bean current and resonator quality thresholds). In the nonlinear regime, it is shown that maximum efficiencies comparable to those at the fundemental (50%) are possible, albeit at a prohitively high radiation field amplitude, while realistically feasible field amplitudes can give somewhat smaller, but nevertheless still high efficiencies (15%). Finally, the results are suplemented by empirical scaling laws, useful for experimental designs.     

FRICTIONAL DISSIPATION AND NONLINEAR BAROTROPIC INSTABILITY

Based on the nonlinear quasi-geostrophic barotropic vorticity equation with Ekman friction, the criteria for nonlinear barotropic stability of the zonal basic flows are derived using Serrin-Joseph energy approach and through total energy, total enstrophy and their linear combination, separately, in terms of variational principle. Since the new transformation for Euler equation is utilized, the estimation of eigenvalue is more accurate, and the previous results of the author are improved very well.     

Randomly transitional phenomena in the system governed by Duffing's equation

This paper deals with turbulent or chaotic phenomena which occur in the system governed by Duffing's equation, a special type of two-dimensional periodic system. By using analog and digital computers, experiments are carried out with special reference to the change of attractors and of average power spectra of the random processes under the variation of the system parameters. On the basis of the experimental results, an outline of the random process is made clear. The results obtained in this paper will be applied to various physical problems and will also serve as material for the development of a proper mathematics of this phenomenon.