High-sensitivity analyses of metabolites in biological samples by capillary electrophoresis using dynamic pH junction-sweeping

Emerging fields of biochemical research, such as metabolomics, present challenges to current separation technologies because of the large number of metabolites present in a cell and their often low (submicromolar) concentration. Although capillary electrophoresis (CE) holds great promise as the method of choice for high-resolution separations of biological samples, it suffers from poor concentration sensitivity, especially with the use of UV detection. In CE, sweeping and dynamic pH junction represent two complementary on-line focusing techniques that have been used for sensitivity enhancement of hydrophobic and weakly acidic analytes, respectively. However, the application of either the sweeping or dynamic pH junction technique alone might, in some cases, be less effective for the analysis of certain sample mixtures. Recent work in the development of a hyphenated dynamic pH junction-sweeping technique is presented as an effective on-line method of preconcentration suitable for both hydrophilic (anionic) and hydrophobic (neutral) analytes. Sensitive analyses of flavin metabolites by CE with laser-induced fluorescence (LIF) detection is demonstrated in various biological matrixes, including cell extracts of Bacillus subtilis, pooled human plasma, as well as heat-deproteinized flavoenzymes. Enhanced analyte band narrowing and improved sensitivity is achieved for flavins using dynamic pH junction-sweeping compared to either sweeping or dynamic pH junction alone. This results in over a 1200-fold improvement in sensitivity relative to conventional injection methods, giving a limit of detection (LOD, defined as S/N = 3) of about 4.0 x 10(-12) M. Strategies for sensitive and more comprehensive analyses of other cell metabolites, including nucleotides, coenzymes, and steroids, are also discussed when using on-line focusing techniques in conjunction with multiplexed CE and UV detection.     

A practical approach to the implementation of autoverify

Autoverification is a process in which computer software will automatically evaluate laboratory test results, verify result integrity, and then release the results to the hospital interface without any technologist intervention. Autoverify release criteria are user defined and can be customized. The process of developing, implementing, and monitoring autoverify is achievable for most test results in laboratory medicine. The use of autoverification will improve result quality, increase revenue, and create faster turn-around times. All of this put together will ultimately lead to improved customer satisfaction. Computers and autoverification are survival tools in the competitive market of laboratory diagnostics services.Presented at the 8th Conference on Quality in the Spotlight, 17–18 March 2003, Antwerp, Belgium     

DYNAMIC PROPERTIES OF MAIN SOUNDER IN BLACK CICADA (C. atrata Fabricius)~*

In this paper, the dynamic properties of the main sounder (the sounding muscle (SMc) and the sounding membrane (SM)) and the generating mechanism of amplitude-modulation pulse train (AMPT) are given. The acting process of SMc is a quasi-simple harmonic contraction vibration. The amplitudes of soundless and sounding contracting motion are about 17.2 /μm and 29.4/μm, respectively, and the efficiency of dynamic sounding is about 17％, The unsounded motion of SM is a quasi-simple harmonic vibration, and the amplitude is about 7.81/μm. The sounding motion of SM is a complex vibration, and the amplitude is about 12.66 μm. In each syllable of the song, AMPT_(1,2,3) are separately produced by driving vibrations (V_1,2,3)) of three long ribs in the upper half of SM, and the peaks of V_(1,2,3) lead the first pulse of high amplitude in AMPT_(1,2,3) by 0.156 ms, respectively. The membrane structure in the lower half of SM is mainly to transmit contracting movement of SMc.     

动力学涂层毛细管电泳分离双链脱氧核糖核酸片段

以异丙醇为聚合反应链转移试剂，水相法合成了短链聚N，N－二甲基丙烯酰胺（PDMA），研究表明，该聚合物能在毛细管内壁形成稳定的动力学涂层，从而有效地抑制电渗流和毛细管内壁与DNA的作用。这种介质被成功地应用于DNA片段的高效分离。     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.     

Dynamics of end-grafted polystyrene brushes in theta solvents

The dynamics of the concentration fluctuations in end-grafted polystyrene brushes in a theta solvent (cyclohexane) are probed by evanescent wave dynamic light scattering at different wavevectors q and temperatures. When the solvent quality changes from marginal to poor, the relaxation function C(q, t) exhibits strong effects as compared with the smooth variation of the brush density profile. From a single exponential above 50 °C, C(q, t) becomes a two-step decay function. The fast decay is still assigned to the cooperative diffusion albeit slower than in the good solvent regime whereas the slow nonexponential and nondiffusive process might relate to microsegragated and/or chain dynamics in the present polydisperse brush. The relaxation function of the present three brushes with different grafting density reveals similarities and disparities between wet brushes and semidilute polymer solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3590–3597, 2006     

生物检材中乌头类生物碱的检验

 用薄层 (TLC)、高效液相 光电二极管阵列检测器 (HPLC/DAD)、动物实验等方法对生物检材中乌头生物碱进行检验 ,并对这些方法进行比较。结果发现 ,TLC法为此类药物检验筛选的首选方法 ,最小检出量为 0 3μg。在进行HPLC检测时 ,以乌头生物碱的特征紫外吸收光谱和动物实验结果为重要的定性手段 ,其特征吸收波长为 (2 2 8± 2 )nm和 (2 75± 2 )nm。乌头生物碱在 2mg/L～ 5 0mg/L时其峰面积与质量浓度有很好的线性 ,相关系数为 0 9996。经实际案件证明 ,方法准确、灵敏 ,可用于生物检材中乌头类生物碱的检验。     

A structure-based design approach for the identification of novel inhibitors: application to an alanine racemase

We report a new structure-based strategy for the identification of novel inhibitors. This approach has been applied to Bacillus stearothermophilus alanine racemase (AlaR), an enzyme implicated in the biosynthesis of the bacterial cell wall. The enzyme catalyzes the racemization of l- and d-alanine using pyridoxal 5-phosphate (PLP) as a cofactor. The restriction of AlaR to bacteria and some fungi and the absolute requirement for d-alanine in peptidoglycan biosynthesis make alanine racemase a suitable target for drug design. Unfortunately, known inhibitors of alanine racemase are not specific and inhibit the activity of other PLP-dependent enzymes, leading to neurological and other side effects.This article describes the development of a receptor-based pharmacophore model for AlaR, taking into account receptor flexibility (i.e. a `dynamic' pharmacophore model). In order to accomplish this, molecular dynamics (MD) simulations were performed on the full AlaR dimer from Bacillus stearothermophilus (PDB entry, 1sft) with a d-alanine molecule in one active site and the non-covalent inhibitor, propionate, in the second active site of this homodimer. The basic strategy followed in this study was to utilize conformations of the protein obtained during MD simulations to generate a dynamic pharmacophore model using the property mapping capability of the LigBuilder program. Compounds from the Available Chemicals Directory that fit the pharmacophore model were identified and have been submitted for experimental testing.The approach described here can be used as a valuable tool for the design of novel inhibitors of other biomolecular targets.