A ghost-cell immersed boundary method for large-eddy simulations of compressible turbulent flows

A methodology to perform a ghost-cell-based immersed boundary method (GCIBM) is presented for simulating compressible turbulent flows around complex geometries. In this method, the boundary condition on the immersed boundary is enforced through the use of ‘ghost cells’ that are located inside the solid body. The computations of variables on these ghost cells are achieved using linear interpolation schemes. The validity and applicability of the proposed method is verified using a three-dimensional (3D) flow over a circular cylinder, and a large-eddy simulation of fully developed 3D turbulent flow in a channel with a wavy surface. The results agree well with the previous numerical and experimental results, given that the grid resolution is reasonably fine. To demonstrate the capability of the method for higher Mach numbers, supersonic turbulent flow over a circular cylinder is presented. While more work still needs to be done to demonstrate higher robustness and accuracy, the present work provides interesting insights using the GCIBM for the compressible flows.     

Resonant control of solitons

It is shown that the effect of “scattering on resonance” can be used to control envelope solitons in the driven nonlinear Schrödinger equation. The control occurs by the frequency modulated driving with multiple crossing of the resonant frequency of the soliton.     

Screening of key odorants and anthocyanin compounds of cv. Okuzgozu (Vitis vinifera L.) red wines with a free run and pressed pomace using GC‐MS‐Olfactometry and LC‐MS‐MS

The principal purpose of the present work is to characterize the aroma, aroma‐active, and anthocyanin profiles of Okuzgozu wines and to observe the effect of the pomace pressing technique on these parameters. A total of 58 and 59 volatile compounds were identified and quantified in free‐run juice wine (FRW) and pressed pomace wine (PW). Alcohols were found as the most dominant group among aroma compounds followed by esters and acids. However, among all these compounds, only 11 and 13 of them could be considered as key odorants in aromatic extracts of FRW and PW, respectively. According to GC‐MS‐O analysis, ethyl octanoate (fruity), phenyl ethyl acetate (fruity), and 2‐phenyl ethanol (flowery) were found as the main contributors to the overall scent of both wines. Beyond the aroma profiles, anthocyanin contents of both types of wines were also investigated, and total 14 and 15 anthocyanins were identified and quantified in FRW and PW. Malvidin‐3‐glycoside and its acetyl and coumaroyl forms were identified as the dominant anthocyanins in both wines. It is worth noting the pressing application (2.0 atm) led to an increase of some unpleasant notes in the aroma providing chemical, pharmacy, and fermented aromas in wine. On the other hand, the wines produced with pressed pomace presented higher amounts of anthocyanins.     

Application of a biological‐based nanomagnetic catalyst in the synthesis of bis‐pyrazols and pyrano[3,2‐c]pyrazoles

{Fe₃O₄@SiO₂@(CH₂)₃‐thiourea dioxide‐SO₃H/HCl}, a newly reported nanomagnetic core–shell supported solid acid catalyst, was successfully employed in the preparation of 4,4′‐(arylmethylene)bis(1H –pyrazol‐5‐ol) and pyrano[3,2‐c ]pyrazole derivatives. The presented methods are very efficient and high‐yielding. Also, the catalyst exhibited powerful potential for reusability in both types of reactions.     

On the usage of NURBS as interface representation in free‐surface flows

When simulating free‐surface flows using the finite element method, there are many cases where the governing equations require information which must be derived from the available discretized geometry. Examples are curvature or normal vectors. The accurate computation of this information directly from the finite element mesh often requires a high degree of refinement—which is not necessarily required to obtain an accurate flow solution. As a remedy and an option to be able to use coarser meshes, the representation of the free surface using non‐uniform rational B‐splines (NURBS) curves or surfaces is investigated in this work. The advantages of a NURBS parameterization in comparison with the standard approach are discussed. In addition, it is explored how the pressure jump resulting from surface tension effects can be handled using doubled interface nodes. Numerical examples include the computation of surface tension in a two‐phase flow as well as the computation of normal vectors as a basis for mesh deformation methods. For these examples, the improvement of the numerical solution compared with the standard approaches on identical meshes is shown. Copyright © 2011 John Wiley & Sons, Ltd.     

The use of Sinc‐collocation method for solving Falkner–Skan boundary‐layer equation

The MHD Falkner–Skan equation arises in the study of laminar boundary layers exhibiting similarity on the semi‐infinite domain. The proposed approach is equipped by the orthogonal Sinc functions that have perfect properties. This method solves the problem on the semi‐infinite domain without truncating it to a finite domain and transforming domain of the problem to a finite domain. In addition, the governing partial differential equations are transformed into a system of ordinary differential equations using similarity variables, and then they are solved numerically by the Sinc‐collocation method. It is shown that the Sinc‐collocation method converges to the solution at an exponential rate. Copyright © 2010 John Wiley & Sons, Ltd.     

Improvement of moving particle semi‐implicit method for simulation of progressive water waves

Precise simulation of the propagation of surface water waves, especially when involving breaking wave, takes a significant place in computational fluid dynamics. Because of the strong nonlinear properties, the treatment of large surface deformation of free surface flow has always been a challenging work in the development of numerical models. In this paper, the moving particle semi‐implicit (MPS) method, an entirely Lagrangian method, is modified to simulate wave motion in a 2‐D numerical wave flume preferably. In terms of consecutive pressure distribution, a new and simple free surface detection criterion is proposed to enhance the free surface recognition in the MPS method. In addition, a revised gradient model is deduced to diminish the effect of nonuniform particle distribution and then to reduce the numerical wave attenuation occurring in the original MPS model. The applicability and stability of the improved MPS method are firstly demonstrated by the calculation of hydrostatic problem. It is revealed that these modifications are effective to suppress the pressure oscillation, weaken the local particle clustering, and boost the stability of numerical algorithm. It is then applied to investigate the propagation of progressive waves on a flat bed and the wave breaking on a mild slope. Comparisons with the analytical solutions and experimental results indicate that the improved MPS model can give better results about the profiles and heights of surface waves in contrast with the previous MPS models. Copyright © 2017 John Wiley & Sons, Ltd.